BIS IS 3224 : 2002 AMD 3 2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
VALVE FITTINGS FOR COMPRESSED GAS CYLINDERS EXCLUDING LIQUEFIED PETROLEUM GAS (LPG) CYLINDERS - SPECIFICATION
21-01-2022
12-01-2013
FOREWORD
1 SCOPE
2 REFERENCES
3 TERMINOLOGY
4 CLASSIFICATION AND TYPES OF VALVES
5 MATERIAL
6 DESIGN
7 PRESSURE RELIEF DEVICES
8 SCREW THREADS ON THE VALVE STEM
AND CYLINDER NECK
9 VALVE OUTLET CONNECTIONS AND
SPINDLES
10 TESTING AND INSPECTION
11 PRODUCTION INSPECTION AND TESTING
12 CLASSIFICATION OF TESTS
13 MARKING
ANNEX A - LIST OF REFERRED INDIAN STANDARDS
ANNEX B - SAMPLING SCHEME FOR EVALUATION OF
MECHANICAL PROPERTIES OF MATERIAL
OF VALVE BODY
ANNEX C - VALVING TORQUE TEST
ANNEX D - COMMITTEE COMPOSITION
Specifies the requirements for design, materials, manufacture and testing of new valve fittings for use with refillable aluminum and steel cylinders for compressed gases (permanent and high and low pressure liquefiable and dissolve gases) other than liquefied petroleum gas (LPG) for refillable aluminium and steel cylinders.
| Committee |
MED 16
|
| DocumentType |
Standard
|
| PublisherName |
Bureau of Indian Standards
|
| Status |
Superseded
|
| SupersededBy |
| BIS IS 3196-4 : 2001 AMD 2 2009 | WELDED LOW CARBON STEEL CYLINDERS EXCEEDING 5 LITRE WATER CAPACITY FOR LOW PRESSURE LIQUEFIABLE GASES - SPECIFICATION - PART 4: CYLINDERS FOR TOXIC AND CORROSIVE GASES |
| BIS IS 7312 : 1993 AMD 3 2007 | WELDED AND SEAMLESS STEEL DISSOLVED ACETYLENE GAS CYLINDER - SPECIFICATION |
| BIS IS 16185 : 2014 | PERIODIC INSPECTION AND TESTING - WELDED CARBON STEEL GAS CYLINDERS - CODE OF PRACTICE |
| BIS IS 16017 : 2013 | TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND TESTING OF SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS |
| BIS IS 7142 : 1995(R2006) | WELDED LOW CARBON STEEL CYLINDERS FOR LOW PRESSURE LIQUEFIABLE GASES NOT EXCEEDING 5 LITRE WATER CAPACITY - SPECIFICATION |
| BIS IS 8451 : 2009 AMD 1 2013 | PERIODIC INSPECTION AND TESTING OF HIGH PRESSURE GAS CYLINDERS - CODE OF PRACTICE |
| BIS IS 15894 : 2011 AMD 1 2013 | INSPECTION GAUGES FOR CHECKING TYPE 1 (SIZES 1, 2 AND 3) TAPER THREADS OF GAS CYLINDER VALVES AND CYLINDER NECKS - TAPER 1 IN 16 ON DIAMETER - SPECIFICATION |
| BIS IS 7285-2 : 2017 | REFILLABLE SEAMLESS STEEL GAS CYLINDERS - SPECIFICATION - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA (112 KGF/MM[2]) |
| BIS IS 15935 : 2011 AMD 1 2013 | COMPOSITE CYLINDERS FOR ON-BOARD STORAGE OF COMPRESSED NATURAL GAS (CNG) AS A FUEL FOR AUTOMOTIVE VEHICLE - SPECIFICATION |
| BIS IS 3196-2 : 2006 AMD 2 2015 | WELDED LOW CARBON STEEL CYLINDERS EXCEEDING 5 LITRE WATER CAPACITY FOR LOW PRESSURE LIQUEFIABLE GASES - PART 2: CYLINDERS FOR LIQUEFIABLE NON-TOXIC GASES OTHER THAN LPG - SPECIFICATION |
| BIS IS 15975 : 2013 | GAS CYLINDERS - CONDITIONS FOR FILLING GAS CYLINDERS |
| BIS IS 4905 : 2014 | RANDOM SAMPLING AND RANDOMIZATION PROCEDURES |
| BIS IS 7202 : 1974(R2002) | SPECIFICATION FOR INSPECTION GAUGES FOR CHECKING THREADS OF GAS CYLINDER VALVES FOR USE WITH BREATHING APPARATUS |
| BIS IS 1868 : 1996(R2015) | ANODIC COATINGS ON ALUMINIUM AND ITS ALLOYS - SPECIFICATION |
| BIS IS 9121 : 2005(R2005) | INSPECTION GAUGES FOR CHECKING TYPE 1 (SIZE 2) TAPER THREADS OF GAS CYLINDER VALVES, TAPER 1 IN 16 - SPECIFICATION |
| BIS IS 6912 : 2005(R2016) | COPPER AND COPPER ALLOY FORGING STOCK AND FORGING - SPECIFICATION |
| BIS IS 2643 : 2005 | PIPE THREADS WHERE PRESSURE-TIGHT JOINTS ARE NOT MADE ON THE THREADS - DIMENSIONS, TOLERANCES AND DESIGNATION |
| BIS IS 9687 : 1980(R2006) | SPECIFICATION FOR INSPECTION GAUGES FOR CHECKING TYPE 1 (SIZE 1) TAPER THREADS OF GAS CYLINDER VALVES, TAPER 1 IN 16 |
| BIS IS 8867 : 1978(R2002) | SATURATED VAPOUR PRESSURE AND TEST PRESSURE FOR LOW PRESSURE LIQUEFIABLE GASES CONTAINED IN GAS CYLINDERS |
| BIS IS 1598 : 1977(R2015) | METHOD FOR IZOD IMPACT TEST OF METALS |
| BIS IS 8866 : 1978(R2007) | FILLING RATIOS AND CORRESPONDING DEVELOPED PRESSURE FOR HIGH PRESSURE LIQUEFIABLE GASES CONTAINED IN GAS CYLINDER |
| BIS IS 8737 : 2017 | VALVE FITTING FOR USE WITH LIQUEFIED PETROLEUM GAS (LPG) CYLINDERS FOR MORE THAN 5 LITRE WATER CAPACITY - SPECIFICATION |
| BIS IS 5903 : 2014 AMD 1 2017 | RECOMMENDATION FOR SAFETY DEVICES FOR GAS CYLINDERS |
| BIS IS 319 : 2007 | FREE CUTTING BRASS BARS, RODS AND SECTION - SPECIFICATION |
| BIS IS 8775 : 1978(R2002) | FILLING PRESSURE AND CORRESPONDING DEVELOPED PRESSURE FOR PERMANENT GASES CONTAINED IN GAS CYLINDERS |
| BIS IS 1608 : 2005 | METALLIC MATERIALS - TENSILE TESTING AT AMBIENT TEMPERATURE |
| BIS IS 12370 : 1993(R2016) | BURSTING DISCS AND BURSTING DISC DEVICES |
| BIS IS 12300 : 1988 AMD 5 2009 | VALVE FITTINGS FOR REFRIGERANT CYLINDERS - SPECIFICATION |
| BIS IS 3745 : 2006(R2006) | YOKE TYPE VALVE CONNECTION FOR SMALL MEDICAL GAS CYLINDERS - SPECIFICATION |
| BIS IS 1068 : 1993(R2015) | ELECTROPLATED COATINGS OF NICKEL PLUS CHROMIUM AND COPPER PLUS NICKEL PLUS CHROMIUM |
| IS 2305 : 1988(R2015) | METHOD FOR MERCUROUS NITRATE TEST FOR COPPER AND COPPER ALLOYS |
| BIS IS 9122 : 2008 | SPECIFICATION FOR INSPECTION GAUGES FOR CHECKING TYPE 2 TAPER THREADS OF GAS CYLINDER VALVES, TAPER 3 IN 25 |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.