BS 2TA 100:1973
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Procedure for inspection and testing of wrought titanium and titanium alloys
Available format(s)
Hardcopy , PDF
Superseded date
30-11-2009
Superseded by
Language(s)
English
Published date
15-06-2000
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 General requirements
2 Bar and section for machining
3 Forging stock
4 Forgings
5 Sheet and strip
6 Plate
7 Tube
8 Wire
Appendix A - Notes on Table 3 to Table 6
Figure 1
Figure 2
Table 1 - Tolerances on diameter of wire for general
purposes
Table 2 - Tolerances on diameter of wire for special
purposes
Table 3 - Tolerances on thickness of sheet and strip
Table 4 - Shearing tolerances for sheet and strip
Table 5 - Tolerances on thickness of plate
Table 6 - Tolerances on width and length of plate
Describes the procedure for inspection and testing of wrought titanium and titanium alloys.
| Committee |
ACE/61
|
| DevelopmentNote |
Supersedes 71/31144 DC, 98/714181 DC and BS TA100(1967). (05/2005)
|
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| 09/30193246 DC : 0 | BS 3TA 7 - SPECIFICATION FOR BAR AND SECTION OF COMMERCIALLY PURE TITANIUM (TENSILE STRENGTH 540-740 MPA) |
| BS 3TA 13:2009 | Specification for forgings of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm) |
| BS 2TA 3:1973 | SPECIFICATION FOR BAR AND SECTION FOR MACHINING OF COMMERCIALLY PURE TITANIUM (TENSILE STRENGTH 390-540 N/MM[2]) |
| 09/30193173 DC : 0 | BS 2TA 40 - SPECIFICATION FOR BAR FOR MACHINING OF TITANIUM-ALUMINIUM-MOLYBDENUM-TIN-SILICON-CARBON ALLOY (TENSILE STRENGTH 1205-1375 MPA) (LIMITING RULING SECTION OVER 25 MM UP TO AND INCLUDING 75 MM) |
| 09/30193248 DC : 0 | BS 3TA 10 - SPECIFICATION FOR SHEET OF TITANIUM-ALUMINIUM-VANADIUM ALLOY (TENSILE STRENGTH 960-1270 MPA) |
| BS TA 54:1973 | Specification for forging stock of titanium-copper alloy (tensile strength 650-880 N/mm<sup>2</sup>) (limiting ruling section 75 mm) |
| BS 2TA 39:2009 | Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1250-1420 MPa) (limiting ruling section 25 mm) |
| BS 2TA 23:1973 | Specification for forging stock of titanium-copper alloy (tensile strength 540-770 N/mm<sup>2</sup>) |
| 09/30193244 DC : 0 | BS 3TA 6 - SPECIFICATION FOR SHEET AND STRIP OF COMMERCIALLY PURE TITANIUM (TENSILE STRENGTH 570-730 MPA) |
| BS 2TA 8:1973 | Specification for forging stock of commercially pure titanium (tensile strength 540-740 N/mm<sup>2</sup>) |
| BS 3TA 2:2009 | Specification for sheet and strip of commercially pure titanium (tensile strength 390-540 MPa) |
| BS TA 39:1971 | Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1250-1420 N/mm<sup>2</sup>) (limiting ruling section 25 mm) |
| BS 3TA11(2009) : 2009 | AEROSPACE SERIES - SPECIFICATION FOR BAR AND SECTION FOR MACHINING OF TITANIUM-ALUMINIUM-VANADIUM ALLOY (TENSILE STRENGTH 900-1160 MPA) (LIMITING RULING SECTION 150 MM) |
| BS TA 47:1973 | Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1220 N/mm<sup>2</sup>) (limiting ruling section 100 mm) |
| BS TA 41:1971 | Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 N/mm<sup>2</sup>) (limiting ruling section over 25 mm up to and including 75 mm) |
| BS 2TA 45:2009 | Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1100-1280 MPa) (limiting ruling section 25 mm) |
| 09/30193254 DC : 0 | BS 3TA 13 - SPECIFICATION FOR FORGINGS OF TITANIUM-ALUMINIUM-VANADIUM ALLOY (TENSILE STRENGTH 900-1160 MPA) (LIMITING RULING SECTION 150 MM) |
| 09/30193250 DC : 0 | BS 3TA 11 - SPECIFICATION FOR BAR AND SECTION FOR MACHINING OF TITANIUM-ALUMINIUM-VANADIUM ALLOY (TENSILE STRENGTH 900-1160 MPA) (LIMITING RULING SECTION 150 MM) |
| 09/30193175 DC : 0 | BS 2TA 41 - SPECIFICATION FOR FORGING STOCK OF TITANIUM-ALUMINIUM-MOLYBDENUM-TIN-SILICON-CARBON ALLOY (TENSILE STRENGTH 1205-1375 MPA) (LIMITING RULING SECTION OVER 25 MM UP TO AND INCLUDING 75 MM) |
| BS 2TA 24:1973 | Specification for forgings of titanium-copper alloy (tensile strength 540-770 N/mm<sup>2</sup>) |
| 09/30193537 DC : 0 | BS 2TA 51 - SPECIFICATION FOR FORGINGS OF TITANIUM-ALUMINIUM-MOLYBDENUM-TIN-SILICON ALLOY - TENSILE STRENGTH 1000-1200 MPA - LIMITING RULING SECTION OVER 100 MM UP TO AND INCLUDING 150 MM |
| BS 3TA 10:2009 | Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 960-1270 MPa) |
| BS TA 56:1974 | Specification for plate of titanium-aluminium-vanadium alloy (tensile strength 895-1150 MPa) (maximum thickness 100 mm) |
| BS 2TA 57:2009 | Specification for plate of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1030-1220 MPa) (thickness over 50 mm up to and including 65 mm) |
| BS TA 38:1971 | Specification for bar for machining of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1250-1420 N/mm<sup>2</sup>) (limiting ruling section 25 mm) |
| 09/30193240 DC : 0 | BS 3TA 1 - SPECIFICATION FOR SHEET AND STRIP OF COMMERCIALLY PURE TITANIUM (TENSILE STRENGTH 290-420 MPA) |
| 09/30193256 DC : 0 | BS 3TA 21 - SPECIFICATION FOR SHEET AND STRIP OF TITANIUM-COPPER ALLOY (TENSILE STRENGTH 540-700 MPA) |
| 09/30193258 DC : 0 | BS 3TA 28 - SPECIFICATION FOR FORGING STOCK AND WIRE OF TITANIUM-ALUMINIUM-VANADIUM ALLOY (TENSILE STRENGTH 1100-1300 MPA) (LIMITING RULING SECTION 20 MM) |
| BS 2TA 11:1974 | Specification for bar and section for machining of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm) |
| BS TA 51:1973 | Specification for forgings of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1000-1200 N/mm<sup>2</sup>) (limiting ruling section over 100 mm up to and including 150 mm) |
| 09/30193535 DC : 0 | BS 2TA 50 - SPECIFICATION FOR FORGING STOCK OF TITANIUM-ALUMINIUM-MOLYBDENUM-TIN-SILICON ALLOY - TENSILE STRENGTH 1000-1200 MPA - LIMITING RULING SECTION OVER 100 MM UP TO AND INCLUDING 150 MM |
| BS 2TA 10:1974 | Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 960-1270 MPa) |
| BS 3TA 12:2009 | Specification for forging stock of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm) |
| BS 2TA 7:1973 | Specification for bar and section for machining of commercially pure titanium (tensile strength 540-740 N/mm<sup>2</sup>) |
| BS TA 52:1973 | Specification for sheet and strip of titanium-copper alloy (tensile strength 690-920 N/mm<sup>2</sup>) |
| BS 2TA 28:1974 | Specification for forging stock and wire of titanium-aluminium-vanadium alloy (tensile strength 1100-1300 MPa) (limiting ruling section 20 mm) (primarily intended for the manufacture of fasteners complying with the requirements of the \'A\' series of British Standards) |
| BS 2TA 40:2009 | Specification for bar for machining of titanium- aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 MPa) (limiting ruling section over 25 mm up to and including 75 mm) |
| 09/30193185 DC : 0 | BS 2TA 48 - SPECIFICATION FOR FORGINGS OF TITANIUM-ALUMINIUM-MOLYBDENUM-TIN-SILICON-CARBON ALLOY (TENSILE STRENGTH 1050-1200 MPA) (LIMITING RULING SECTION 100 MM) |
| BS TA 48:1973 | Specification for forgings of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1200 N/mm<sup>2</sup>) (limiting ruling section 100 mm) |
| 09/30193242 DC : 0 | BS 3TA 2 - SPECIFICATION FOR SHEET AND STRIP OF COMMERCIALLY PURE TITANIUM (TENSILE STRENGTH 390-540 MPA) |
| BS 2TA 9:1973 | Specification for forgings of commercially pure titanium (tensile strength 540-740 N/mm<sup>2</sup>) |
| BS 2TA 13:1974 | Specification for forgings of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm) |
| BS 2TA 21:1973 | Specification for sheet and strip of titanium-copper alloy (tensile strength 540-700 MPa) |
| BS TA 42:1971 | Specification for forgings of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 N/mm<sup>2</sup>) (limiting ruling section over 25 mm up to and including 75 mm) |
| BS TA 45:1973 | Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1100-1280 N/mm<sup>2</sup>) (limiting ruling section 25 mm) |
| BS 2TA 48:2009 | Specification for forgings of titanium-aluminium-molybdenum- tin-silicon-carbon alloy (tensile strength 1050-1200 MPa) (limiting ruling section 100 mm) |
| BS TA 58:1974 | Specification for plate of titanium-copper alloy (tensile strength 520-640 MPa) (maximum thickness 10 mm) |
| 09/30193179 DC : 0 | BS 2TA 45 - SPECIFICATION FOR BAR AND SECTION OF TITANIUM-ALUMINIUM-MOLYBDENUM-TIN-SILICON-CARBON ALLOY (TENSILE STRENGTH 1100-1280 MPA) (LIMITING RULING SECTION 25 MM) |
| BS 2TA 58:2009 | Specification for plate of titanium-copper alloy (tensile strength 520-640 MPa) (maximum thickness 10 mm) |
| BS TA 50:1973 | Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1000-1200 N/mm<sup>2</sup>) (limiting ruling section over 100 mm up to and including 150 mm) |
| 09/30193543 DC : 0 | BS 2TA 57 - SPECIFICATION FOR PLATE OF TITANIUM-ALUMINIUM-MOLYBDENUM-TIN-SILICON ALLOY - TENSILE STRENGTH 1030-1220 MPA - MAXIMUM THICKNESS 65 MM |
| BS 2TA 41:2009 | Specification for forging stock of titanium- aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 MPa) (limiting ruling section over 25 mm up to and including 75 mm) |
| 09/30193547 DC : 0 | BS 2TA 59 - SPECIFICATION FOR SHEET OF TITANIUM-ALUMINIUM-VANADIUM ALLOY - TENSILE STRENGTH 920-1180 MPA |
| BS 3TA 6:2009 | Specification for sheet and strip of commercially pure titanium (tensile strength 570-730 MPa) |
| 09/30193187 DC : 0 | BS 2TA 49 - SPECIFICATION FOR BAR AND SECTION FOR MACHINING OF TITANIUM-ALUMINIUM-MOLYBDENUM-TIN-SILICON-CARBON ALLOY (TENSILE STRENGTH 1000-1200 MPA) (LIMITING RULING SECTION OVER 100 MM UP TO AND INCLUDING 150 MM) |
| BS 2TA 46:2009 | Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1220 MPa) (limiting ruling section over 25 mm up to and including 100 mm) |
| BS TA 43:1972 | Specification for forging stock of titanium-aluminium-zirconium-molybdenum-silicon alloy (tensile strength 990-1140 N/mm<sup>2</sup>) (limiting ruling section 65 mm) |
| 09/30193252 DC : 0 | BS 3TA 12 - SPECIFICATION FOR FORGING STOCK OF TITANIUM-ALUMINIUM-VANADIUM ALLOY (TENSILE STRENGTH 900-1160 MPA) (LIMITING RULING SECTION 150 MM) |
| BS TA 53:1973 | Specification for bar and section for machining of titanium-copper alloy (tensile strength 650-880 N/mm<sup>2</sup>) (limiting ruling section 75 mm) |
| 09/30193541 DC : 0 | BS 2TA 56 - SPECIFICATION FOR PLATE OF TITANIUM-ALUMINIUM-VANADIUM ALLOY - TENSILE STRENGTH 895-1150 MPA - MAXIMUM THICKNESS 100 MM |
| BS 3TA 1:2009 | Specification for sheet and strip of commercially pure titanium (tensile strength 290-420 MPa) |
| BS 2TA 49:2009 | Specification for bar and section for machining of titanium-aluminium- molybdenum-tin-silicon-carbon alloy (Tensile strength 1000-1200 MPa) (Limiting ruling section over 100 mm up to and including 150 mm) |
| BS 2TA 56:2009 | Specification for plate of titanium-aluminium-vanadium alloy (tensile strength 895-1150 MPa) (maximum thickness 100 mm) |
| BS 2TA 38:2009 | Specification for bar for machining of titanium-aluminium-molybdenum-tin-silicon- carbon alloy (tensile strength 1250-1420 MPa) (limiting ruling section 25 mm) |
| BS 2TA 59:2009 | Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 920-1180 MPa) |
| BS 2TA 42:2009 | Specification for forgings of titanium-aluminium- molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 MPa) (limiting ruling section over 25 mm up to and including 75 mm) |
| BS 2TA 51:2009 | Specification for forgings of titanium-aluminium- molybdenum-tin-silicon alloy (tensile strength 1000-1200 MPa) (limiting ruling section over 100 mm up to and including 150 mm) |
| BS 2TA 22:1973 | Specification for bar and section for machining of titanium-copper alloy (tensile strength 540-770 N/mm<sup>2</sup>) |
| BS 3TA 21:2009 | Specification for sheet and strip of titanium-copper alloy (tensile strength 540-700 MPa) |
| BS 2TA 52:2009 | Specification for sheet and strip of titanium- copper alloy (tensile strength 690-920 MPa) |
| 09/30193545 DC : 0 | BS 2TA 58 - SPECIFICATION FOR PLATE OF TITANIUM-COPPER ALLOY - TENSILE STRENGTH 520-640 MPA - MAXIMUM THICKNESS 10 MM |
| BS TA 55:1973 | Specification for forgings of titanium-copper alloy (tensile strength 650-880 N/mm<sup>2</sup>) (limiting ruling section 75 mm) |
| BS 2TA 47:2009 | Specification for forging stock of titanium- aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1220 MPa) (limiting ruling section 100 mm) |
| BS 3TA 7:2009 | Specification for bar and section for machining of commercially pure titanium (tensile strength 540-740 MPa) |
| 09/30193183 DC : 0 | BS 2TA 47 - SPECIFICATION FOR FORGING STOCK OF TITANIUM-ALUMINIUM-MOLYBDENUM-TIN-SILICON-CARBON ALLOY (TENSILE STRENGTH 1050-1220 MPA) (LIMITING RULING SECTION 100 MM) |
| BS TA 44:1972 | Specification for forgings of titanium-aluminium-zirconium-molybdenum-silicon alloy (tensile strength 990-1140 N/mm<sup>2</sup>) (limiting ruling section 65 mm) |
| BS TA 46:1973 | Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1220 N/mm<sup>2</sup>) (limiting ruling section over 25 mm up to and including 100 mm) |
| BS 2TA 12:1974 | Specification for forging stock of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm) |
| BS TA 59:1980 | Specification for sheet and strip of titanium-aluminium-vanadium alloy (tensile strength 920 MPa to 1180 MPa) |
| 09/30193181 DC : 0 | BS 2TA 46 - SPECIFICATION FOR BAR AND SECTION FOR MACHINING OF TITANIUM-ALUMINIUM-MOLYBDENUM-TIN-SILICON-CARBON ALLOY (TENSILE STRENGTH 1050-1220 MPA) (LIMITING RULING SECTION OVER 25 MM UP TO AND INCLUDING 100 MM) |
| BS 2TA 4:1973 | Specification for forging stock of commercially pure titanium (tensile strength 390-540 N/mm<sup>2</sup>) |
| BS TA 57:1974 | Specification for plate of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1030-1220 MPa) (maximum thickness 65 mm) |
| BS 2TA 50:2009 | Specification for forging stock of titanium- aluminium-molybdenum-tin-silicon alloy (tensile strength 1000-1200 MPa) (limiting ruling section over 100 mm up to and including 150 mm) |
| 09/30193169 DC : 0 | BS 2TA 38 - SPECIFICATION FOR BAR FOR MACHINING OF TITANIUM-ALUMINIUM-MOLYBDENUM-TIN-SILICON-CARBON ALLOY (TENSILE STRENGTH 1250-1420 MPA) (LIMITING RULING SECTION 25 MM) |
| BS 2TA 5:1973 | Specification for forgings of commercially pure titanium (tensile strength 390-540 N/mm<sup>2</sup>) |
| 09/30193171 DC : 0 | BS 2TA 39 - SPECIFICATION FOR FORGING STOCK OF TITANIUM-ALUMINIUM-MOLYBDENUM-TIN-SILICON-CARBON ALLOY (TENSILE STRENGTH 1250-1420 MPA) (LIMITING RULING SECTION 25 MM) |
| 09/30193539 DC : 0 | BS 2TA 52 - SPECIFICATION FOR SHEET AND STRIP OF TITANIUM-COPPER ALLOY - TENSILE STRENGTH 690-920 MPA |
| BS TA 40:1971 | Specification for bar for machining of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 N/mm<sup>2</sup>) (limiting ruling section over 25 mm up to and including 75 mm) |
| 09/30193177 DC : 0 | BS 2TA 42 - SPECIFICATION FOR FORGINGS OF TITANIUM-ALUMINIUM-MOLYBDENUM-TIN-SILICON-CARBON ALLOY (TENSILE STRENGTH 1205-1375 MPA) (LIMITING RULING SECTION OVER 25 MM UP TO AND INCLUDING 75 MM) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.