• There are no items in your cart

BS 3156-11.0.2(1998) : 1998 AMD 16105

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

ANALYSIS OF FUEL GASES - METHODS FOR NON-MANUFACTURED GASES - GENERAL - QUALITY DESIGNATION FOR NATURAL GAS

Superseded date

15-02-2006

Published date

23-11-2012

Introduction
1 Scope
2 Normative references
3 Definitions
4 Symbols, abbreviations and units
5 Quality designation parameters
    5.1 Gas composition
    5.2 Gas properties
6 Sampling
Annex A (informative) Introduction to informative annexes
    A.1 Quality specification
    A.2 Interchangeability
    A.3 Natural gas, Local distribution system
    A.4 Condensation curves
    A.5 Odorization
    A.6 Nominal range of natural gas components
Annex B (informative) German Regulations Code of Practice
DVGW G 260 I:1983, G 260/II: 1990 Extract of the relevant
parts for natural gases
    B.1 Basic gases, substitute gases, additive gases
    B.2 Standard state
    B.3 Standard values
    B.4 Gas families, groups
    B.5 Gas composition
    B.6 Notes on the technical burning data
    B.7 Notes on the gas constituents and gas secondary
        substances
    B.8 Data and guide values for the gas quality
Annex C (informative) European standard EN 437 "Test gases,
test pressures and categories of appliances"
Annex D (informative) Interchangeability A.G.A. Index Method
    D.1 Example for a calculation
Annex E (informative) British Gas Hydrocarbon Equivalence
Method
    E.1 Composition-based prediction
    E.2 Prediction of Interchangeability
    E.3 Three Dimensional Prediction Diagram
Annex F (informative) Weaver Index Method
Annex G (informative) French Method for Determining Gas
Interchangeability (Delbourg method)
    G.1 Calculation of Interchangeability Indices on the
        Basis of Chemical Composition of the Gas
    G.2 Interchangeability limits for Second-family Gases
        for Domestic Appliances at 20 mbar
Annex H (informative) Bibliography

Defines parameters needed for description of finally processed, and where needed, blended natural gas.

Committee
PTI/15
DevelopmentNote
Supersedes 94/111112 DC (07/2005) Renumbered and superseded by BS EN ISO 13686 (05/2006)
DocumentType
Standard
PublisherName
British Standards Institution
Status
Superseded
SupersededBy
Supersedes

ISO 6570-1:1983 Natural gas Determination of potential hydrocarbon liquid content Part 1: Principles and general requirements
ISO 10715:1997 Natural gas — Sampling guidelines
ISO 6976:2016 Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition
ISO 6327:1981 Gas analysis — Determination of the water dew point of natural gas — Cooled surface condensation hygrometers
ISO 10723:2012 Natural gas — Performance evaluation for analytical systems
ISO 6975:1997 Natural gas — Extended analysis — Gas-chromatographic method
ISO 10101-1:1993 Natural gas — Determination of water by the Karl Fischer method — Part 1: Introduction
ISO 13734:2013 Natural gas — Organic components used as odorants — Requirements and test methods
ISO 6570-3:1984 Natural gas Determination of potential hydrocarbon liquid content Part 3: Volumetric method
ISO 14532:2014 Natural gas — Vocabulary
ISO 6570-2:1984 Natural gas Determination of potential hydrocarbon liquid content Part 2: Weighing method
ISO 10101-2:1993 Natural gas — Determination of water by the Karl Fischer method — Part 2: Titration procedure
ISO 13443:1996 Natural gas Standard reference conditions
ISO 10101-3:1993 Natural gas — Determination of water by the Karl Fischer method — Part 3: Coulometric procedure
ISO 6326-1:2007 Natural gas Determination of sulfur compounds Part 1: General introduction
ISO 11541:1997 Natural gas Determination of water content at high pressure
ISO 14111:1997 Natural gas — Guidelines to traceability in analysis
ISO 6568:1981 Natural gas — Simple analysis by gas chromatography
ISO 12213-1:2006 Natural gas Calculation of compression factor Part 1: Introduction and guidelines
ISO 7504:2015 Gas analysis Vocabulary
ISO 6326-5:1989 Natural gas Determination of sulfur compounds Part 5: Lingener combustion method
ISO 6326-3:1989 Natural gas Determination of sulfur compounds Part 3: Determination of hydrogen sulfide, mercaptan sulfur and carbonyl sulfide sulfur by potentiometry
ISO 6326-4:1994 Natural gas — Determination of sulfur compounds — Part 4: Gas chromatographic method using a flame photometric detector for the determination of hydrogen sulfide, carbonyl sulfide and sulfur-containing odorants
ISO 6326-2:1981 Gas analysis Determination of sulphur compounds in natural gas Part 2: Gas chromatographic method using an electrochemical detector for the determination of odoriferous sulphur compounds
ISO 6974:1984 Natural gas — Determination of hydrogen, inert gases and hydrocarbons up to C8 — Gas chromatographic method

Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.