BIS IS/ISO 3183 : 2007

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS

Available format(s):

Superseded date: 09-03-2020

Language(s):

Published date: 12-01-2013

Publisher: Bureau of Indian Standards

Table of Contents - (Show below) - (Hide below)

National Foreword
Introduction
1 Scope
2 Conformity
3 Normative references
4 Terms and definitions
5 Symbols and abbreviated terms
6 Pipe grade, steel name and delivery condition
7 Information to be supplied by the purchaser
8 Manufacturing
9 Acceptance criteria
10 Inspection
11 Marking
12 Coatings and thread protectors
13 Retention of records
14 Pipe loading
Annex A (normative) - Specification for welded jointers
Annex B (normative) - Manufacturing procedure
        qualification for PSL 2 pipe
Annex C (normative) - Treatment of surface imperfections
        and defects
Annex D (normative) - Repair welding procedure
Annex E (normative) - Non-destructive inspection for
        other than sour service or offshore service
Annex F (normative) - Requirements for couplings
        (PSL 1 only)
Annex G (normative) - PSL 2 pipe with resistance to
        ductile fracture propagation
Annex H (normative) - PSL 2 pipe ordered for sour service
Annex I (normative) - Pipe ordered as "Through the
        Flowline" (TFL) pipe
Annex J (normative) - PSL 2 pipe ordered for offshore
        service
Annex K (normative) - Non-destructive inspection for pipe
        ordered for sour service and/or offshore service
Annex L (informative) - Steel designations
Annex M (informative) - Correspondence of terminology
        between ISO 3183 and its source documents
Bibliography
NATIONAL ANNEX A - BIS CERTIFICATION MARKING

Abstract - (Show below) - (Hide below)

Describes requirements for the manufacture of two product specification levels (PSL 1 and PSL 2) of seamless and welded steel pipes for use in pipeline transportation systems in the petroleum and natural gas industries.

General Product Information - (Show below) - (Hide below)

Committee	MTD 19
Development Note	Supersedes BIS IS 1978 & BIS IS 1979. (07/2010)
Document Type	Standard
ISBN
Pages
Published
Publisher	Bureau of Indian Standards
Status	Superseded
Superseded By	IS/ISO 3183 : 2012
Supersedes	BIS IS 1979 : 1985(R2002) BIS IS 1978 : 1982

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
ISO 3183:2012	Identical

Standards Referencing This Book - (Show below) - (Hide below)

ISO 404:2013	Steel and steel products — General technical delivery requirements
BIS IS 2328 : 2005	METALLIC MATERIALS - TUBE - FLATTENING TEST
BIS IS 1586 : 2000(R2006)	METHOD FOR ROCKWELL HARDNESS TEST FOR METALLIC MATERIAL (SCALES A-B-C-D-E-F-G-H-K 15N, 30N, 45N, 15T, 30T AND 45T)
ISO 6929:2013	Steel products — Vocabulary
ISO 8501-1:2007	Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
ASNT SNT TC 1A : 2016	TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL
ISO/TS 29001:2010	Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations
ISO 3183-3:1999	Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 3: Pipes of requirement class C
ASTM A 435/A435M : 2017 : REDLINE	Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
ASTM E 309 : 2016 : REDLINE	Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation
EN 10027-2:2015	DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
ISO/TR 9769:1991	Steel and iron Review of available methods of analysis
ASME PV CODE 9 : 2017	BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS
API 5CT : 2012	CASING AND TUBING
ISO 8491:1998	Metallic materials Tube (in full section) Bend test
API 5L3 : 2014	DROP-WEIGHT TEAR TESTS ON LINE PIPE
NACE TM 02 84 : 2016	EVALUATION OF PIPELINE AND PRESSURE VESSEL STEELS FOR RESISTANCE TO HYDROGEN-INDUCED CRACKING
BIS IS 1757 : 1988(R2009)	METHOD FOR CHARPY IMPACT TEST (V-NOTCH) FOR METALLIC MATERIAL
ISO 12094:1994	Welded steel tubes for pressure purposes Ultrasonic testing for the detection of laminar imperfections in strips/plates used in the manufacture of welded tubes
ISO 4885:2017	Ferrous materials Heat treatments Vocabulary
ASTM E 273 : 2015 : REDLINE	Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing
ISO 6892:1998	Metallic materials Tensile testing at ambient temperature
ASTM E 114 : 2015 : REDLINE	Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing
NACE TM 01 77 : 2016	LABORATORY TESTING OF METALS FOR RESISTANCE TO SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING IN H[2]S ENVIRONMENTS
ISO 9303:1989	Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Full peripheral ultrasonic testing for the detection of longitudinal imperfections
ISO 9304:1989	Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes Eddy current testing for the detection of imperfections
ISO 9606-1:2012	Qualification testing of welders — Fusion welding — Part 1: Steels
BIS IS 1500 : 2005	METHOD FOR BRINELL HARDNESS TEST FOR METALLIC MATERIALS
ISO 3183-2:1996	Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 2: Pipes of requirements class B
ISO 11496:1993	Seamless and welded steel tubes for pressure purposes Ultrasonic testing of tube ends for the detection of laminar imperfections
BIS IS 3803-1 : 1989(R2010)	STEEL - CONVERSION OF ELONGATION VALUES - PART 1: CARBON AND LOW ALLOY STEELS
API 5L : 2012	LINE PIPE
BIS IS 1501 : 2002	METHOD FOR VICKERS HARDNESS TEST FOR METALLIC MATERIALS
ASTM E 110 : 2014 : REDLINE	Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers
BIS IS 2329 : 1985(R2001)	METHOD FOR BEND TEST ON METALLIC TUBES (IN FULL SECTION)
ISO 148-1:2016	Metallic materials — Charpy pendulum impact test — Part 1: Test method
ISO 9598:1989	Seamless steel tubes for pressure purposes Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections
ISO 31-0:1992	Quantities and units Part 0: General principles
ISO 15614-1:2017	Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
ISO 7438:2016	Metallic materials Bend test
ISO 15156-2:2015	Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
ISO 9402:1989	Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections
ISO 13664:1997	Seamless and welded steel tubes for pressure purposes Magnetic particle inspection of the tube ends for the detection of laminar imperfections
ISO 7539-2:1989	Corrosion of metals and alloys Stress corrosion testing Part 2: Preparation and use of bent-beam specimens
ISO 13678:2010	Petroleum and natural gas industries Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements
BIS IS 1890-0 : 1995(R2005)	QUANTITIES AND UNITS - PART 0: GENERAL PRINCIPLES
ISO 10543:1993	Seamless and hot-stretch-reduced welded steel tubes for pressure purposes Full peripheral ultrasonic thickness testing
BIS IS 1599 : 2012(R2017)	METALLIC MATERIALS - BEND TEST
ISO 4200:1991	Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length
ISO 6761:1981	Steel tubes Preparation of ends of tubes and fittings for welding
ASME B36.10M : 2015	WELDED AND SEAMLESS WROUGHT STEEL PIPE
ISO 2566-1:1984	Steel Conversion of elongation values Part 1: Carbon and low alloy steels
ISO 11699-1:2008	Non-destructive testing — Industrial radiographic film — Part 1: Classification of film systems for industrial radiography
ISO 10474:2013	Steel and steel products — Inspection documents
API 5A3 : 2011	RECOMMENDED PRACTICE ON THREAD COMPOUNDS FOR CASING, TUBING, LINE PIPE, AND DRILL STEM ELEMENTS
EN 10204:2004	Metallic products - Types of inspection documents
BIS IS 1608 : 2005	METALLIC MATERIALS - TENSILE TESTING AT AMBIENT TEMPERATURE
ISO 13665:1997	Seamless and welded steel tubes for pressure purposes Magnetic particle inspection of the tube body for the detection of surface imperfections
ISO 12135:2016	Metallic materials Unified method of test for the determination of quasistatic fracture toughness
ISO 11484:2009	Steel products — Employer's qualification system for non-destructive testing (NDT) personnel
ISO 19232-1:2013	Non-destructive testing — Image quality of radiographs — Part 1: Determination of the image quality value using wire-type image quality indicators
ISO 8492:2013	Metallic materials Tube Flattening test
ISO 3183-1:1996	Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 1: Pipes of requirement class A
ISO 9764:1989	Electric resistance and induction welded steel tubes for pressure purposes Ultrasonic testing of the weld seam for the detection of longitudinal imperfections
ASTM E 8 : 2004	Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 709 : 2015 : REDLINE	Standard Guide for Magnetic Particle Testing
BIS IS 3711 : 2012	STEEL AND STEEL PRODUCTS - LOCATION AND PREPARATION OF SAMPLES AND TEST PIECES FOR MECHANICAL TESTING
ISO 377:2017	Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
ISO 9765:1990	Submerged arc-welded steel tubes for pressure purposes Ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections
ISO 14284:1996	Steel and iron — Sampling and preparation of samples for the determination of chemical composition
ISO 12096:1996	Submerged arc-welded steel tubes for pressure purposes Radiographic testing of the weld seam for the detection of imperfections
ISO 10124:1994	Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes Ultrasonic testing for the detection of laminar imperfections
ISO 13663:1995	Welded steel tubes for pressure purposes Ultrasonic testing of the area adjacent to the weld seam for the detection of laminar imperfections
ISO 11960:2014	Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells
BIS IS 8910 : 2010	GENERAL TECHNICAL DELIVERY REQUIREMENTS FOR STEEL AND STEEL PRODUCTS
ISO 12095:1994	Seamless and welded steel tubes for pressure purposes Liquid penetrant testing
ASTM E 92 : 2017 : REDLINE	Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
EN 287-1:2011	Qualification test of welders - Fusion welding - Part 1: Steels
ISO 9305:1989	Seamless steel tubes for pressure purposes Full peripheral ultrasonic testing for the detection of transverse imperfections

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart