BS 1521:1972
Current
The latest, up-to-date edition.
Specification for waterproof building papers
Hardcopy , PDF
English
19-05-1972
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Specification
1. Scope
2. General
3. Class A papers for building purposes
4. Class B papers for temporary purposes
5. Selection of rolls for sampling
6. Selection of test specimens from roll samples
7. Marking
Appendices
A. Tensile strength (wet)
B. Bursting strength (wet)
C. Resistance to water penetration
Tables
1. Tensile strength (dry)
2. Tensile strength (wet)
Quality, workmanship, dimensions, performance. Class A for prevention of draughts or ingress of water into wall or pitched roof structures, Class B for temporary purposes such as protection of concrete during curing.
| Committee |
B/546
|
| DevelopmentNote |
Earlier was withdrawn in error by the publisher, now has been re-instated. (05/2014)
|
| DocumentType |
Standard
|
| Pages |
10
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
This British Standard specifies the quality, workmanship, dimensions and performance requirements for two classes of waterproof building papers. Each class is divided into two grades and each grade into two types as follows: Class A. For building purposes, such as for the prevention of draughts or the ingress of water into wall or pitched roof structures but not for damp-proof courses such as are normally required by building byelaws. Class A papers are of two grades. They are: Grade A1, having higher tensile strength and bursting strength test requirements. Grade A2, having lower tensile strength and bursting strength test requirements. Class B. For temporary purposes, such as for the protection of concrete during curing or as an underlay to concrete to prevent moisture being absorbed by the base. Class B papers are of two grades. They are: Grade B1, having a higher bursting strength test requirement. Grade B2, having a lower bursting strength test requirement. All grades are sub-divided into the following types: Types which are not reinforced with fibres Types which have fibrous reinforcements A1 A1F A2 A2F B1 B1F B2 B2F NOTE The titles of the British Standards referred to in this standard are listed on the inside back cover.
| BS 4841-6:2006 | Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications Specification for laminated boards with auto-adhesively or separately bonded facings for use as thermal insulation for floors |
| BS 8204-4(2004) : 2004 | SCREEDS, BASES AND IN SITU FLOORINGS - PART 4: CEMENTITIOUS TERRAZZO WEARING SURFACES - CODE OF PRACTICE |
| BS 5385-5:2009 | Wall and floor tiling Design and installation of terrazzo, natural stone and agglomerated stone tile and slab flooring. Code of practice |
| BS 5385-5:1994 | Wall and floor tiling Code of practice for the design and installation of terrazzo tile and slab, natural stone and composition block floorings |
| BS 4046:1991 | Specification for compressed straw building slabs |
| 07/30043554 DC : 0 | BS 5385-5 - WALL AND FLOOR TILING - PART 5: DESIGN AND INSTALLATION OF TERRAZZO, NATURAL STONE AND AGGLOMERATED STONE TILES AND SLABS - CODE OF PRACTICE |
| 04/30055999 DC : DRAFT APR 2004 | BS 8204-4 - SCREEDS, BASES AND IN SITU FLOORINGS - PART 4: CEMENTITIOUS TERRAZZO WEARING SURFACES - CODE OF PRACTICE |
| BS 5385-3:1989 | Wall and floor tiling Code of practice for the design and installation of ceramic floor tiles and mosaics |
| 05/30125016 DC : DRAFT JUL 2005 | BS 4841-6 - RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) PRODUCTS FOR BUILDING END-USE APPLICATIONS - PART 6: SPECIFICATION FOR LAMINATED INSULATION BOARDS FOR FLOORS |
| BS 8204-4:1993 | Screeds, bases and in-situ floorings Code of practice for terrazzo wearing surfaces |
| BS 3137:1972 | Methods for determining the bursting strength of paper and board |
| BS 2924:1968 | Methods for the determination of chloride and sulphate contents of aqueous extracts of paper and board |
| BS 3177:1959 | Method for determining the permeability to water vapour of flexible sheet materials used for packaging |
| BS 4011:1966 | Recommendations for the co-ordination of dimensions in building. Co-ordinating sizes for building components and assemblies |
| BS PD6444-1(1969) : LATEST | RECOMMENDATIONS FOR THE COORDINATION OF DIMENSIONS IN BUILDING |
| BS PD6445(1969) : LATEST | RECOMMENDATIONS FOR THE COORDINATION OF DIMENSIONS IN BUILDING: TOLERANCES AND JOINTS. THE DERIVATION OF BUILDING COMPONENT MANUFACTURING SIZES FROM COORDINATING SIZES |
| BS 4330:1968 | Recommendations for the co-ordination of dimensions in building. Controlling dimensions |
| BS 743:1970 | Specification for materials for damp-proof courses |
| BS 4016:1972 | Specification for building papers (breather type) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.