BIS IS 2911-1-1 : 2010
Current
The latest, up-to-date edition.
DESIGN AND CONSTRUCTION OF PILE FOUNDATIONS - CODE OF PRACTICE - PART 1: CONCRETE PILES - SECTION 1: DRIVEN CAST IN-SITU CONCRETE PILES
12-01-2013
FOREWORD
1. SCOPE
2. REFERENCES
3. TERMINOLOGY
4. NECESSARY INFORMATION
5. EQUIPMENTS AND ACCESSORIES
6. DESIGN CONSIDERATIONS
7. MATERIALS AND STRESSES
8. WORKMANSHIP
ANNEX A - LIST OF REFERRED INDIAN STANDARDS
ANNEX B - LOAD-CARRYING CAPACITY OF PILES - STATIC
ANALYSIS
ANNEX C - ANALYSIS OF LATERALLY LOADED PILES
ANNEX D - DATA SHEET
ANNEX E - COMMITTEE COMPOSITION
Specifies the design and construction of driven cast in-situ concrete piles which transmit the load to the soil by resistance developed either at the pile tip by end bearing or along the surface of the shaft by friction or by both.
| Committee |
CED 43
|
| DocumentType |
Standard
|
| PublisherName |
Bureau of Indian Standards
|
| Status |
Current
|
| BIS IS 2911-4 : 2013 | DESIGN AND CONSTRUCTION OF PILE FOUNDATIONS - CODE OF PRACTICE - PART 4: LOAD TEST ON PILES |
| BIS IS 1893-1 : 2016 | CRITERIA FOR EARTHQUAKE RESISTANT DESIGN OF STRUCTURES - PART 1: GENERAL PROVISIONS AND BUILDINGS |
| BIS IS 1489-2 : 2015 | PORTLAND POZZOLANA CEMENT - SPECIFICATION - PART 2: CALCINED CLAY BASED |
| BIS IS 12330 : 1988(R2005) | SPECIFICATION FOR SULPHATE RESISTING PORTLAND CEMENT |
| BIS IS 1892 : 1979(R2002) | CODE OF PRACTICE FOR SUBSURFACE INVESTIGATIONS FOR FOUNDATIONS |
| BIS IS 2911-4 : 2013 | DESIGN AND CONSTRUCTION OF PILE FOUNDATIONS - CODE OF PRACTICE - PART 4: LOAD TEST ON PILES |
| BIS IS 432-1 : 1982(R2015) | SPECIFICATION FOR MILD STEEL AND MEDIUM TENSILE STEEL BARS AND HARD-DRAWN STEEL WIRE FOR CONCRETE REINFORCEMENT - PART 1: MILD STEEL AND MEDIUM TENSILE STEEL BARS |
| BIS IS 8041 : 1990(R2005) | SPECIFICATION FOR RAPID HARDENING PORTLAND CEMENT |
| BIS IS 269 : 2015 | ORDINARY PORTLAND CEMENT - SPECIFICATION |
| BIS IS 6403 : 1981(R2002) | CODE OF PRACTICE FOR DETERMINATION OF BEARING CAPACITY OF SHALLOW FOUNDATIONS |
| BIS IS 456 : 2000(R2016) | PLAIN AND REINFORCED CONCRETE CODE - OF PRACTICE |
| BIS IS 2974-1 : 1982(R1998) | CODE OF PRACTICE FOR DESIGN AND CONSTRUCTION OF MACHINE FOUNDATIONS - PART 1: FOUNDATION FOR RECIPROCATING TYPE MACHINES |
| BIS IS 2911-3 : 1980 AMD 4 2014 | CODE OF PRACTICE FOR DESIGN AND CONSTRUCTION OF PILE FOUNDATIONS - PART 3: UNDER-REAMED PILES |
| BIS IS 4968-2 : 1976(R2002) | METHOD FOR SUBSURFACE SOUNDING FOR SOILS - PART 2: DYNAMIC METHOD USING CONE AND BENTONITE SLURRY |
| BIS IS 8043 : 1991(R2005) | SPECIFICATION FOR HYDROPHOBIC PORTLAND CEMENT |
| BIS IS 1489-1 : 2015 | PORTLAND POZZOLANA CEMENT - SPECIFICATION - PART 1: FLY ASH BASED |
| BIS IS 12600 : 1989(R2009) | SPECIFICATION FOR LOW HEAT PORTLAND CEMENT |
| BIS IS 4968-3 : 1976(R2002) | METHOD FOR SUBSURFACE SOUNDING FOR SOILS - PART 3: STATIC CONE PENETRATION TEST |
| BIS IS 12269 : 2013 | ORDINARY PORTLAND CEMENT, 53 GRADE - SPECIFICATION |
| BIS IS 8112 : 2013 | ORDINARY PORTLAND CEMENT, 43 GRADE - SPECIFICATION |
| BIS IS 4968-1 : 1976(R2002) | METHOD FOR SUBSURFACE SOUNDING FOR SOILS - PART 1: DYNAMIC METHOD USING 50 MM CONE WITHOUT BETONITE SLURRY |
| BIS IS 2062 : 2011(R2016) | HOT ROLLED MEDIUM AND HIGH TENSILE STRUCTURAL STEEL - SPECIFICATION |
| BIS IS 2131 : 1981(R2002) | METHOD FOR STANDARD PENETRATION TEST FOR SOILS |
| BIS IS 455 : 2015 | PORTLAND SLAG CEMENT - SPECIFICATION |
| BIS IS 1786 : 2008 AMD 3 2017 | HIGH STRENGTH DEFORMED STEEL BARS AND WIRES FOR CONCRETE REINFORCEMENT - SPECIFICATION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.