• Shopping Cart
    There are no items in your cart

BIS IS 456 : 2000(R2016)

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

PLAIN AND REINFORCED CONCRETE CODE - OF PRACTICE

Superseded date

28-08-2024

Superseded by

IS 456 : 2000(R2021)

Published date

12-01-2013

Sorry this product is not available in your region.

FOREWORD
SECTION 1 - GENERAL
1 SCOPE
2 REFERENCES
3 TERMINOLOGY
4 SYMBOLS
SECTION 2 - MATERIALS, WORKMANSHIP, INSPECTION AND TESTING
5 MATERIALS
6 CONCRETE
7 WORKABILITY OF CONCRETE
8 DURABILITY OF CONCRETE
9 CONCRETE MIX PROPORTIONING
10 PRODUCTION OF CONCRETE
11 FORMWORK
12 ASSEMBLY OF REINFORCEMENT
13 TRANSPORTING, PLACING, COMPACTION AND CURING
14 CONCRETING UNDER SPECIAL CONDITIONS
15 SAMPLING AND STRENGTH OF DESIGNED CONCRETE MIX
16 ACCEPTANCE CRITERIA
17 INSPECTION AND TESTING OF STRUCTURE
SECTION 3 - GENERAL DESIGN CONSIDERATION
18 BASES FOR DESIGN
19 LOADS AND FORCES
20 STABILITY OF THE STRUCTURE
21 FIRE RESISTANCE
22 ANALYSIS
23 BEAMS
24 SOLID SLABS
25 COMPRESSION MEMBERS
26 REQUIREMENTS GOVERNING REINFORCEMENT AND DETAILING
27 EXPANSION JOINTS
SECTION 4 - SPECIAL DESIGN REQUIREMENTS FOR STRUCTURAL
            MEMBERS AND SYSTEMS
28 CONCRETE CORBELS
29 DEEP BEAMS
30 RIBBED, HOLLOW BLOCK OR VOIDED SLAB
31 FLAT SLABS
32 WALLS
33 STAIRS
34 FOOTINGS
SECTION 5 - STRUCTURAL DESIGN (LIMIT STATE METHOD)
35 SAFETY AND SERVICEABILITY REQUIREMENTS
36 CHARACTERISTIC AND DESIGN VALUES AND PARTIAL SAFETY
   FACTORS
37 ANALYSIS
38 LIMIT STATE OF COLLAPSE: FLEXURE
39 LIMIT STATE OF COLLAPSE: COMPRESSION
40 LIMIT STATE OF COLLAPSE: SHEAR
41 LIMIT STATE OF COLLAPSE: TORSION
42 LIMIT STATE OF SERVICEABILITY: DEFLECTION
43 LIMIT STATE OF SERVICEABILITY: CRACKING
ANNEX A - LIST OF REFERRED INDIAN STANDARDS
ANNEX B - STRUCTURAL DESIGN (WORKING STRESS METHOD)
ANNEX C - CALCULATION OF DEFLECTION
ANNEX D - SLABS SPANNING IN TWO DIRECTIONS
ANNEX E - EFFECTIVE LENGTH OF COLUMNS
ANNEX F - CALCULATION OF CRACKED WIDTH
ANNEX G - MOMENTS OF RESISTANCE FOR RECTANGULAR AND T-SECTIONS
ANNEX H - COMMITTEE COMPOSITION
ANNEX J - SELF COMPACTING CONCRETE

Describes the general structural use of plain and reinforced concrete.

Committee
CED 2
DocumentType
Standard
PublisherName
Bureau of Indian Standards
Status
Superseded
SupersededBy

BIS IS 2911-1-4 : 2010 DESIGN AND CONSTRUCTION OF PILE FOUNDATIONS - CODE OF PRACTICE - PART 1: CONCRETE PILES - SECTION 4: PRECAST CONCRETE PILES IN PREBORED HOLES
BIS IS 7113 : 2003(R2017) SOIL-CEMENT LINING FOR CANALS - CODE OF PRACTICE
BIS IS 8112 : 2013 ORDINARY PORTLAND CEMENT, 43 GRADE - SPECIFICATION
BIS IS 1893-2 : 2014 CRITERIA FOR EARTHQUAKE RESISTANT DESIGN OF STRUCTURES - PART 2: LIQUID RETAINING TANKS
BIS IS 1893-3 : 2014 CRITERIA FOR EARTHQUAKE RESISTANT DESIGN OF STRUCTURES - PART 3: BRIDGES AND RETAINING WALLS
BIS IS 15663-1 : 2006(R2011) DESIGN AND INSTALLATION OF NATURAL GAS PIPELINES - CODE OF PRACTICE - PART 1: LAYING OF PIPELINES
BIS IS 2911-1-3 : 2010 DESIGN AND CONSTRUCTION OF PILE FOUNDATIONS - CODE OF PRACTICE - PART 1: CONCRETE PILES - SECTION 3: DRIVEN PRECAST CONCRETE PILES
BIS IS 16144 : 2014 FOODGRAIN STORAGE GODOWNS - CODE OF PRACTICE
BIS IS 1343 : 2012 PRESTRESSED CONCRETE - CODE OF PRACTICE - SECTION 1: GENERAL
BIS IS 2911-1-1 : 2010 DESIGN AND CONSTRUCTION OF PILE FOUNDATIONS - CODE OF PRACTICE - PART 1: CONCRETE PILES - SECTION 1: DRIVEN CAST IN-SITU CONCRETE PILES
BIS IS 3370-1 : 2009 CONCRETE STRUCTURES FOR STORAGE OF LIQUIDS - CODE OF PRACTICE - PART 1: GENERAL REQUIREMENTS
BIS IS 1893-1 : 2016 CRITERIA FOR EARTHQUAKE RESISTANT DESIGN OF STRUCTURES - PART 1: GENERAL PROVISIONS AND BUILDINGS
BIS IS 3370-2 : 2009 CONCRETE STRUCTURES FOR STORAGE OF LIQUIDS - CODE OF PRACTICE - PART 2: REINFORCED CONCRETE STRUCTURES
BIS IS 2185-4 : 2008 CONCRETE MASONRY UNITS - SPECIFICATION - PART 4: PREFORMED FOAM CELLULAR CONCRETE BLOCKS
BIS IS 800 : 2007 AMD 1 2012 GENERAL CONSTRUCTION IN STEEL - CODE OF PRACTICE
BIS IS 1893-4 : 2015 CRITERIA FOR EARTHQUAKE RESISTANT DESIGN OF STRUCTURES - PART 4: INDUSTRIAL STRUCTURES INCLUDING STACK-LIKE STRUCTURES
BIS IS 4998-1 : 1992(R2012) CRITERIA FOR DESIGN OF REINFORCED CONCRETE CHIMNEYS - PART 1: ASSESSMENT OF LOADS
BIS IS 15988 : 2013 SEISMIC EVALUATION AND STRENGTHENING OF EXISTING REINFORCED CONCRETE BUILDINGS - GUIDELINES
BIS IS 2974-3 : 1992(R2005) DESIGN AND CONSTRUCTION OF MACHINE FOUNDATIONS - CODE OF PRACTICE - PART 3: FOUNDATIONS FOR ROTARY TYPE MACHINES (MEDIUM AND HIGH FREQUENCY)
BIS IS 2911-1-2 : 2010 DESIGN AND CONSTRUCTION OF PILE FOUNDATIONS - CODE OF PRACTICE - PART 1: CONCRETE PILES - SECTION 2: BORED CAST IN-SITU CONCRETE PILES
BIS IS 4326 : 2013 EARTHQUAKE RESISTANT DESIGN AND CONSTRUCTION OF BUILDINGS - CODE OF PRACTICE
BIS IS 6533-2 : 1989(R2003) CODE OF PRACTICE FOR DESIGN AND CONSTRUCTION OF STEEL CHIMNEY - PART 2: STRUCTURAL ASPECT
IS 6923 : 2023 Performance of Screed Board Concrete Vibrators - Method of Test
IS 11389 : 2023 Method For Testing Performance Of Immersion Type Concrete Vibrators

BIS IS 3025-32 : 1988(R2014) METHODS OF SAMPLING AND TEST (PHYSICAL AND CHEMICAL) FOR WATER AND WASTEWATER - PART 32: CHLORIDE
BIS IS 7861-2 : 1981(R2002) CODE OF PRACTICE FOR EXTREME WEATHER CONCRETING - PART 2: RECOMMENDED PRACTICE FOR COLD WEATHER CONCRETING
BIS IS 4326 : 2013 EARTHQUAKE RESISTANT DESIGN AND CONSTRUCTION OF BUILDINGS - CODE OF PRACTICE
BIS IS 1489-2 : 2015 PORTLAND POZZOLANA CEMENT - SPECIFICATION - PART 2: CALCINED CLAY BASED
BIS IS 516 : 1959(R2004) METHOD OF TEST FOR STRENGTH OF CONCRETE
BIS IS 6909 : 1990(R2005) SPECIFICATION FOR SUPERSULPHATED CEMENT
BIS IS 6061-2 : 1981(R2005) CODE OF PRACTICE FOR CONSTRUCTION OF FLOOR AND ROOF WITH JOISTS AND FILLER BLOCKS - PART 2: WITH HOLLOW CLAY FILLER BLOCKS
BIS IS 875-4 : 1987(R2003) CODE OF PRACTICE FOR DESIGN LOADS (OTHER THAN EARTHQUAKE) FOR BUILDINGS AND STRUCTURES - PART 4: SNOW LOADS
BIS IS 3025-24 : 1986(R2014) METHODS OF SAMPLING AND TEST (PHYSICAL AND CHEMICAL) FOR WATER AND WASTEWATER - PART 24: SULPHATES
BIS IS 9103 : 1999 AMD 2 2007 CONCRETE ADMIXTURES - SPECIFICATION
BIS IS 2505 : 1992(R2004) CONCRETE VIBRATORS - IMMERSION TYPE - GENERAL REQUIREMENTS
IS 875-1 : 1987(R2008) CODE OF PRACTICE FOR DESIGN LOADS (OTHER THAN EARTHQUAKE) FOR BUILDINGS AND STRUCTURES - PART 1: DEAD LOADS - UNIT WEIGHTS OF BUILDING MATERIALS AND STORED MATERIALS
BIS IS 12330 : 1988(R2005) SPECIFICATION FOR SULPHATE RESISTING PORTLAND CEMENT
BIS IS 9417 : 1989(R1994) RECOMMENDATIONS FOR WELDING COLD WORKED BARS FOR REINFORCED CONCRETE CONSTRUCTION
BIS IS 875-2 : 1987(R2008) CODE OF PRACTICE FOR DESIGN LOADS (OTHER THAN EARTHQUAKE) FOR BUILDINGS AND STRUCTURES - PART 2: IMPOSED LOADS
BIS IS 3025-17 : 1984(R2017) METHODS OF SAMPLING AND TEST (PHYSICAL AND CHEMICAL) FOR WATER AND WASTEWATER - PART 17: NON-FILTERABLE RESIDUE (TOTAL SUSPENDED SOLIDS)
BIS IS 6461-10 : 1973(R2002) GLOSSARY OF TERMS RELATING TO CEMENT CONCRETE - PART 10: TEST AND TESTING APPARATUS
BIS IS 2751 : 1979(R1998) CODE OF PRACTICE FOR WELDING OF MILD STEEL PLAIN AND DEFORMED BARS FOR REINFORCED CONCRETE CONSTRUCTION
BIS IS 1343 : 2012 PRESTRESSED CONCRETE - CODE OF PRACTICE - SECTION 1: GENERAL
BIS IS 4926 : 2003(R2017) READY-MIXED CONCRETE - CODE OF PRACTICE
BIS IS 1893 : 1984(R2008) CRITERIA FOR EARTHQUAKE RESISTANT DESIGN OF STRUCTURES
BIS IS 4845 : 1968(R2004) DEFINITIONS AND TERMINOLOGY RELATING TO HYDRAULIC CEMENT
BIS IS 13311-1 : 1992(R2004) NON-DESTRUCTIVE TESTING OF CONCRETE - PART 1: ULTRASONIC PULSE VELOCITY
BIS IS 7861-1 : 1975(R2002) CODE OF PRACTICE FOR EXTREME WEATHER CONCRETING - PART 1: RECOMMENDED PRACTICE FOR HOT WEATHER CONCRETING
BIS IS 15388 : 2003(R2017) SILICA FUME - SPECIFICATION
BIS IS 6461-8 : 1973(R2002) GLOSSARY OF TERMS RELATING TO CEMENT CONCRETE - PART 8: PROPERTIES OF CONCRETE
BIS IS 432-1 : 1982(R2015) SPECIFICATION FOR MILD STEEL AND MEDIUM TENSILE STEEL BARS AND HARD-DRAWN STEEL WIRE FOR CONCRETE REINFORCEMENT - PART 1: MILD STEEL AND MEDIUM TENSILE STEEL BARS
BIS IS 8041 : 1990(R2005) SPECIFICATION FOR RAPID HARDENING PORTLAND CEMENT
BIS IS 6461-4 : 1972(R2002) GLOSSARY OF TERMS RELATING TO CEMENT CONCRETE - PART 4: TYPES OF CONCRETE
BIS IS 269 : 2015 ORDINARY PORTLAND CEMENT - SPECIFICATION
BIS IS 3025-23 : 1986(R2014) METHODS OF SAMPLING AND TEST (PHYSICAL AND CHEMICAL) FOR WATER AND WASTEWATER - PART 23: ALKALINITY
BIS IS 6461-3 : 1972(R2002) GLOSSARY OF TERMS RELATING TO CEMENT CONCRETE - PART 3: CONCRETE REINFORCEMENT
BIS IS 3951-1 : 1975(R2002) SPECIFICATION FOR HOLLOW CLAY TILES FOR FLOORS AND ROOFS - PART 1: FILLER TYPE
BIS IS 4031-5 : 1988 AMD 2 2013 METHODS OF PHYSICAL TESTS FOR HYDRAULIC CEMENT - PART 5: DETERMINATION OF INITIAL AND FINAL SETTING TIMES
BIS IS 6461-5 : 1972(R2002) GLOSSARY OF TERMS RELATING TO CEMENT CONCRETE - PART 5: FORMWORK FOR CONCRETE
BIS IS 6061-1 : 1971(R2002) CODE OF PRACTICE FOR CONSTRUCTION OF FLOOR AND ROOF WITH JOISTS AND FILLER BLOCKS - PART 1: WITH HOLLOW CONCRETE FILLER BLOCKS
BIS IS 6461-12 : 1973(R2002) GLOSSARY OF TERMS RELATING TO CEMENT CONCRETE - PART 12: MISCELLANEOUS
BIS IS 1641 : 2013 FIRE SAFETY OF BUILDINGS (GENERAL): GENERAL PRINCIPLES OF FIRE GRADING AND CLASSIFICATION - CODE OF PRACTICE
BIS IS 1904 : 1986(R2005) CODE OF PRACTICE FOR DESIGN AND CONSTRUCTION OF FOUNDATIONS IN SOILS - GENERAL REQUIREMENTS
BIS IS 1566 : 1982 AMD 4 SPECIFICATION FOR HARD-DRAWN STEEL WIRE FABRIC FOR CONCRETE REINFORCEMENT
BIS IS 2502 : 1963(R2004) CODE OF PRACTICE FOR BENDING AND FIXING OF BARS FOR CONCRETE REINFORCEMENT
BIS IS 1199 : 1959(R2004) METHODS OF SAMPLING AND ANALYSIS OF CONCRETE
BIS IS 2514 : 1963(R2017) SPECIFICATION FOR CONCRETE VIBRATING TABLES
IS 2506 : 1985(R2016) General requirements for screed board concrete vibrators
IS 13920 : 2016 DUCTILE DESIGN AND DETAILING OF REINFORCED CONCRETE STRUCTURES SUBJECTED TO SEISMIC FORCES - CODE OF PRACTICE
BIS IS 1642 : 2013 FIRE SAFETY OF BUILDINGS (GENERAL): DETAILS OF CONSTRUCTION - CODE OF PRACTICE
BIS IS 4656 : 1968(R2001) SPECIFICATION FOR FORM VIBRATORS FOR CONCRETE
BIS IS 6461-1 : 1972(R2002) GLOSSARY OF TERMS RELATING TO CEMENT CONCRETE - PART 1: CONCRETE AGGREGATES
BIS IS 12119 : 1987(R2004) INFORMATION TECHNOLOGY - SOFTWARE PACKAGES - QUALITY REQUIREMENTS AND TESTING
BIS IS 875-5 : 1987(R2008) CODE OF PRACTICE FOR DESIGN LOADS (OTHER THAN EARTHQUAKE) FOR BUILDINGS AND STRUCTURES - PART 5: SPECIAL LOADS AND COMBINATIONS
BIS IS 3025-22 : 1986(R2014) METHODS OF SAMPLING AND TEST (PHYSICAL AND CHEMICAL) FOR WATER AND WASTEWATER - PART 22: ACIDITY
BIS IS 9013 : 1978(R2004) METHOD OF MAKING, CURING AND DETERMINING COMPRESSIVE STRENGTH OF ACCELERATED CURED CONCRETE TEST SPECIMENS
BIS IS 2386-3 : 1963(R2016) METHODS OF TEST FOR AGGREGATES FOR CONCRETE - PART 3: SPECIFIC GRAVITY, DENSITY, VOIDS, ABSORPTION AND BULKING
BIS IS 11817 : 1986(R2002) CLASSIFICATION OF JOINTS IN BUILDINGS FOR ACCOMMODATION OF DIMENSIONAL DEVIATIONS DURING CONSTRUCTION
BIS IS 1791 : 1985(R1999) GENERAL REQUIREMENTS FOR BATCH TYPE CONCRETE MIXERS
BIS IS 8043 : 1991(R2005) SPECIFICATION FOR HYDROPHOBIC PORTLAND CEMENT
BIS IS 6461-9 : 1973(R2002) GLOSSARY OF TERMS RELATING TO CEMENT CONCRETE - PART 9: STRUCTURAL ASPECTS
BIS IS 4925 : 2004(R2009) CONCRETE BATCHING AND MIXING PLANT - SPECIFICATION
BIS IS 383 : 2016 COARSE AND FINE AGGREGATE FOR CONCRETE - SPECIFICATION
BIS IS 1489-1 : 2015 PORTLAND POZZOLANA CEMENT - SPECIFICATION - PART 1: FLY ASH BASED
BIS IS 13311-2 : 1992(R2004) METHODS OF NON-DESTRUCTIVE TESTING OF CONCRETE - PART 2: REBOUND HAMMER
BIS IS 12600 : 1989(R2009) SPECIFICATION FOR LOW HEAT PORTLAND CEMENT
BIS IS 12089 : 1987(R2008) SPECIFICATION FOR GRANULATED SLAG FOR MANUFACTURE OF PORTLAND SLAG CEMENT
BIS IS 12269 : 2013 ORDINARY PORTLAND CEMENT, 53 GRADE - SPECIFICATION
BIS IS 6461-7 : 1973(R2002) GLOSSARY OF TERMS RELATING TO CEMENT CONCRETE - PART 7: MIXING, LAYING, COMPACTION, CURING AND OTHER CONSTRUCTION ASPECTS
BIS IS 14687 : 1999(R2005) FALSEWORK FOR CONCRETE STRUCTURES - GUIDELINES
BIS IS 8112 : 2013 ORDINARY PORTLAND CEMENT, 43 GRADE - SPECIFICATION
BIS IS 4082 : 1996(R2003) RECOMMENDATIONS ON STACKING AND STORAGE OF CONSTRUCTION MATERIALS AND COMPONENTS AT SITE
BIS IS 6461-2 : 1972(R2002) GLOSSARY OF TERMS RELATING TO CEMENT CONCRETE - PART 2: MATERIALS (OTHER THAN CEMENT AND AGGREGATE)
BIS IS 6452 : 1989(R2005) SPECIFICATION FOR HIGH ALUMINA CEMENT FOR STRUCTURAL USE
BIS IS 2062 : 2011(R2016) HOT ROLLED MEDIUM AND HIGH TENSILE STRUCTURAL STEEL - SPECIFICATION
BIS IS 6461-11 : 1973(R2002) GLOSSARY OF TERMS RELATING TO CEMENT CONCRETE - PART 11: PRESTRESSED CONCRETE
BIS IS 5816 : 1999(R2004) SPLITTING TENSILE STRENGTH OF CONCRETE METHOD OF TEST
BIS IS 3025-18 : 1984(R2017) METHODS OF SAMPLING AND TEST (PHYSICAL AND CHEMICAL) FOR WATER AND WASTEWATER - PART 18: VOLATILE AND FIXED RESIDUE (TOTAL FILTERABLE AND NON-FILTERABLE)
BIS IS 455 : 2015 PORTLAND SLAG CEMENT - SPECIFICATION
BIS IS 6461-6 : 1972(R2002) GLOSSARY OF TERMS RELATING TO CEMENT CONCRETE - PART 6: EQUIPMENT, TOOLS AND PLANT
BIS IS 3812 : 1981(R1999) SPECIFICATION FOR FLY ASH FOR USE AS POZZOLANA AND ADMIXTURE
BIS IS 1786 : 2008 AMD 3 2017 HIGH STRENGTH DEFORMED STEEL BARS AND WIRES FOR CONCRETE REINFORCEMENT - SPECIFICATION
BIS IS 3414 : 1968(R2005) CODE OF PRACTICE FOR DESIGN AND INSTALLATION OF JOINTS IN BUILDINGS

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.