BIS IS 9595 : 1996(R2003)
Current
The latest, up-to-date edition.
METAL-ARC WELDING OF CARBON AND CARBON MANGANESE STEELS - RECOMMENDATIONS
12-01-2013
FOREWORD
1 SCOPE
2 REFERENCES
3 TERMINOLOGY
4 INFORMATION TO BE SUPPLIED
5 PARENT METAL
6 DISSIMILAR STEELS
7 WELDING CONSUMABLES
8 EQUIPMENT
9 BUTT-WELD DETAILS
10 PARTIAL PENETRATION BUTT-WELDS
11 FILLET WELD DETAILS
12 WELDS IN SLOTS
13 PREPARATION OF JOINT FACES
14 FUSION FACES
15 ASSEMBLY FOR WELDING
16 ALIGNMENT OF BUTT JOINTS
17 FIT-UP OF PARTS JOINED BY FILLET WELDS
18 TACK WELDS
19 TEMPORARY ATTACHMENTS
20 PROTECTION FROM THE WEATHER
21 STRAY ARCING ON WORK
22 INTER-RUN CLEANING
23 DETAILS OF WELDING PROCEDURE
24 WELDING PROCEDURES TO AVOID CRACKING
25 APPROVAL AND TESTING OF WELDING PROCEDURES
26 APPROVAL AND TESTING OF WELDERS
27 IDENTIFICATION
28 PEENING
29 REMOVAL OF TEMPORARY ATTACHMENTS
30 SUPERVISION
31 INSPECTION AND TESTING
32 QUALITY OF WELDS AND CORRECTIONS
33 POST WELD HEAT TREATMENT
34 CLEANING AND PROTECTIVE COATING
ANNEX A - NOTES ON DESIGN
ANNEX B - NOTES ON BUT WELDS (FOR OTHER THAN
STRUCTURAL HOLLOW SECTIONS)
ANNEX C - TYPICAL DETAILS FOR BUT WELDS FOR
STRUCTURAL HOLLOW SECTIONS
ANNEX D - TYPICAL DETAILS FOR BRANCH CONNECTIONS
FOR STRUCTURAL HOLLOW SECTIONS
ANNEX E - PROCEDURE SPECIFICATION SHEET FOR METAL
ARC WELDING
ANNEX F - AVOIDANCE OF HYDROGEN CRACKING
ANNEX G - GUIDANCE ON SOLIDIFICATION CRACKING
ANNEX H - LAMELLAR TEARING
Describes general requirements for the manual, semi-automatic and automatic metal arc welding of carbon and carbon manganese steel in all product forms.
| Committee |
MTD 12
|
| DevelopmentNote |
Supersedes BIS IS 6227. (09/2008)
|
| DocumentType |
Standard
|
| PublisherName |
Bureau of Indian Standards
|
| Status |
Current
|
| Supersedes |
| BIS IS 14106 : 1996(R2017) | DIRECT ACTION HANDPUMPS - SPECIFICATION |
| BIS IS 4880-7 : 2014 | CODE OF PRACTICE FOR DESIGN OF TUNNELS CONVEYING WATER - PART 7: STRUCTURAL DESIGN OF STEEL LINING |
| BIS IS 800 : 2007 AMD 1 2012 | GENERAL CONSTRUCTION IN STEEL - CODE OF PRACTICE |
| BIS IS 3177 : 1999(R2004) | CODE OF PRACTICE FOR ELECTRIC OVERHEAD TRAVELLING CRANES AND GANTRY CRANES OTHER THAN STEEL WORK CRANES |
| BIS IS 7307-1 : 1974(R2003) | APPROVAL TESTS FOR WELDING PROCEDURES - PART 1: FUSION WELDING FOR STEEL |
| BIS IS 816 : 1969(R1998) | CODE OF PRACTICE FOR USE OF METAL ARC WELDING FOR GENERAL CONSTRUCTION IN MILD STEEL |
| BIS IS 7310-1 : 1974(R2006) | APPROVAL TESTS FOR WELDERS WORKING TO APPROVED WELDING PROCEDURES - PART 1: FUSION WELDING OF STEEL |
| BIS IS 13851 : 1993(R2006) | STORAGE AND REDRYING OF COVERED ELECTRODES BEFORE USE - RECOMMENDATIONS |
| BIS IS 4353 : 1995(R2006) | SUBMERGED ARC WELDING OF MILD STEEL AND LOW ALLOY STEELS - RECOMMENDATIONS |
| BIS IS 1024 : 1999(R2005) | CODE OF PRACTICE FOR USE OF WELDING IN BRIDGES AND STRUCTURES SUBJECT TO DYNAMIC LOADING |
| BIS IS 5760 : 1998 AMD 1 2008 | ARGON, COMPRESSED AND LIQUID - SPECIFICATION |
| BIS IS 822 : 1970(R2003) | CODE OF PROCEDURE FOR INSPECTION OF WELDS |
| BIS IS 814 : 2004(R2010) | COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF CARBON AND CARBON MANGANESE STEEL - SPECIFICATION |
| BIS IS 3613 : 1974(R2006) | ACCEPTANCE TESTS FOR WIRE FLUX COMBINATION FOR SUBMERGED ARC WELDING |
| BIS IS 813 : 1986(R2003) | SCHEME OF SYMBOLS FOR WELDING |
| BIS IS 812 : 1957(R2003) | GLOSSARY OF TERMS RELATING TO WELDING AND CUTTING OF METALS |
| BIS IS 307 : 1966(R2017) | CARBON DIOXIDE |
| BIS IS 6419 : 1996 AMD 1 2008 | WELDING RODS AND BARE ELECTRODES FOR GAS SHIELDED ARC WELDING OF STRUCTURAL STEELS - SPECIFICATION |
| BIS IS 10178 : 1995(R2006) | CO[2] GAS SHIELDED METAL ARC WELDING OF STRUCTURAL STEELS - RECOMMENDATIONS |
| BIS IS 7318-1 : 1974(R2003) | APPROVAL TEST FOR WELDERS WHEN WELDING PROCEDURE APPROVAL IS NOT REQUIRED - PART 1: FUSION WELDING OF STEEL |
| BIS IS 8500 : 1991(R2000) | STRUCTURAL STEEL - MICROALLOYED (MEDIUM AND HIGH STRENGTH QUALITIES) - SPECIFICATION |
| BIS IS 7280 : 1974(R2008) | SPECIFICATION FOR BARE WIRE ELECTRODES FOR SUBMERGED ARC WELDING OF STRUCTURAL STEELS |
| BIS IS 2062 : 2011(R2016) | HOT ROLLED MEDIUM AND HIGH TENSILE STRUCTURAL STEEL - SPECIFICATION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.