BS 4577:1970
|
Specification for materials for resistance welding electrodes and ancillary equipment |
BS 3673-2:1965
|
Specification for spring retaining rings Carbon steel E clips |
BS 7825-2:1996
|
Calibration of rubber and plastics test equipment Calibration procedures |
BS 2A 260-2A 265:2010
|
Specification for pan and 100° countersunk slotted head screws with ISO metric screw threads |
BS 2061:1953
|
Specification for phosphor bronze spring washers for general engineering purposes |
BS 2871-3:1972
|
Specification for copper and copper alloys. Tubes Tubes for heat exchangers |
BS 1804-3:1973
|
Specification for parallel steel dowel pins Parallel and taper types having screw threads for extraction purposes. Metric series |
BS 2569-2:1965
|
Specification for sprayed metal coatings Protection of iron and steel against corrosion and oxidation at elevated temperatures. |
95/711611 DC : 0
|
BS 919: PART 5 - GAUGES FOR TRAPEZOIDAL SCREW THREADS |
DEFSTAN 03-16/2(1995) : 1995
|
GUIDE TO SURFACING BY WELDING AND ASSOCIATED PROCESSES |
DEFSTAN 03-11/3(1995) : 1995
|
PHOSPHATE TREATMENT OF IRON AND STEEL |
DEFSTAN 03-27/2(1998) : 1998
|
ELECTRODEPOSITION OF NICKEL FOR ENGINEERING PURPOSES |
DEFSTAN 03-29/2(1997) : 1997
|
PROTECTION OF METALLIC SPRINGS AGAINST CORROSION |
DEFSTAN 03-2/3(1995) : 1995
|
CLEANING AND PREPARATION OF METAL SURFACES |
DEFSTAN 03-5/3(1995) : 1995
|
AUTOCATALYTIC (ELECTROLESS) NICKEL COATING OF METALS |
03/317781 DC : DRAFT OCT 2003
|
BS A 293 - SPECIFICATION FOR PROCUREMENT OF METRIC SERIES LOCKING NUTS WITH NON METALLIC LOCKING ELEMENT WITH MAXIMUM OPERATING TEMPERATURE NOT GREATER THAN 235 C |
BS 3673-1:1968
|
Specification for spring retaining rings Carbon steel circlips |
BS 4HR100(2010):2010
|
AEROSPACE SERIES - PROCEDURE FOR INSPECTION, TESTING AND ACCEPTANCE OF WROUGHT HEAT-RESISTING ALLOYS |
BS 4761:1971
|
Specification for sprayed unfused metal coatings for engineering purposes |
BS 4HR 100:2010+A1:2012
|
Aerospace series. Procedure for inspection, testing and acceptance of wrought heat-resisting alloys |
BS 3159-2:1993
|
Woodworking saws for hand use Specification for tenon and dovetail saws |
BS 4570:1985
|
Specification for fusion welding of steel castings |
BS 3127:1979
|
Specification for ferrous and non-ferrous Bourdon tubing |
BS 3066:1995
|
Specification for engineers\' cold chisels and allied tools |
BS 4882:1990
|
Specification for bolting for flanges and pressure containing purposes |
SBAC TS 26 : 4
|
TECHNICAL SPECIFICATION FOR ALL METAL SELF-LOCKING NUTS (UNJ THREADS) 1210 MPA (175,000 LBF/IN[2]) MINIMUM TENSILE STRENGTH AT AMBIENT TEMPERATURE |
SBAC TS 24 : 6
|
MANUFACTURING SPECIFICATION FOR BOLTS, 1275 MPA (185,000 LBF/IN[2]) - TENSILE AT ROOM TEMPERATURE, 1000 MPA (145,000 LBF/IN[2]) TENSILE AT 650 DEGREE C |
BS 970-1:1996
|
Specification for wrought steels for mechanical and allied engineering purposes General inspection and testing procedures and specific requirements for carbon, carbon manganese, alloy and stainless steels |
SAEITC TS 22 ISSUE 10 : 2008
|
MANUFACTURING SPECIFICATION FOR BOLTS, 1100 MPA (159,000 LBF/IN[2]) - ULTIMATE TENSILE STRENGTH - MINIMUM AT ROOM TEMPERATURE |
BS 187:1978
|
Specification for calcium silicate (sandlime and flintlime) bricks |
BS 4311-2:1994
|
Specification for gauge blocks and accessories Accessories |
BS 3555:1988
|
Specification for ring wrenches |
BS 970-1:1991
|
Specification for wrought steels for mechanical and allied engineering purposes General inspection and testing procedures and specific requirements for carbon, carbon manganese, alloy and stainless steels |
BS 2559:1994
|
Specification for screwdrivers and screwdriver accessories |
BS 64:1992
|
Specification for normal and high strength steel bolts and nuts for railway rail fishplates |
BS 4311-1:1993
|
Specification for gauge blocks and accessories New gauge blocks |
BS A 241:1973
|
General requirements for steel protruding-head bolts of tensile strength 1250 MPa (180000 lbf/in2) or greater |
BS 4395-2:1969
|
Specification for high strength friction grip bolts and associated nuts and washers for structural engineering Higher grade bolts and nuts and general grade washers |
BS SP 113:1954
|
Specification for cadmium plated close tolerance shear pins for aircraft |
BS 2HC 100:2010
|
Procedure for inspection, testing and acceptance of iron, nickel, copper, cobalt and refractory metal base alloy castings |
BS 1937:1953
|
Specification for engineers\' ratchet braces and drilling pillars |
BS 1968:1953
|
Specification for floats for ballvalves (copper) |
BS 2871-2:1972
|
Specification for copper and copper alloys. Tubes Tubes for general purposes |
BS 4A 100:2003
|
Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa |
BS A 274:1981
|
Specification for procurement of alloy steel bolts, metric, with a minimum tensile strength of 1100 MPa |
BS 6073-1:1981
|
Precast concrete masonry units Specification for precast concrete masonry units |
BS 6404-20:1996
|
Magnetic materials Resistance and temperature classification of insulation coatings |
BS 1434:1985
|
Specification for copper for electrical purposes: copper sections in bars, blanks and segments for commutators |
BS 4551-1:1998
|
Methods of testing mortars, screeds and plasters Physical testing |
DEFSTAN 03-14/2(1995) : 1995
|
ELECTRO-DEPOSITION OF CHROMIUM FOR ENGINEERING PURPOSES |
DEFSTAN 03-19/2(1994) : 1994
|
ELECTRO-DEPOSITION OF CADMIUM |
BS 115:1995
|
Specification for metallic resistance materials for electrical purposes |
BS 3A 100:1991
|
Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa |
BS 807:1955
|
Specification for spot welding electrodes |
BS 1924-2:1990
|
Stabilized materials for civil engineering purposes Methods of test for cement-stabilized and lime-stabilized materials |
BS SP115-117(1956) : 1956
|
SPECIFICATIONS FOR HYDRAULIC SURFACE-CHECK TYPE LUBRICATING NIPPLES FOR AIRCRAFT |
BS 2054:1953
|
Specification for augers and auger bits |
BS A260,A261,A262,A263,A264,A265(1976) : 1976 AMD 4065
|
SPECIFICATION FOR METRIC SCREWS |
DD ENV 1090-1:1998
|
Execution of steel structures General rules and rules for buildings (together with United Kingdom national application document) |
BS 1486-1:1959
|
Lubricating nipples Lubricating nipples and adaptors for use on machinery and vehicles |
BS 1098-2:1977
|
Specification for jig bushes Metric units |
BS 7586:1992
|
Specification for combination wrenches |
BS 7612:1993
|
Specification for non-circular steel wire for mechanical springs |
BS 1449-1.1:1991
|
Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip General specification |
DEFSTAN 03-20/2(1994) : 1994 AMD 1 1996
|
ELECTRO-DEPOSITION OF ZINC |
BS 2982:1992
|
Specification for materials and packaging of surgical scalpels with detachable blades |
BS 7448-4:1997
|
Fracture mechanics toughness tests Method for determination of fracture resistance curves and initiation values for stable crack extension in metallic materials |
BS 4464:1969
|
Specification for spring washers for general engineering and automobile purposes. Metric series |
BS 8010-3:1993
|
Code of practice for pipelines Pipelines subsea: design, construction and installation |
BS 2957:1958
|
Specification for fireman\'s axe with ash handle |
BS 5400-6:1999
|
STEEL, CONCRETE AND COMPOSITE BRIDGES - PART 6: SPECIFICATION FOR MATERIALS AND WORKMANSHIP, STEEL |