BS 4735:1974
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Laboratory method of test for assessment of the horizontal burning characteristics of specimens no larger than 150 mm x 50 mm x 13 mm (nominal) of cellular plastics and cellular rubber materials when subjected to a small flame
Hardcopy , PDF
06-03-2006
English
30-09-1974
Cooperating organizations
Foreword
Method
1. Scope
2. Reference
3. General
4. Apparatus
5. Size, number and marking of test specimens
6. Conditioning of specimens
7. Test procedure
8. Calculations
9. Test report
Figures
1. Test chamber
2. Details of flame and relative positions of burner
wing top, specimen and specimen support
3. Dimensions of specimen and specimen support
4. Gauze holder
Describes a small-scale laboratory procedure for use in controlling manufacturing processes to ensure consistency of production. This method should not be used to assess potential fire hazard in use.
Committee |
PRI/24
|
DocumentType |
Standard
|
Pages |
14
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
UNE-EN 62196-3:2014 | Identical |
05/30121972 DC : DRAFT JUL 2005 | BS 4841-2 - RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) PRODUCTS FOR BUILDING END-USE APPLICATIONS - PART 2: SPECIFICATION FOR LAMINATED INSULATION BOARDS FOR INTERNAL WALL LININGS AND CEILINGS |
BS 3837-1:1986 | Expanded polystyrene boards Specification for boards manufactured from expandable beads |
BS 4841-2:1975 | Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam for building applications Laminated board for use as a wall and ceiling insulation |
BS 6203:2003 | Guide to fire characteristics and fire performance of expanded polystyrene materials (EPS and XPS) used in building applications |
04/30115936 DC : DRAFT NOV 2004 | BS PL 9 - FIBROUS POLYAMIDE MATERIAL FOR USE AS AN EXPLOSION SUPPRESSANT AND AS A BAFFLE MATERIAL IN AIRCRAFT FUEL TANKS - TEST METHOD |
BS 1566-2:1984 | Copper indirect cylinders for domestic purposes Specification for single feed indirect cylinders |
05/30121961 DC : DRAFT JUL 2005 | BS 4841-3 - RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) PRODUCTS FOR BUILDING AND END-USE APPLICATIONS - PART 3: SPECIFICATION FOR LAMINATED INSULATION BOARDS (ROOFBOARDS) WITH AUTO-ADHESIVELY BONDED FACINGS FOR USE AS ROOFBOARD THERMAL INSULATION FOR BUILT-UP ROOFS UNDER BITUMENISED ROOFING MEMBRANES |
BS 5241-2:1991 | Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam when dispensed or sprayed on a construction site Specification for dispensed foam for thermal insulation or buoyancy applications |
I.S. EN ISO 5999:2013 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - POLYURETHANE FOAM FOR LOAD-BEARING APPLICATIONS EXCLUDING CARPET UNDERLAY - SPECIFICATION (ISO 5999:2013) |
UNI EN ISO 5999 : 2013 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - POLYURETHANE FOAM FOR LOAD-BEARING APPLICATIONS EXCLUDING CARPET UNDERLAY - SPECIFICATION |
BS 4841-1:1993 | Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam for building applications Specification for laminated board for general purposes |
BS 5608:1993 | Specification for preformed rigid polyurethane (PUR) and polyisocyanurate (PIR) foams for thermal insulation of pipework and equipment |
BS 5241-1:1994 | Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam when dispensed or sprayed on a construction site Specification for sprayed foam thermal insulation applied externally |
BS 7457:1994 | Specification for polyurethane (PUR) foam systems suitable for stabilization and thermal insulation of cavity walls with masonry or concrete inner and outer leaves |
BS 4841-3:1994 | Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam for building applications Specification for two types of laminated board (roofboards) with auto-adhesively bonded reinforcing facings for use as roofboard thermal insulation for built-up roofs |
BS 4840-2:1994 | Rigid polyurethane (PUR) foam in slab form Specification for PUR foam for use in refrigerator cabinets, cold rooms and stores |
BS 6586-1:1993 | Rigid polyurethane (PUR) foam produced by the press injection method Specification for PUR foam for insulated panels for transport containers and insulated vehicles bodies |
BS 3198:1981 | Specification for copper hot water storage combination units for domestic purposes |
05/30124175 DC : DRAFT JUL 2005 | BS 4841-4 - RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) PRODUCTS FOR BUILDING AND END-USE APPLICATIONS - PART 4: SPECIFICATION FOR LAMINATED INSULATION BOARDS (FLOORBOARDS) WITH AUTO-ADHESIVELY BONDED FACINGS FOR USE AS ROOFBOARD THERMAL INSULATION COVERED BY SINGLE-PLY NON-BITUMINISED ROOFING MEMBRANES |
BS PL 9:2005 | Fibrous polyamide material for use as an explosion suppressant and as a baffle material in aircraft fuel tanks. Test methods |
BS 3837-2:1990 | Expanded polystyrene boards Specification for extruded boards |
05/30124996 DC : DRAFT JUL 2005 | BS 4841-5 - RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) PRODUCTS FOR BUILDING END-USE APPLICATIONS - PART 5: SPECIFICATION FOR LAMINATED INSULATION BOARDS FOR PITCHED ROOFS |
05/30125016 DC : DRAFT JUL 2005 | BS 4841-6 - RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) PRODUCTS FOR BUILDING END-USE APPLICATIONS - PART 6: SPECIFICATION FOR LAMINATED INSULATION BOARDS FOR FLOORS |
BS EN ISO 5999:2013 | Flexible cellular polymeric materials. Polyurethane foam for load-bearing applications excluding carpet underlay. Specification |
ISO 5999:2013 | Flexible cellular polymeric materials — Polyurethane foam for load-bearing applications excluding carpet underlay — Specification |
EN ISO 5999:2013 | Flexible cellular polymeric materials - Polyurethane foam for load-bearing applications excluding carpet underlay - Specification (ISO 5999:2013) |
05/30121957 DC : DRAFT JUL 2005 | BS 4841-1 - RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) PRODUCTS FOR BUILDING END-USE APPLICATIONS - PART 1: SPECIFICATION FOR LAMINATED INSULATION BOARDS FOR WALL CAVITIES |
BS 5617:1985 | Specification for urea-formaldehyde (UF) foam systems suitable for thermal insulation of cavity walls with masonry or concrete inner and outer leaves |
BS 7523:1991 | Specification for preformed cellular polyethylene (PE) materials for the thermal insulation of pipework |
DEFSTAN 07-247(PT1)/3(2009) : 2009 | THE SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS - PART 1: SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS |
DEFSTAN 07-247(PT1)/2(2006) : 2006 | THE SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS - PART 1: SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS |
DEFSTAN 02-803(PT1)/1(2000) : 2000 | REQUIREMENTS FOR PLASTIC FOAM THERMAL INSULATION MATERIAL - PART 1: PLASTIC FOAM PRODUCTS, RIGID PLASTIC FOAM INSULATION SLABS, CUT AND MOULDED SECTIONS |
DIN EN ISO 5999:2013-12 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - POLYURETHANE FOAM FOR LOAD-BEARING APPLICATIONS EXCLUDING CARPET UNDERLAY - SPECIFICATION (ISO 5999:2013) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.