BS EN 10088-1:2014
|
Stainless steels List of stainless steels |
BS 970-2:1988
|
Specification for wrought steels for mechanical and allied engineering purposes Requirements for steels for the manufacture of hot formed springs |
BS 3923-1:1986
|
Methods for ultrasonic examination of welds Methods for manual examination of fusion welds in ferritic steels |
BS EN ISO 6507-3:2005
|
Metallic materials. Vickers hardness test Calibration of reference blocks |
BS EN 24033:1992
|
Hexagon nuts, style 2. Product grades A and B |
BS EN 10088-3:2014
|
Stainless steels Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
BS 7644-2:1993
|
Direct tension indicators Specification for nut face and bolt face washers |
BS EN 24018:1992
|
Hexagon head screws. Product grade C |
BS EN ISO 6507-1:2005
|
Metallic materials. Vickers hardness test Test method |
BS 4604-1:1970
|
SPECIFICATION FOR THE USE OF HIGH STRENGTH FRICTION GRIP BOLTS IN STRUCTURAL STEELWORK METRIC SERIES - PART 1: GENERAL GRADE |
BS EN 288-2:1992
|
Specification and approval of welding procedures for metallic materials Welding procedures specification for arc welding |
BS 4395-1:1969
|
Specification for high strength friction grip bolts and associated nuts and washers for structural engineering General grade |
BS EN 895:1995
|
Destructive tests on welds in metallic materials. Transverse tensile test |
BS EN 875:1995
|
Destructive tests on welds in metallic materials. Impact tests. Test specimen location, notch orientation and examination |
BS 5135:1984
|
Specification for arc welding of carbon and carbon manganese steels |
BS EN 10025:1993
|
Hot rolled products of non-alloy structural steels. Technical delivery conditions |
BS EN 1563:2011
|
Founding. Spheroidal graphite cast irons |
BS EN 10113-3:1993
|
Hot-rolled products in weldable fine grain structural steels Delivery conditions for thermomechanical rolled steels |
BS 29:1976
|
Specification for carbon steel forgings above 150 mm ruling section |
BS EN 10088-2:2014
|
Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
BS EN 1435:1997
|
Non-destructive examination of welds. Radiographic examination of welded joints |
BS EN 970:1997
|
Non-destructive examination of fusion welds. Visual examination |
BS EN 10155:1993
|
Structural steels with improved atmospheric corrosion resistance. Technical delivery conditions |
BS EN 10210-1:2006
|
Hot finished structural hollow sections of non-alloy and fine grain steels Technical delivery requirements |
BS EN 10113-1:1993
|
Hot-rolled products in weldable fine grain structural steels General delivery conditions |
BS 970-4:1970
|
Specification for wrought steels for mechanical and allied engineering purposes Valve steels |
BS EN 24034:1992
|
Hexagon nuts. Product grade C |
BS 4190:1967
|
Specification for ISO metric black hexagon bolts, screws and nuts |
BS 7644-1:1993
|
Direct tension indicators. Specification for compressible washers |
BS 5400-3:1982
|
Steel, concrete and composite bridges Code of practice for design of steel bridges |
BS 6072:1981
|
Method for magnetic particle flaw detection |
BS 4604-2:1970
|
SPECIFICATION FOR THE USE OF HIGH STRENGTH FRICTION GRIP BOLTS IN STRUCTURAL STEELWORK - METRIC SERIES - HIGHER GRADE (PARALLEL SHANK) |
BS EN 24016:1992
|
Hexagon head bolts. Product grade C |
BS EN 10137-2:1996
|
Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions Delivery conditions for quenched and tempered steels |
BS EN 24017:1992
|
Hexagon head screws. Product grades A and B |
BS EN 10029:2010
|
Hot-rolled steel plates 3 mm thick or above. Tolerances on dimensions and shape |
BS EN ISO 6507-2:2005
|
Metallic materials. Vickers hardness test Verification and calibration of testing machines |
BS 4933:1973
|
Specification for ISO metric black cup and countersunk head bolts and screws with hexagon nuts |
BS 7668:1994
|
Specification for weldable structural steels. Hot finished structural hollow sections in weather resistant steels |
BS EN 288-3:1992
|
Specification and approval of welding procedures for metallic materials Welding procedure tests for the arc welding of steels |
BS EN 1561:2011
|
Founding. Grey cast irons |
BS EN 24014:1992
|
Hexagon head bolts. Product grades A and B |
BS EN 1562:2012
|
Founding. Malleable cast irons |
BS 4395-2:1969
|
Specification for high strength friction grip bolts and associated nuts and washers for structural engineering Higher grade bolts and nuts and general grade washers |
BS 4620:1970
|
Specification for rivets for general engineering purposes |
BS EN 10034:1993
|
Structural steel I and H sections. Tolerances on shape and dimensions |
BS EN 24032:1992
|
Hexagon nuts, style 1. Product grades A and B |
BS 5400-10(1980) : 1980
|
STEEL CONCRETE AND COMPOSITE BRIDGES - PART 10: CODE OF PRACTICE FOR FATIGUE |
BS 427:1990
|
Method for Vickers hardness test and for verification of Vickers hardness testing machines |
BS EN 10083-1:2006
|
Steels for quenching and tempering General technical delivery conditions |
BS EN 10113-2:1993
|
Hot-rolled products in weldable fine grain structural steels Delivery conditions for normalized/normalized rolled steels |
BS 7419:1991
|
Specification for holding down bolts |
BS EN 10137-3:1996
|
Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions Delivery conditions for precipitation hardened steels |
BS EN 10137-1:1996
|
Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions General delivery conditions |
BS EN 10056-2:1993
|
Specification for structural steel equal and unequal angles Tolerances on shape and dimensions |
BS EN 910:1996
|
Destructive tests on welds in metallic materials. Bend tests |
BS 4320:1968
|
Specification for metal washers for general engineering purposes. Metric series |
BS EN 288-1:1992
|
Specification and approval of welding procedures for metallic materials General rules for fusion welding |
BS EN 10204:2004
|
Metallic products. Types of inspection documents |