• BS 1363-2(1995) : 1995

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 2: SPECIFICATION FOR 13 A SWITCHED AND UNSWITCHED SOCKET-OUTLETS

    Available format(s):  Hardcopy, PDF

    Superseded date:  17-08-2020

    Language(s):  English

    Published date:  01-01-1995

    Publisher:  British Standards Institution

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Committees responsible
    Foreword
    1 Scope
    2 Conditions of use
    3 Terms and definitions
    4 General
    5 General conditions for type testing
    6 Classification
    7 Marking and labelling
    8 Clearances, creepage distances and solid insulation
    9 Accessibility of live parts
    10 Provision for earthing
    11 Terminals and terminations
    12 (Not used)
    13 Construction of socket-outlets
    14 Resistance to ageing and to humidity
    15 Insulation resistance and electric strength
    16 Temperature rise
    17 Breaking capacity of socket-outlets
    18 Normal operation of socket-outlets
    19 Connection of flexible cords and cord anchorage
    20 Mechanical strength
    21 Screws, current-carrying parts and connections
    22 Resistance to heat
    23 Resistance to abnormal heat and fire
    24 Resistance to excessive residual stresses and to
       rusting
    25 (Not used)
    Annex A (normative) - The construction and calibration
             of a calibrated link
    Annex B (normative) - Measurement of clearances and
             creepage distances
    Annex C (normative) - Determination of the Comparative
             Tracking index (CTI) and Proof Tracking Index (PTI)
    Annex D (normative) - Relation between rated impulse
             withstand voltage, rated voltage and Overvoltage
             Category
    Annex E (normative) - Pollution degree
    Annex F (normative) - Impulse voltage test
    Annex G (normative) - Test plug for temperature-rise test
    Annex H (informative) - Specific structure of BS EN 50525
            and its derivation from British Standards and
            from HD 21 and HD 22
    List of references

    Abstract - (Show below) - (Hide below)

    Defines requirement for 13 A switched and unswitched shuttered socket-outlets for household, commercial and light industrial purposes, with particular reference to safety in normal use.

    General Product Information - (Show below) - (Hide below)

    Committee PEL/23
    Development Note Together with BS 1363-1(1995), it supersedes BS 1363(1984) Supersedes 02/203987 DC, 91/20733 DC and 96/208500 DC (10/2003) Supersedes 06/30156712 DC. (01/2008) 1995 version along with its amendments remain current & will be withdrawn on 31/05/2015. 1995 Edition Re-Issued in May 2012 & incorporates AMD 4 2012. Supersedes 11/30203494 DC. (05/2012)
    Document Type Standard
    Publisher British Standards Institution
    Status Superseded
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    BS 1363-5:2008 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 5: SPECIFICATION FOR FUSED CONVERSION PLUGS
    BS 6173:2009 SPECIFICATION FOR INSTALLATION AND MAINTENANCE OF GAS-FIRED CATERING APPLIANCES FOR USE IN ALL TYPES OF CATERING ESTABLISHMENTS (2ND AND 3RD FAMILY GASES)
    BS 7671(2008) : 2018 REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS
    EN 62606:2013/A1:2017 GENERAL REQUIREMENTS FOR ARC FAULT DETECTION DEVICES (IEC 62606:2013/A1:2017)
    HD 60364-5-559:2012/A11:2017 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-559: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - LUMINAIRES AND LIGHTING INSTALLATIONS
    04/30089457 DC : DRAFT APR 2004 BS 5656-2 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF ESCALATORS AND PASSENGER CONVEYORS - SELECTION, INSTALLATION AND LOCATION OF NEW ESCALATORS AND MOVING WALKS
    BS 5656-2:2004 ESCALATOR AND MOVING WALKS - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF ESCALATORS AND MOVING WALKS - PART 2: CODE OF PRACTICE FOR THE SELECTION, INSTALLATION AND LOCATION OF NEW ESCALATORS AND MOVING WALKS
    BS 1363-4(1995) : 1995 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 4: SPECIFICATION FOR 13 A FUSED CONNECTION UNITS SWITCHED AND UNSWITCHED
    BS 5546:2000 SPECIFICATION FOR INSTALLATION OF HOT WATER SUPPLIES FOR DOMESTIC PURPOSES, USING GAS-FIRED APPLIANCES OF RATED INPUT NOT EXCEEDING 70 KW
    BS 1363-3(1995) : 1995 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 3: SPECIFICATION FOR ADAPTORS
    BS 6896:2005 SPECIFICATION FOR INSTALLATION OF GAS-FIRED OVERHEAD RADIANT HEATERS FOR INDUSTRIAL AND COMMERCIAL HEATING (2ND AND 3RD FAMILY GASES)
    15/30297238 DC : 0 BS 1363-4 - 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 4: SPECIFICATION FOR 13 A FUSED CONNECTION UNITS SWITCHED AND UNSWITCHED
    14/30270861 DC : 0 BS 4163 - HEALTH AND SAFETY FOR DESIGN AND TECHNOLOGY IN EDUCATIONAL AND SIMILAR ESTABLISHMENTS - CODE OF PRACTICE
    BS DD222(1996) : 1996 SPECIFICATION FOR RACK AND PINION LIFTS
    CEI EN 62606 : 2014 GENERAL REQUIREMENTS FOR ARC FAULT DETECTION DEVICES
    CSA C22.2 No. 60950-1 :2007 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 60950-1 : 2007 : INC : AMD 1 : 2011 : R2012 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R201200 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 60950-1 : 2007 : R2012 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 60950-1 : 2007 : INC : UPD 1 : 2011 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R2016 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
    15/30297232 DC : 0 BS 1363-1 - 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 1: SPECIFICATION FOR REWIRABLE AND NON-REWIRABLE 13 A FUSED PLUGS
    I.S. EN 61009-1:2012 RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBOS) - PART 1: GENERAL RULES
    I.S. HD 60364-5-559:2012 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-559: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - LUMINAIRES AND LIGHTING INSTALLATIONS (IEC 60364-5-55:2011 (MOD))
    BS 1363-1(1995) : 1995 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 1: SPECIFICATION FOR REWIRABLE AND NON-REWIRABLE 13 A FUSED PLUGS
    S.R. HD 60364-5-559:2012 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-559: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - LUMINAIRES AND LIGHTING INSTALLATIONS
    BS 6396(2008) : 2008 ELECTRICAL SYSTEMS IN OFFICE FURNITURE AND EDUCATIONAL FURNITURE - SPECIFICATION
    BS 6396:2008+A1:2015 Electrical systems in office furniture and educational furniture. Specification
    BS 6396:2002 (published 2002-09) Electrical systems in office furniture and office screens. Specification
    BS 5655-6:2002 LIFTS AND SERVICE LIFTS - CODE OF PRACTICE FOR THE SELECTION AND INSTALLATION OF NEW LIFTS
    BS 5655-6:2011 LIFTS AND SERVICE LIFTS - PART 6: CODE OF PRACTICE FOR THE SELECTION, INSTALLATION AND LOCATION OF NEW LIFTS
    I.S. EN 62606:2013 GENERAL REQUIREMENTS FOR ARC FAULT DETECTION DEVICES
    15/30297240 DC : 0 BS 1363-5 - 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 5: SPECIFICATION FOR FUSED CONVERSION PLUGS
    11/30229088 DC : 0 BS 5655-6 - LIFTS AND SERVICE LIFTS - PART 6: CODE OF PRACTICE FOR THE SELECTION AND INSTALLATION OF NEW LIFTS
    08/30177004 DC : DRAFT JULY 2008 BS 6396 - ELECTRICAL SYSTEMS IN OFFICE FURNITURE AND OFFICE SCREENS - SPECIFICATION
    IEC 60364-5-55:2011+AMD1:2012+AMD2:2016 CSV Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment - Other equipment
    BS EN 62606:2013 General requirements for arc fault detection devices
    IEC 61009-1:2010+AMD1:2012+AMD2:2013 CSV Residual current operated circuit-breakers with integral overcurrentprotection for household and similar uses (RCBOs) - Part 1: General rules
    BS 7671(2008) : 2008 REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS
    BS 4163:2007 HEALTH AND SAFETY FOR DESIGN AND TECHNOLOGY IN SCHOOLS AND SIMILAR ESTABLISHMENTS - CODE OF PRACTICE
    BS 4163:2014 Health and safety for design and technology in educational and similar establishments. Code of practice

    Standards Referencing This Book - (Show below) - (Hide below)

    BS EN 60664-1:2007 Insulation coordination for equipment within low-voltage systems Principles, requirements and tests
    BS 1210:1963 SPECIFICATION FOR WOOD SCREWS
    BS EN 61140 : 2002 PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT
    BS EN 60695-10-2:2014 Fire hazard testing Abnormal heat. Ball pressure test method
    BS 6004:2000 ELECTRIC CABLES - PVC INSULATED, NON-ARMOURED CABLES FOR VOLTAGES UP TO AND INCLUDING 450/750 V, FOR ELECTRIC POWER, LIGHTING AND INTERNAL WIRING
    BS 5901:1980 METHOD OF TEST FOR DETERMINING THE COMPARATIVE AND THE PROOF TRACKING INDICES OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS
    BS 4662:1970 SPECIFICATION FOR BOXES FOR THE ENCLOSURE OF ELECTRICAL ACCESSORIES
    BS EN 61032:1998 Protection of persons and equipment by enclosures. Probes for verification
    BS EN 60112 : 2003 METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS
    BS 1363-1(1995) : 1995 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 1: SPECIFICATION FOR REWIRABLE AND NON-REWIRABLE 13 A FUSED PLUGS
    BS EN 50075:1991 Specification for flat non-wirable two-pole plugs 2.5 A 250 V, with cord, for the connection of class II-equipment for household and similar purposes
    BS 1363-4(1995) : 1995 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 4: SPECIFICATION FOR 13 A FUSED CONNECTION UNITS SWITCHED AND UNSWITCHED
    BS EN 61180-1:1995 High-voltage test techniques for low-voltage equipment Definitions, test and procedure requirements
    BS EN 60695-2-11:2014 Fire hazard testing Glowing/hot-wire based test methods. Glow-wire flammability test method for end-products (GWEPT)
    BS 1362:1973 SPECIFICATION FOR GENERAL PURPOSE FUSE LINKS FOR DOMESTIC AND SIMILAR PURPOSES (PRIMARILY FOR USE IN PLUGS)
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective