BIS IS 2824 : 2007
Current
The latest, up-to-date edition.
METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS
12-01-2013
NATIONAL FOREWORD
1. SCOPE
2. NORMATIVE REFERENCES
3. TERMS AND DEFINITIONS
4. PRINCIPLE
5. TEST SPECIMEN
6. TEST SPECIMEN CONDITIONING
7. TEST APPARATUS
8. BASIC TEST PROCEDURE
9. DETERMINATION OF EROSION
10. DETERMINATION OF PROOF TRACKING
INDEX (PTI)
11. DETERMINATION OF COMPARATIVE
TRACKING INDEX (CTI)
ANNEX A (INFORMATIVE) - LIST OF FACTORS THAT
SHOULD BE CONSIDERED BY PRODUCT COMMITTEES
ANNEX B (INFORMATIVE) - ELECTRODE MATERIAL
SELECTION
BIBLIOGRAPHY
Describes the method of test for the determination of the proof and comparative tracking indices of solid insulating materials on pieces taken from parts of equipment and on plaques of material using alternating voltages.
| Committee |
ETD 2
|
| DocumentType |
Standard
|
| PublisherName |
Bureau of Indian Standards
|
| Status |
Current
|
| Standards | Relationship |
| IEC 60112:2003+AMD1:2009 CSV | Identical |
| BIS IS 1293 : 2005 AMD 6 2013 | PLUGS AND SOCKET-OUTLETS OF RATED VOLTAGE UP TO AND INCLUDING 250 VOLTS AND RATED CURRENT UP TO 16 AMPERES - SPECIFICATION |
| BIS IS 15368 : 2003 | CABLE REELS FOR HOUSEHOLD AND SIMILAR PURPOSES |
| BIS IS 13947-5-2 : 2004 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - SPECIFICATION - PART 5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - SECTION 2: PROXIMITY SWITCHES |
| BIS IS/IEC 60079-2 : 2007 | EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' |
| BIS IS/IEC 60079-15 : 2005 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 15: CONSTRUCTION, TEST AND MARKING OF TYPE OF PROTECTION 'N' ELECTRICAL APPARATUS |
| BIS IS 13252-1 : 2010 AMD 1 2013 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| BIS IS/IEC 60079-11 : 2006 | EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY INTRINSIC SAFETY 'I' |
| BIS IS/IEC 60898-1 : 2002 | ELECTRICAL ACCESSORIES - CIRCUIT-BREAKERS FOR OVER CURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR AC OPERATION |
| BIS IS/IEC 60947-5-1 : 2003 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - SECTION 1: ELECTROMECHANICAL CONTROL CIRCUIT DEVICES |
| BIS IS 1258 : 2005(R2015) | BAYONET LAMP HOLDERS |
| BIS IS 302-1 : 2008 AMD 3 2014 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| BIS IS/IEC 60079-1 : 2007 | EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' |
| BIS IS 10322-1 : 2014 | LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS |
| BIS IS 3854 : 1997(R2017) | SWITCHES FOR DOMESTIC AND SIMILAR PURPOSES - SPECIFICATION |
| BIS IS 14772 : 2000(R2015) | GENERAL REQUIREMENTS FOR ENCLOSURES FOR ACCESSORIES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - SPECIFICATION |
| BIS IS/IEC 60079-7 : 2006 | EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' |
| BIS IS 12640-1 : 2008 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS FOR HOUSEHOLD AND SIMILAR USES - PART 1: CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION (RCCBS) |
| BIS IS/IEC 60947-4-1 : 2000 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4: CONTACTORS AND MOTOR-STARTERS - SECTION 1: ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS |
| BIS IS 2148 : 2004 AMD 2 2008 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - FLAMEPROOF ENCLOSURES "D" |
| ISO 293:2004 | Plastics — Compression moulding of test specimens of thermoplastic materials |
| ISO 3167:2014 | Plastics Multipurpose test specimens |
| ISO 294-3:2002 | Plastics Injection moulding of test specimens of thermoplastic materials Part 3: Small plates |
| ISO 295:2004 | Plastics — Compression moulding of test specimens of thermosetting materials |
| BIS IS 10581 : 1983(R2015) | METHODS OF TEST FOR THE DETERMINATION OF IONIC IMPURITIES IN ELECTRICAL INSULATING MATERIALS BY EXTRACTION WITH LIQUIDS |
| BIS IS 13360-2-1 : 1992(R2003) | PLASTICS - METHODS OF TEST - PART 2: SAMPLING AND PREPARATION OF TEST SPECIMENS - SECTION 1: COMPRESSION MOULDING TEST SPECIMENS OF THERMOPLASTICS MATERIALS |
| BIS IS 13360-2-3 : 2000 AMD 2 2013 | PLASTICS - METHODS OF TESTING - PART 2: SAMPLING AND PREPARATION OF TEST SPECIMENS - SECTION 3: INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - GENERAL PRINCIPLES |
| IEC 60589:1977 | Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids |
| IEC TR 62062:2002 | Results of the Round Robin series of tests to evaluate proposed amendments to IEC 60112 |
| IEC GUIDE 104:2010 | The preparation of safety publications and the use of basic safety publications and group safety publications |
| ISO 294-1:2017 | Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens |
| IEC 60587:2007 | Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion |
| BIS IS 13360-2-7 : 2000(R2003) | PLASTICS - METHODS OF TESTING - PART 2: SAMPLING AND PREPARATION OF TEST SPECIMENS - SECTION 7: INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - SMALL PLATES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.