BS 4576-1:1970
|
Unplasticized polyvinyl chloride (PVC-U) rainwater goods and accessories Half-round gutters and circular pipe |
BS 2G 198-3:1985
|
Sleeves for aircraft electric cables and equipment wires Specification for heat-shrinkable sleeving for binding and insulation |
BS 7008-1:1988
|
Acquisition and presentation of comparable data for basic properties of plastics. Method for single-point data |
BS 2G 198-4:1990
|
Sleeves for aircraft electric cables and equipment wires Specification for semi-rigid high performance heat shrinkable sleeving for binding and insulation |
BS 3905:1984
|
Specification for 3.8/6.6 kV, 300 A bolted flameproof cable couplers and adaptors, primarily for use in mines |
BS 3757:1978
|
Specification for rigid PVC sheet |
BS 7291-2:1990
|
Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings Specification for polybutylene (PB) pipes and associated fittings |
BS 7495:1991
|
Specification for safety requirements for children\'s table-mounted chairs for domestic use |
BS 7412:1991
|
Specification for plastics windows made from PVC-U extruded hollow profiles |
BS 6572:1985
|
Specification for blue polyethylene pipes up to nominal size 63 for below ground use for potable water |
BS 7541:1992
|
Specification for temporary protectives for the protection of metal surfaces against corrosion during transport and storage |
BS 6250-3:1983
|
Domestic and contract furniture Specification for performance requirements for cabinet furniture |
EN 10245-1:2011
|
Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
DEFSTAN 81-147/1(2017) : 2017
|
WATER-VAPOUR RESISTANT MATERIAL AND BAGS FOR PACKAGING |
BS 7722:2002
|
Surface covered PVC-U profiles for windows and doors. Specification |
DEFSTAN 59-97/3(1990) : AMD 1
|
HEAT SHRINKABLE INSULATION MATERIALS - GENERAL REQUIREMENTS, TESTS AND TEST METHODS FOR CAPABILITY APPROVAL |
DEFSTAN 81-101/2(2008) : 2008
|
REUSABLE WATER VAPOUR RESISTANT BAGS FOR ENGINE CHANGE UNITS, PROPULSION UNITS AND ASSOCIATED EQUIPMENT |
BS 1524:1993
|
Specification for cellulose acetate moulding materials |
DEFSTAN 81-101/3(2016) : 2016
|
REUSABLE WATER VAPOUR RESISTANT BAGS FOR ENGINE CHANGE UNITS, PROPULSION UNITS, AND ASSOCIATED EQUIPMENT |
BS 7291-3:1990
|
Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings Specification for crosslinked polyethylene (PE-X) pipes and associated fittings |
BS 3G 198-3:1994
|
Sleeves for aircraft electric cables and equipment wires Specification for heat-shrinkable sleeving for binding, insulation and identification |
BS 2782-11:Method 1110:1989
|
Methods of testing plastics. Thermoplastics pipes, fittings and valves Tensile properties of dumb-bell specimens from PVC gutter profiles of pipes for non-pressure applications |
BS 7413:1991
|
Specification for white PVC-U extruded hollow profiles with heat welded corner joints for plastics windows: materials type A |
BS 5409-2:1978
|
Specification for nylon tubing Plasticized and unplasticized nylon tubing types 11 and 12 for use primarily in the automobile industry |
BS 4932:1973
|
Specification for heavy duty low density polyethylene sacks |
BS G 198-5:1997
|
Sleeves and moulded components for aircraft electric cables and equipment wires Specification for heat shrinkable moulded shapes |
BS 3G 198-2:1997
|
Sleeves for aircraft electric cables and equipment wires Specification for slip-on sleeves for identification purposes |
BS 4G 198-3:1999
|
Sleeves and moulded components for aircraft electric cables and equipment wires Specification for heat-shrinkable sleeving for binding, insulation, and identification |
BS 7281:1990
|
Specification for polyethylene pipes for the supply of gaseous fuels |
BS 5734-4:1980
|
Polyester moulding compounds for electrical and other purposes Specification for sheet moulding compounds for electrical purposes |
BS EN ISO 4599:1997
|
Plastics. Determination of resistance to environmental stress cracking (ESC). Bent strip method |
I.S. EN 10245-1:2011
|
STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
BS 5734-5:1990
|
Polyester moulding compounds for electrical and other purposes Specification for sheet moulding compounds for mechanical purposes |
BS 5139:1991
|
Method of specifying general purpose polypropylene and propylene copolymer materials for moulding and extrusion |
BS 3159-2:1993
|
Woodworking saws for hand use Specification for tenon and dovetail saws |
BS 3412:1992
|
Methods of specifying general purpose polyethylene materials for moulding and extrusion |
BS 4936:1987
|
Method of specifying styrene-acrylonitrile (SAN) moulding and extrusion materials |
BS 5734-4:1990
|
Polyester moulding compounds for electrical and other purposes Specification for sheet moulding compounds for electrical purposes |
BS 2782-3:Method 327A:1993
|
Methods of testing plastics. Mechanical properties Determination of tensile strength and elongation at break of polytetrafluoroethylene (PTFE) products |
BS 1493:1987
|
Method of specifying general purpose polystyrene (PS) moulding and extrusion materials |
BS 3159-1:1999
|
Woodworking saws for hand use Specification for hand saws |
BS 4576-1:1989
|
Unplasticized polyvinyl chloride (PVC-U) rainwater goods and accessories Half-round gutters and pipes of circular cross-section |
BS 1753:1987
|
Specification for safety requirements for children\'s cots for domestic use |
BS 2571:1990
|
Specification for general-purpose flexible PVC compounds for moulding and extrusion |
BS 3532:1990
|
Method of specifying unsaturated polyester resin systems |
BS 7413:2002
|
Unplasticized polyvinyl chloride (PVC-U) profiles for windows and doors. Specification |
BS 4863:1991
|
Specification for safety requirements for playpens for domestic use |
BS 4125:1991
|
Specification for safety requirements for child safety barriers for domestic use |
BS 4213:1986
|
Specification for cold water storage and feed and expansion cisterns (polyolefin or olefin copolymer) and cistern lids |
BS 3159-1:1990
|
Woodworking saws for hand use Specification for hand saws |
BS 4213:1991
|
Specification for cold water storage and combined feed and expansion cisterns (polyolefin or olefin copolymer) up to 500 L capacity used for domestic purposes |
BS 4514:1983
|
Specification for unplasticized PVC soil and ventilating pipes, fittings and accessories |
BS 4994:1987
|
Specification for design and construction of vessels and tanks in reinforced plastics |
BS 3G 198-4:1996
|
Sleeves for aircraft electric cables and equipment wires Specification for fluoropolymer heat shrinkable sleeving for binding and insulation |
BS 7491-1:1991
|
Glass fibre reinforced plastics cisterns for cold water storage Specification for one-piece cisterns of capacity up to 500 L |
BS 3531-21:1986
|
Surgical implants Specification for ultra-high molecular mass polyethylene in moulded form |
BS 6464:1984
|
Specification for reinforced plastics pipes, fittings and joints for process plants |
BS 5620:1979
|
Specification for 200 A flameproof restrained and bolted plugs and sockets for voltages not exceeding 1100 V, primarily for use in mining |
BS 2782-3 Method 360B:1980
|
Methods of testing plastics. Mechanical properties Determination of tear strength of sheet and sheeting (trouser tear method) |
BS 4660:1973
|
Specification for unplasticized PVC underground drain pipe and fittings |
BS 6374-1:1985
|
Lining of equipment with polymeric materials for the process idustries. Specification for lining with sheet thermoplastics |
BS 7008-2:1988
|
Acquisition and presentation of comparable data for basic properties of plastics Method for multipoint data |
BS 2782-9 Method 902A:1977
|
Methods of testing plastics. Sampling and test specimen preparation Compression moulding test specimens of thermosetting materials |
BS 6728-2:1993
|
Thermoplastics hot water bottles Specification for hot water bottles manufactured from polyolefin materials |
BS 6319-7:1985
|
Testing of resin and polymer/cement compositions for use in construction Method for measurement of tensile strength |
BS 771-2:1980
|
Phenolic moulding materials Specification for physical properties of type L2 material |
UNI EN 10245-1 : 2011
|
STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
BS 6250-2:1991
|
Domestic and contract furniture Specification for performance requirements for tables and trolleys |
BS 6250-3:1991
|
Domestic and contract furniture Specification for performance requirements for cabinet furniture |
BS 6437:1984
|
Specification for polyethylene pipes (type 50) in metric diameters for general purposes |
BS 2782-3 Method 327A:1982
|
Methods of testing plastics. Mechanical properties Determination of tensile strength and elongation at break of polytetrafluoroethylene (PTFE) products |
BS 7414:1991
|
Specification for white PVC-U extruded hollow profiles with heat welded corner joints for plastics windows: materials type B |
BS 5734-5:1980
|
Polyester moulding compounds for electrical and other purposes Specification for sheet moulding compounds for mechanical purposes |
BS 6728-1:1986
|
Thermoplastics hot water bottles Specification for hot water bottles manufactured from PVC compounds |
BS 7423:1991
|
Specification for safety requirements for children\'s travel cots of internal base length not less than 900 mm |
BS 5799:1986
|
Specification for safety requirements for children\'s high chairs and multi-purpose high chairs for domestic use |
BS 6250-1:1982
|
Domestic and contract furniture Specification for performance requirements for seating |
BS 7019:1989
|
Specification for fully screened 400 A bolted flameproof cable couplers and adaptors for use on systems up to and including 6.6 kV, primarily for use in mines |
BS EN 10245-1:2011
|
Steel wire and wire products. Organic coatings on steel wire General rules |
UNE-EN 10245-1:2012
|
Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
DIN EN 10245-1:2012-01
|
STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
BS 3905:1995
|
Specification for 3.8/6.6 kV, 300 A bolted flameproof cable couplers and adaptors, for use in coal mines. |
BS 5125:1990
|
Specification for 50 A 650 V flameproof, restrained and bolted plugs and sockets for use in coal mines |
BS 3454:1995
|
Specification for 1.9/3.3 kV, 300 A bolted flameproof cable couplers and adaptors (including 380/660 V and 640/1100 V, 300 A adaptors) for use in coal mines |
BS 2782-3:Method 360C:1991
|
Methods of testing plastics. Mechanical properties Determination of tear resistance of plastics film and sheeting by the initiation method |
BS 3454:1984
|
Specification for 1.9/3.3 kV, 300 A bolted flameproof cable couplers and adaptors (including 380/660 V and 640/1100 V, 300 A adaptors), primarily for use in mines |
ESI 12-23 : ISSUE 1
|
POLYETHYLENE PROTECTION TAPE FOR BURIED ELECTRICITY SUPPLY CABLE |
BS 2782-10:Method 1005:1977
|
Methods of testing plastics. Glass reinforced plastics Determination of flexural properties. Three point method |
BS 879-2:1988
|
Water well casing Specification for thermoplastics tubes for casing and slotted casing |
BS 4991:1974
|
Specification for propylene copolymer pressure pipe |
BS 3126:1987
|
Method of specifying toughened polystyrene (SB) moulding and extrusion materials |
BS 6730:1986
|
Specification for black polyethylene pipes up to nominal size 63 for above ground use for cold potable water |
ISO/TR 15655:2003
|
Fire resistance Tests for thermo-physical and mechanical properties of structural materials at elevated temperatures for fire engineering design |
BS 493(1995) : 1995
|
SPECIFICATION FOR AIRBRICKS AND GRATINGS FOR WALL VENTILATION |
BS 3794-1:1986
|
Decorative, high pressure laminates (HPL) based on thermosetting resins Specification for performance |
BS 4935:1989
|
Method of specifying acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials |