BIS IS 2062 : 2011(R2016)
Current
Current
The latest, up-to-date edition.
HOT ROLLED MEDIUM AND HIGH TENSILE STRUCTURAL STEEL - SPECIFICATION
Published date
12-01-2013
Publisher
Sorry this product is not available in your region.
FOREWORD
1 SCOPE
2 REFERENCES
3 TERMINOLOGY
4 SUPPLY OF MATERIAL
5 GRADES
6 MANUFACTURE
7 FREEDOM FROM DEFECTS
8 CHEMICAL COMPOSITION
9 SELECTION AND PREPARATION OF TEST SAMPLES
10 TENSILE TEST
11 BEND TEST
12 IMPACT TEST
13 Y GROOVE CRACKABILITY TEST
14 OTHER TESTS
15 DIMENSIONS
16 TOLERANCES
17 RE-TESTS
18 CALCULATION OF MASS
19 DELIVERY
20 MARKING
ANNEX A - COMMITTEE COMPOSITION
Specifies the requirements of steel including micro-alloyed steel plates, strips, shapes and sections (angles, tees, beams, channels, etc.), flats, bars, etc., for use in structural work.
| Committee |
MTD 4
|
| DevelopmentNote |
Supersedes BIS IS 8500, BIS IS 1977 & BIS IS 226. (09/2008)
|
| DocumentType |
Standard
|
| PublisherName |
Bureau of Indian Standards
|
| Status |
Current
|
| Supersedes |
| BIS IS 4925 : 2004(R2009) | CONCRETE BATCHING AND MIXING PLANT - SPECIFICATION |
| BIS IS 2911-1-4 : 2010 | DESIGN AND CONSTRUCTION OF PILE FOUNDATIONS - CODE OF PRACTICE - PART 1: CONCRETE PILES - SECTION 4: PRECAST CONCRETE PILES IN PREBORED HOLES |
| BIS IS 3196-1 : 2013 | WELDED LOW CARBON STEEL CYLINDERS EXCEEDING 5 LITRE WATER CAPACITY FOR LOW PRESSURE LIQUEFIABLE GASES - PART 1: CYLINDERS FOR LIQUEFIED PETROLEUM GASES (LPG) - SPECIFICATION |
| BIS IS 10386-11 : 2012 | SAFETY CODE FOR CONSTRUCTION, OPERATION AND MAINTENANCE OF RIVER VALLEY PROJECTS - PART 11: UNDERGROUND EXCAVATION |
| BIS IS 2911-1-3 : 2010 | DESIGN AND CONSTRUCTION OF PILE FOUNDATIONS - CODE OF PRACTICE - PART 1: CONCRETE PILES - SECTION 3: DRIVEN PRECAST CONCRETE PILES |
| BIS IS 13291 : 2012(R2017) | CONCRETE BLOCK MAKING MACHINE - GENERAL REQUIREMENTS |
| BIS IS 5244 : 2014 AMD 1 2015 | SAFE DEPOSIT LOCKER CABINETS - SPECIFICATION |
| BIS IS 3196-4 : 2001 AMD 2 2009 | WELDED LOW CARBON STEEL CYLINDERS EXCEEDING 5 LITRE WATER CAPACITY FOR LOW PRESSURE LIQUEFIABLE GASES - SPECIFICATION - PART 4: CYLINDERS FOR TOXIC AND CORROSIVE GASES |
| IS 726 : 2022 | Galvanized Steel Buckets for General Use-Specification |
| BIS IS 14106 : 1996(R2017) | DIRECT ACTION HANDPUMPS - SPECIFICATION |
| BIS IS 15859 : 2013 | COTTON SEED DELINTING MACHINERY - BUFFING MACHINE WITH AIR JET AND NYLON BRUSH - SPECIFICATION |
| BIS IS 15860 : 2013 | COTTON SEED DELINTING MACHINERY - AMMONIA COTTON SEED NEUTRALIZER MACHINE WITH AMMONIA VAPORIZER - SPECIFICATION |
| BIS IS 11388 : 2012(R2017) | RECOMMENDATIONS FOR DESIGN OF TRASH RACKS FOR INTAKES |
| BIS IS 7312 : 1993 AMD 3 2007 | WELDED AND SEAMLESS STEEL DISSOLVED ACETYLENE GAS CYLINDER - SPECIFICATION |
| BIS IS 15542 : 2005 | POWER-OPERATED CHAFF CUTTER - SAFETY REQUIREMENTS |
| BIS IS 1161 : 2014 | STEEL TUBES FOR STRUCTURAL PURPOSES - SPECIFICATION |
| BIS IS 13404 : 2012(R2017) | POWER TROWEL - GENERAL REQUIREMENTS |
| BIS IS 2911-1-1 : 2010 | DESIGN AND CONSTRUCTION OF PILE FOUNDATIONS - CODE OF PRACTICE - PART 1: CONCRETE PILES - SECTION 1: DRIVEN CAST IN-SITU CONCRETE PILES |
| BIS IS 9595 : 1996(R2003) | METAL-ARC WELDING OF CARBON AND CARBON MANGANESE STEELS - RECOMMENDATIONS |
| ASME PV CODE 2A : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - FERROUS MATERIAL SPECIFICATIONS (BEGINNING TO SA-450) AND (SA-451 TO END) |
| BIS IS 15861 : 2013 | COTTON SEED DELINTING MACHINERY - POLLUTION CONTROL SYSTEM WITH SCRUBBER, CYCLONE, CHIMNEY, HOODS AND DUCTING - SPECIFICATION |
| BIS IS 15862 : 2013 | COTTON SEED DELINTING MACHINERY - HCL GAS GENERATION UNIT - SPECIFICATION |
| BIS IS 15856 : 2010 | COTTON SEED DELINTING MACHINERY - PRE-HEATING MACHINE - SPECIFICATION |
| BIS IS 10558 : 2013 | ALUMINIUM SHORE GANGWAYS - SPECIFICATION |
| BIS IS 15977 : 2013 | CLASSIFICATION AND ACCEPTANCE TESTS FOR BARE SOLID WIRE ELECTRODES AND WIRE FLUX COMBINATION FOR SUBMERGED ARC WELDING OF STRUCTRUAL STEEL - SPECIFICATION |
| BIS IS 800 : 2007 AMD 1 2012 | GENERAL CONSTRUCTION IN STEEL - CODE OF PRACTICE |
| BIS IS 629 : 2013 | BICYCLE - HUB ASSEMBLY - SPECIFICATION |
| BIS IS 7142 : 1995(R2006) | WELDED LOW CARBON STEEL CYLINDERS FOR LOW PRESSURE LIQUEFIABLE GASES NOT EXCEEDING 5 LITRE WATER CAPACITY - SPECIFICATION |
| BIS IS 1281 : 2014 | BICYCLES - CRANKS AND CHAIN WHEELS - SPECIFICATION |
| BIS IS 12778 : 2004 | HOT ROLLED PARALLEL FLANGE STEEL SECTIONS FOR BEAMS, COLUMNS AND BEARING PILES - DIMENSIONS AND SECTION PROPERTIES |
| BIS IS 8442 : 2008 | STAND POST TYPE WATER AND FOAM MONITOR FOR FIRE FIGHTING - SPECIFICATION |
| BIS IS 13152-1 : 2013 | PORTABLE SOLID BIO-MASS COOKSTOVE (CHULHA) - SPECIFICATION |
| BIS IS 15419 : 2004 | JIB CRANES - CODE OF PRACTICE |
| BIS IS 15561 : 2005 | SUGARCANE CRUSHERS - SAFETY REQUIREMENTS |
| BIS IS 1786 : 2008 AMD 3 2017 | HIGH STRENGTH DEFORMED STEEL BARS AND WIRES FOR CONCRETE REINFORCEMENT - SPECIFICATION |
| BIS IS 807 : 2006 | DESIGN, ERECTION AND TESTING (STRUCTURAL PORTION) OF CANES AND HOISTS - CODE OF PRACTICE |
| BIS IS 15947-2 : 2012(R2017) | CONCRETE DELIVERY PIPELINES - PART 2: GENERAL REQUIREMENTS FOR PIPELINE ACCESSORIES |
| BIS IS 456 : 2000(R2016) | PLAIN AND REINFORCED CONCRETE CODE - OF PRACTICE |
| BIS IS 16045 : 2013 | COPPER ALLOY SCREW - DOWN STOP VALVES AND STOP AND CHECK VALVES FOR MARINE APPLICATION - SPECIFICATION |
| BIS IS 15998 : 2013 | CAST IRON, SPHEROIDAL/NODULAR CAST IRON AND CAST STEEL SCREW-DOWN STOP VALVES AND STOP AND CHECK VALVES FOR MARINE APPLICATIONS - SPECIFICATION |
| BIS IS 15855 : 2010 | COTTON SEED DELINTING MACHINERY - SURGE BIN MACHINE - SPECIFICATION |
| BIS IS 1996 : 2003 | LABORATORY GLASSWARE - STRAIGHT-BORE GLASS STOPCOCKS FOR GENERAL PURPOSES |
| BIS IS 1570-1 : 1978(R2014) | SCHEDULES FOR WROUGHT STEELS - PART 1: STEELS SPECIFIED BY TENSILE AND/OR YIELD PROPERTIES |
| BIS IS 814 : 2004(R2010) | COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF CARBON AND CARBON MANGANESE STEEL - SPECIFICATION |
| BIS IS 12466 : 2012(R2017) | BUILDER'S HOIST - GENERAL REQUIREMENTS |
| BIS IS 15769 : 2008 | FLUX CORED (TUBULAR) ELECTRODES FOR GAS SHIELDED AND SELF-SHIELDED METAL WELDING OF CARBON OR CARBON-MANGANESE STEEL |
| BIS IS 2911-1-2 : 2010 | DESIGN AND CONSTRUCTION OF PILE FOUNDATIONS - CODE OF PRACTICE - PART 1: CONCRETE PILES - SECTION 2: BORED CAST IN-SITU CONCRETE PILES |
| BIS IS 3177 : 1999(R2004) | CODE OF PRACTICE FOR ELECTRIC OVERHEAD TRAVELLING CRANES AND GANTRY CRANES OTHER THAN STEEL WORK CRANES |
| BIS IS 15858 : 2013 | COTTON SEED DELINTING MACHINERY - DELINTING MACHINE WITH ELECTRICAL HEATING AND HYDRAULIC SYSTEM - SPECIFICATION |
| BIS IS 6533-2 : 1989(R2003) | CODE OF PRACTICE FOR DESIGN AND CONSTRUCTION OF STEEL CHIMNEY - PART 2: STRUCTURAL ASPECT |
| BIS IS 14846 : 2000 AMD 3 2010 | SLUICE VALVE FOR WATER WORKS PURPOSES (50 TO 1200 MM SIZE) - SPECIFICATION |
| BIS IS 3196-2 : 2006 AMD 2 2015 | WELDED LOW CARBON STEEL CYLINDERS EXCEEDING 5 LITRE WATER CAPACITY FOR LOW PRESSURE LIQUEFIABLE GASES - PART 2: CYLINDERS FOR LIQUEFIABLE NON-TOXIC GASES OTHER THAN LPG - SPECIFICATION |
| BIS IS 11188-1 : 2014 AMD 1 2015 | VAULT (STRONG ROOM) DOORS - PART 1: SPECIFICATION |
| BIS IS 1173 : 1978(R2004) | HOT ROLLED SLIT STEEL TEE BARS |
| BIS IS 10182-2 : 1985(R2001) | DIMENSIONS AND TOLERANCES FOR HOT-ROLLED TRACK SHOE SECTIONS |
| BIS IS 1732 : 1989(R2014) | STEEL BARS, ROUND AND SQUARE FOR STRUCTURAL AND GENERAL ENGINEERING PURPOSES - DIMENSIONS |
| BIS IS 1757 : 1988(R2009) | METHOD FOR CHARPY IMPACT TEST (V-NOTCH) FOR METALLIC MATERIAL |
| BIS IS 808 : 1989(R2014) | DIMENSIONS FOR HOT ROLLED STEEL BEAM, COLUMN, CHANNEL AND ANGEL SECTIONS |
| BIS IS 1852 : 1985(R2013) | SPECIFICATION FOR ROLLING AND CUTTING TOLERANCES FOR HOT-ROLLED STEEL PRODUCTS |
| BIS IS 10182-1 : 1982(R2001) | DIMENSIONS AND TOLERANCES FOR HOT ROLLED TRACK SHOE SECTIONS - PART 1: SECTION TS-L1 |
| BIS IS 2314 : 1986(R2003) | SPECIFICATION FOR STEEL SHEET PILING SECTIONS |
| BIS IS 3803-1 : 1989(R2010) | STEEL - CONVERSION OF ELONGATION VALUES - PART 1: CARBON AND LOW ALLOY STEELS |
| BIS IS 1252 : 1991(R2003) | DIMENSIONS OF HOT ROLLED STEEL BULB ANGLES |
| BIS IS 10842 : 1984(R2010) | EVALUATION PROCEDURE FOR Y-GROOVE WELD CRACKABILITY TEST IN STRUCTURAL STEEL |
| BIS IS 3954 : 1991(R2006) | HOT ROLLED STEEL CHANNEL SECTIONS FOR GENERAL ENGINEERING PURPOSES - DIMENSIONS |
| BIS IS 1599 : 2012(R2017) | METALLIC MATERIALS - BEND TEST |
| BIS IS 1863 : 1979(R2004) | HOT ROLLED STEEL BULB FLATS |
| BIS IS 1730 : 1989(R2009) | STEEL PLATES, SHEETS, STRIPS AND FLATS FOR STRUCTURAL AND GENERAL ENGINEERING PURPOSES - DIMENSIONS |
| BIS IS 1608 : 2005 | METALLIC MATERIALS - TENSILE TESTING AT AMBIENT TEMPERATURE |
| BIS IS 12778 : 2004 | HOT ROLLED PARALLEL FLANGE STEEL SECTIONS FOR BEAMS, COLUMNS AND BEARING PILES - DIMENSIONS AND SECTION PROPERTIES |
| BIS IS 12779 : 1989(R2004) | ROLLING AND CUTTING TOLERANCES FOR HOT ROLLED PARALLEL FLANGE BEAM AND COLUMN SECTIONS |
| BIS IS 8910 : 2010 | GENERAL TECHNICAL DELIVERY REQUIREMENTS FOR STEEL AND STEEL PRODUCTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.