BS 3763:1964
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
The International System of units (SI)
Available format(s)
Hardcopy
Superseded date
23-07-2013
Superseded by
Language(s)
English
Published date
29-06-1964
Publisher
DocumentType |
Standard
|
Pages |
0
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy |
BS HC 404:1977 | Specification for chromium-molybdenum alloy cast iron ring pots (suitable for centrifugally cast and sand cast sealing rings, piston rings and cylinder liners) |
BS HC9(1974) : 1974 | AEROSPACE SERIES - SPECIFICATION FOR NICKEL-CHROMIUM-MOLYBDENUM STEEL CASTINGS (880-1080 MPA) |
BS HR 403:1973 | Specification for nickel-chromium-titanium heat-resisting alloy cold-worked and softened seamless tubes (nickel base, Cr 19.5, Ti 0.4) |
BS HR 6:1972 | Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6) |
BS HC 2:1973 | Specification for carbon-manganese steel castings (550 N/mm<sup>2</sup>) |
BS HR 650:1972 | Specification for high expansion heat-resisting steel bar and wire for the manufacture of bolts, studs, set screws and nuts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (limiting ruling section 20 mm) |
BS HR 204:1972 | Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy plate, sheet and strip (nickel base Cr 22, Fe 18.5, Mo 9, Co 1.5, W 0.6) |
BS HC 7:1974 | Specification for 3% chromium-molybdenum steel castings (880-1080 MPa) |
BS HC 106:1974 | Specification for precipitaton hardening chromium-nickel-copper corrosion-resisting steel castings (1250-1500 MPa) (Cr 16, Ni 4, Cu 3) |
BS HC 402:1977 | Specification for cast iron ring pots (centrifugally cast) (suitable for piston rings up to 200 mm in diameter) |
BS HC 401:1974 | Specification for 18% nickel maraging steel precision castings (1600-1850 MPa) |
BS HC 301:1973 | Specification for cobalt base chromium-nickel-tungsten alloy castings (Cr 25.5, Ni 10.5. W 7.5) |
BS HC 403:1977 | Specification for high chromium alloy cast iron ring pots (centrifugally cast) (suitable for piston rings up to 400 mm in diameter) |
BS 1188:1974 | Specification for ceramic wash basins and pedestals |
BS HR 4:1972 | Specification for nickel-chromium-cobalt-aluminium-molybdenum-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 15, Co 14.2, Al 5, Mo 4, Ti 4) |
BS HC 205:1974 | Specification for precipitation hardening nickel base chromium-cobalt-molybdenum-titanium alloy castings (Cr 20, Co 20, Mo 6, Ti 2) |
BS HR 251:1974 | Specification for heat-resisting alloy plate, sheet and strip (Ni 25.5, Cr 14.7, Ti 1.8, Mn 1.5, Mo 1.2, V 0.3, Fe remainder) |
BS CP118(1969) : 1969 AMD 1129 | THE STRUCTURAL USE OF ALUMINIUM |
BS HC 3:1973 | Specification for 1% chromium-molybdenum low alloy steel castings (700 N/mm<sup>2</sup>) |
BS HR 404:1973 | Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy cold worked solution treated seamless tubes (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5) |
BS HC8(1974) : 1974 | AEROSPACE SERIES - SPECIFICATION FOR 3% CHROMIUM-MOLYBDENUM STEEL CASTINGS (1150-1300 MPA) |
BS HR 51:1973 | Specification for heat-resisting alloy billets, bars, forgings and parts (Ni 25.5, Cr 14.7, Ti 2, Mn 1.5, Mo 1.2, Si 0.7, V 0.3, Fe remainder) |
BS 4462:1969 | Guide for the preparation of technical sales literature for measuring instruments and process control equipment |
BS HR 53:1973 | Specification for nickel-iron-chromium-molybdenum-titanium heat-resisting alloy billets, bars, forgings and parts (Ni/Co 42.5, Cr 12.5, Mo 5.8, Ti 3.0, Fe remainder) |
BS HR 240:1972 | Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy plate, sheet and strip (cobalt base Cr 20, W 15, Ni 10, Mn 1.5) |
BS HC 1:1973 | Specification for carbon steel castings (500 N/mm<sup>2</sup>) |
BS HC 5:1973 | Specification for 3% nickel case hardening steel castings (700 N/mm<sup>2</sup>) |
BS HC 202:1973 | Specification for precipitation hardening nickel base chromium-niobium-molybdenum-iron-tungsten alloy castings (Cr 20.0, Nb 6.6, Mo 6.0, Fe 3.0, W 2.5) |
BS HC 206:1975 | Specification for precipitation hardening nickel base chromium-cobalt-molybdenum-titanium alloy precision castings (Cr 20, Co 20, Mo 6, Ti 2) |
BS HR 10:1972 | Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5) |
BS HR 5:1972 | Specification for nickel-chromium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Ti 0.4) |
BS HR 52:1973 | Specification for heat-resisting alloy billets, bars, forgings and parts (Ni 25.5, Cr 14.7, Ti 1.8, Mn 1.5, Mo 1.2, V 0.3, Fe remainder) |
BS HR 40:1972 | Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy billets, bars and forgings (cobalt base, Cr 20, W 15, Ni 10, Mn 1.5) |
BS HR 207:1973 | Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy plate, sheet and strip (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remainder) |
BS HR 3:1972 | Specification for nickel-cobalt-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 14.8, Mo 5, Al 4.7, Ti 1.2) |
BS HC 4:1973 | Specification for 3% chromium-molybdenum steel castings (620-770 N/mm<sup>2</sup>) |
BS G 217:1975 | Specification for general requirements for cockpit lighting controllers |
BS HC 10:1974 | Specification for nickel-chromium-molybdenum steel castings (1150-1300 MPa) |
BS HC 6:1973 | Specification for 3% chromium-molybdenum nitriding steel castings (850-1000 N/mm<sup>2</sup>) |
BS HR 206:1973 | Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5) |
BS HR 402:1973 | Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold worked and softened seamless tubes (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) |
BS L 105:1971 | Specification for tube of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (not exceeding 10 mm wall thickness) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.