BIS IS 3196-4 : 2001 AMD 2 2009
Current
The latest, up-to-date edition.
WELDED LOW CARBON STEEL CYLINDERS EXCEEDING 5 LITRE WATER CAPACITY FOR LOW PRESSURE LIQUEFIABLE GASES - SPECIFICATION - PART 4: CYLINDERS FOR TOXIC AND CORROSIVE GASES
12-01-2013
FOREWORD
1 SCOPE
2 REFERENCES
3 TERMINOLOGY
4 MATERIAL
5 GENERAL
6 DESIGN
7 WELDING
8 MANUFACTURE
9 VALVES PAD AND VALVES
10 FITTINGS OTHER THAN VALVES
11 HEAT TREATMENT
12 INSPECTION
13 RADIOGRAPHIC EXAMINATION
14 CHECKING OF WATER CAPACITY
15 HYDROSTATICS TEST
16 PNEUMATIC LEAKAGE TEST
17 HYDROSTATIC STRETCH AND BURSTING
18 ACCEPTANCE TEST
19 MARKING
20 COLOUR IDENTIFICATION
21 RECORD
22 PREPARATION FOR DESPATCH
ANNEX A - LIST OF REFERRED INDIAN STANDARDS
ANNEX B - REQUIREMENTS OF BUNGS
ANNEX C - TECHNICAL DATA FOR AMMONIA (ANHYDROUS) GAS
AND THE CYLINDERS
ANNEX D - TECHNICAL DATA FOR CHLORINE GAS AND THE CYLINDERS
ANNEX E - TECHNICAL DATA FOR METHYL BROMIDE GAS AND THE CYLINDERS
ANNEX F - COMMITTEE COMPOSITION
Describes welded low carbon steel cylinders intended for storage and transportation of toxic and/or corrosive low pressure liquefiable gases of nominal capacity up to and including 250 litres water capacity.
| Committee |
MED 16
|
| DevelopmentNote |
Supersedes BIS IS 7680, BIS IS 7681 & BIS IS 7682. (09/2008)
|
| DocumentType |
Standard
|
| PublisherName |
Bureau of Indian Standards
|
| Status |
Current
|
| Supersedes |
| BIS IS 1182 : 1983(R2005) | RECOMMENDED PRACTICE FOR RADIOGRAPHIC EXAMINATION OF FUSION WELDED BUTT JOINTS IN STEEL PLATES |
| BIS IS 7241 : 1981(R2002) | GLOSSARY OF TERMS USED IN GAS CYLINDER TECHNOLOGY |
| BIS IS 7202 : 1974(R2002) | SPECIFICATION FOR INSPECTION GAUGES FOR CHECKING THREADS OF GAS CYLINDER VALVES FOR USE WITH BREATHING APPARATUS |
| BIS IS 6240 : 2008 | HOT ROLLED STEEL PLATE (UP TO 6 MM) SHEET AND STRIP FOR THE MANUFACTURE OF LOW PRESSURE LIQUEFIABLE GAS CYLINDERS |
| BIS IS 9121 : 2005(R2005) | INSPECTION GAUGES FOR CHECKING TYPE 1 (SIZE 2) TAPER THREADS OF GAS CYLINDER VALVES, TAPER 1 IN 16 - SPECIFICATION |
| BIS IS 1079 : 2017 | HOT ROLLED CARBON STEEL SHEET, PLATE AND STRIP - SPECIFICATION |
| BIS IS 3658 : 1999(R2005) | CODE OF PRACTICE FOR LIQUID PENETRANT FLAW DETECTION |
| BIS IS 9687 : 1980(R2006) | SPECIFICATION FOR INSPECTION GAUGES FOR CHECKING TYPE 1 (SIZE 1) TAPER THREADS OF GAS CYLINDER VALVES, TAPER 1 IN 16 |
| BIS IS 8867 : 1978(R2002) | SATURATED VAPOUR PRESSURE AND TEST PRESSURE FOR LOW PRESSURE LIQUEFIABLE GASES CONTAINED IN GAS CYLINDERS |
| BIS IS 7283 : 1992(R2001) | HOT-ROLLED BARS FOR PRODUCTION OF BRIGHT BARS AND MACHINED PARTS FOR ENGINEERING APPLICATIONS - SPECIFICATION |
| BIS IS 4379 : 1981 AMD 3 2013 | IDENTIFICATION OF CONTENTS OF INDUSTRIAL GAS CYLINDERS |
| BIS IS 3196-3 : 2012 | WELDED LOW CARBON STEEL CYLINDERS EXCEEDING 5 LITRE WATER CAPACITY FOR LOW PRESSURE LIQUEFIABLE GASES - PART 3: METHODS OF TEST |
| BIS IS 1875 : 1992(R2014) | CARBON STEEL BILLETS, BLOOMS, SLABS AND BARS FOR FORGINGS |
| BIS IS 3703 : 2004 | RECOMMENDED PRACTICE FOR MAGNETIC PARTICLE FLAW DETECTION |
| BIS IS 4853 : 1982(R2003) | RECOMMENDED PRACTICE FOR RADIOGRAPHIC INSPECTION OF FUSION WELDED BUTT JOINTS IN STEEL PIPES |
| BIS IS 3657 : 1978(R2005) | RADIOGRAPHIC IMAGE QUALITY INDICATORS |
| BIS IS 2595 : 2008 | INDUSTRIAL RADIOGRAPHIC TESTING - CODE OF PRACTICE |
| BIS IS 3710 : 1978(R2006) | FILLING RATIOS FOR LOW PRESSURE LIQUEFIABLE GASES CONTAINED IN CYLINDERS |
| BIS IS 5903 : 2014 AMD 1 2017 | RECOMMENDATION FOR SAFETY DEVICES FOR GAS CYLINDERS |
| BIS IS 9550 : 2001(R2015) | BRIGHT STEEL BARS - SPECIFICATION |
| BIS IS 3224 : 2002 AMD 3 2014 | VALVE FITTINGS FOR COMPRESSED GAS CYLINDERS EXCLUDING LIQUEFIED PETROLEUM GAS (LPG) CYLINDERS - SPECIFICATION |
| BIS IS 817 : 1966(R2003) | CODE OF PRACTICE FOR TRAINING AND TESTING OF METAL ARC WELDERS |
| BIS IS 2825 : 1969(R2017) | CODE FOR UNFIRED PRESSURE VESSELS |
| BIS IS 2062 : 2011(R2016) | HOT ROLLED MEDIUM AND HIGH TENSILE STRUCTURAL STEEL - SPECIFICATION |
| BIS IS 9122 : 2008 | SPECIFICATION FOR INSPECTION GAUGES FOR CHECKING TYPE 2 TAPER THREADS OF GAS CYLINDER VALVES, TAPER 3 IN 25 |
| BIS IS 9639 : 1980(R2006) | CODE OF PRACTICE FOR VISUAL INSPECTION OF LOW PRESSURE WELDED STEEL GAS CYLINDERS DURING MANUFACTURE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.