BIS IS 7312 : 1993 AMD 3 2007
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
WELDED AND SEAMLESS STEEL DISSOLVED ACETYLENE GAS CYLINDER - SPECIFICATION
19-11-2019
12-01-2013
FOREWORD
1 SCOPE
2 REFERENCES
3 TERMINOLOGY
4 MATERIAL
5 GENERAL
6 DESIGN
7 WELDING
8 MANUFACTURE
9 VALVES AND VALVES PAD
10 FITTINGS OTHER THAN VALVES
11 HEAT TREATMENT
12 INSPECTION
13 RADIOGRAPHIC EXAMINATION
14 CHECKING OF WATER CAPACITY
15 HYDROSTATIC TESTS
16 PNEUMATIC LEAKAGE TEST
17 BURSTING TEST
18 ACCEPTANCE TESTS
19 TECHNICAL REQUIREMENTS FOR ACETYLENE,
POROUS FILLING MASS AND SOLVENT
20 PROCEDURE FOR TYPE TESTING OF DISSOLVED
ACETYLENE CYLINDERS
21 MARKING
22 RECORDS
ANNEX A - LIST OF REFERRED INDIAN STANDARDS
ANNEX B - DETERMINATION OF POROSITY OF THE
POROUS MASS
ANNEX C - DETERMINATION OF CRUSHING STRENGTH
OF THE POROUS MASS
Specifies the requirements for portable welded or seamless dissolved acetylene gas cylinders made of steel and having nominal water capacity within the range 0.5 litres and up to and including 130 litres.
| Committee |
MED 16
|
| DocumentType |
Standard
|
| PublisherName |
Bureau of Indian Standards
|
| Status |
Superseded
|
| SupersededBy |
| BIS IS 7285-2 : 2017 | REFILLABLE SEAMLESS STEEL GAS CYLINDERS - SPECIFICATION - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA (112 KGF/MM[2]) |
| BIS IS 1182 : 1983(R2005) | RECOMMENDED PRACTICE FOR RADIOGRAPHIC EXAMINATION OF FUSION WELDED BUTT JOINTS IN STEEL PLATES |
| BIS IS 7241 : 1981(R2002) | GLOSSARY OF TERMS USED IN GAS CYLINDER TECHNOLOGY |
| BIS IS 308 : 1988(R2005) | DISSOLVED ACETYLENE (GAS) |
| BIS IS 6240 : 2008 | HOT ROLLED STEEL PLATE (UP TO 6 MM) SHEET AND STRIP FOR THE MANUFACTURE OF LOW PRESSURE LIQUEFIABLE GAS CYLINDERS |
| BIS IS 2041 : 2009(R2013) | STEEL PLATES FOR PRESSURE VESSELS USED AT MODERATE AND LOW TEMPERATURE - SPECIFICATION |
| BIS IS 1079 : 2017 | HOT ROLLED CARBON STEEL SHEET, PLATE AND STRIP - SPECIFICATION |
| BIS IS 13479 : 1992(R2004) | ASSEMBLED JOINTS BETWEEN FITTINGS AND POLYETHYLENE (PE) PRESSURE PIPES - TEST OF RESISTANCE TO PULL OUT |
| BIS IS 7283 : 1992(R2001) | HOT-ROLLED BARS FOR PRODUCTION OF BRIGHT BARS AND MACHINED PARTS FOR ENGINEERING APPLICATIONS - SPECIFICATION |
| BIS IS 4379 : 1981 AMD 3 2013 | IDENTIFICATION OF CONTENTS OF INDUSTRIAL GAS CYLINDERS |
| BIS IS 3196-3 : 2012 | WELDED LOW CARBON STEEL CYLINDERS EXCEEDING 5 LITRE WATER CAPACITY FOR LOW PRESSURE LIQUEFIABLE GASES - PART 3: METHODS OF TEST |
| BIS IS 1875 : 1992(R2014) | CARBON STEEL BILLETS, BLOOMS, SLABS AND BARS FOR FORGINGS |
| BIS IS 4853 : 1982(R2003) | RECOMMENDED PRACTICE FOR RADIOGRAPHIC INSPECTION OF FUSION WELDED BUTT JOINTS IN STEEL PIPES |
| BIS IS 226 : 1975 | STRUCTURAL STEEL (STANDARD QUALITY) |
| BIS IS 3657 : 1978(R2005) | RADIOGRAPHIC IMAGE QUALITY INDICATORS |
| BIS IS 2595 : 2008 | INDUSTRIAL RADIOGRAPHIC TESTING - CODE OF PRACTICE |
| BIS IS 10787 : 1984(R1990) | HOT-ROLLED MICRO-ALLOYED STEEL PLATE, SHEET AND STRIP FOR MANUFACTURE OF LOW PRESSURE LIQUIFIABLE GAS CYLINDERS |
| BIS IS 9550 : 2001(R2015) | BRIGHT STEEL BARS - SPECIFICATION |
| BIS IS 3224 : 2002 AMD 3 2014 | VALVE FITTINGS FOR COMPRESSED GAS CYLINDERS EXCLUDING LIQUEFIED PETROLEUM GAS (LPG) CYLINDERS - SPECIFICATION |
| BIS IS 817 : 1966(R2003) | CODE OF PRACTICE FOR TRAINING AND TESTING OF METAL ARC WELDERS |
| BIS IS 170 : 2004(R2011) | |
| BIS IS 2825 : 1969(R2017) | CODE FOR UNFIRED PRESSURE VESSELS |
| BIS IS 2062 : 2011(R2016) | HOT ROLLED MEDIUM AND HIGH TENSILE STRUCTURAL STEEL - SPECIFICATION |
| BIS IS 7285 : 1988(R2002) | SPECIFICATION FOR SEAMLESS STEEL CYLINDERS FOR PERMANENT AND HIGH PRESSURE LIQUEFIABLE GASES |
| BIS IS 9639 : 1980(R2006) | CODE OF PRACTICE FOR VISUAL INSPECTION OF LOW PRESSURE WELDED STEEL GAS CYLINDERS DURING MANUFACTURE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.