BS 2X 35(2003) : 2003
Current
The latest, up-to-date edition.
SELECTIVELY REMOVABLE INTERMEDIATE COATING FOR AEROSPACE PURPOSES
Hardcopy , PDF
English
01-01-2003
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Committees responsible
Foreword
1 Scope
2 Normative references
3 Definitions
4 Materials
5 Performance
6 Batch inspection
7 Marking
Annex A (normative) - Type approval
Annex B (normative) - Preparation of test panels
Annex C (normative) - Method for determination of ability to
selectively remove
Annex D (normative) - Method for determination of ability to
restore the paint scheme after selective removal
List of references
Describes requirements for three types of intermediate coating, type A, type B and type C, which when incorporated in a paint scheme between primer and finish, allow selective removal of the finish using a defined paint remover.
| Committee |
ACE/44
|
| DevelopmentNote |
Supersedes BS X 35(1998) and 02/708991 DC (11/2003) 2003 Edition Re-Issued in March 2015 & incorporates AMD 1 2015. Supersedes 14/30290245 DC. (03/2015)
|
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| BS EN ISO 1514:2004 | Paints and varnishes. Standard panels for testing |
| BS EN ISO 1518:2001 | Paints and varnishes. Scratch test |
| BS EN ISO 1513:1995 | Paints and varnishes. Examination and preparation of samples for testing |
| BS EN ISO 3696:1995 | Water for analytical laboratory use. Specification and test methods |
| BS 2X 34:1998 | Specification for two component polyurethane finish for aerospace purposes |
| BS EN 23270:1991 | Specification for temperatures and humidities for conditioning and testing paints, varnishes and their raw materials |
| BS EN ISO 16474-3:2013 | Paints and varnishes. Methods of exposure to laboratory light sources Fluorescent UV lamps |
| BS EN ISO 4618:2014 | Paints and varnishes. Terms and definitions |
| BS EN ISO 6272:1994 | Paints and varnishes. Falling-weight test |
| BS EN ISO 9117-1:2009 | Paints and varnishes. Drying tests Determination of through-dry state and through-dry time |
| BS EN ISO 2431:2011 | Paints and varnishes. Determination of flow time by use of flow cups |
| BS 3900-D9:1986 | Methods of test for paints. Optical tests on paint films Determination of colour and colour difference: measurement |
| BS X 36:1998 | Specification for paint remover for air drying selectively removable paint scheme for aerospace purposes |
| BS EN ISO 2812-1:2007 | Paints and varnishes. Determination of resistance to liquids Immersion in liquids other than water |
| ISO 16474-3:2013 | Paints and varnishes Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps |
| ISO 11890-1:2007 | Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method |
| DEFSTAN 79-17/2(1998) : 1998 | COMPOUND, CLEANING, FOAMING, FOR AIRCRAFT SURFACES |
| BS EN ISO 1520:2006 | Paints and varnishes. Cupping test |
| BS EN ISO 11507:2007 | Paints and varnishes. Exposure of coatings to artificial weathering. Exposure to fluorescent UV lamps and water |
| BS EN ISO 3668:2001 | Paints and varnishes. Visual comparison of the colour of paints |
| BS EN ISO 11890-1:2007 | Paints and varnishes. Determination of volatile organic compound (VOC) content Difference method |
| BS EN 29117:1992 | Methods of test for paints. Tests associated with paint film formation Paints and varnishes. Determination of through-dry state and through-dry time. Method of test |
| BS EN ISO 2812-2:2007 | Paints and varnishes. Determination of resistance to liquids Water immersion method |
| ISO 6272-1:2011 | Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter |
| BS EN ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes. Sampling |
| ISO 4618:2014 | Paints and varnishes — Terms and definitions |
| BS L 163:1978 | Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated, cold worked for flattening and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8) |
| BS 3900-D10:1986 | Methods of test for paints Determination of colour and colour difference: calculation |
| BS EN ISO 1518-1:2011 | Paints and varnishes. Determination of scratch resistance Constant-loading method |
| BS EN ISO 2409:2013 | Paints and varnishes. Cross-cut test |
| BS 3900-D8:1986 | Methods of test for paints. Optical tests on paint films Determination of colour and colour difference: principles |
| BS EN 2334:1997 | Chromic-sulphuric acid pickle of aluminium and aluminium alloys |
| ISO 9117-1:2009 | Paints and varnishes — Drying tests — Part 1: Determination of through-dry state and through-dry time |
| BS EN ISO 2813:2014 | Paints and varnishes. Determination of gloss value at 20 degrees, 60 degrees and 85 degrees |
| BS 2X 33:1998 | Specification for two component epoxy primer for aerospace purposes |
| DEFSTAN 00-72/2(2005) : 2005 | CHEMICAL AGENT RESISTANCE REQUIREMENTS FOR COATINGS APPLIED TO MILITARY EQUIPMENT |
| BS EN ISO 6272-1:2011 | Paints and varnishes. Rapid-deformation (impact resistance) tests Falling-weight test, large-area indenter |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.