BS EN 1015-11:1999
|
Methods of test for mortar for masonry Determination of flexural and compressive strength of hardened mortar |
BS EN 771-5 : 2011
|
SPECIFICATION FOR MASONRY UNITS - PART 5: MANUFACTURED STONE MASONRY UNITS |
BS EN 10088-1:2014
|
Stainless steels List of stainless steels |
BS EN 12878:2014
|
Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test |
BS EN 771-3 : 2011
|
SPECIFICATION FOR MASONRY UNITS - PART 3: AGGREGATE CONCRETE MASONRY UNITS (DENSE AND LIGHTWEIGHT AGGREGATES) |
BS EN 772-11:2000
|
Methods of test for masonry units Determination of water absorption of aggregate concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units |
BS 4483:2005
|
Steel fabric for the reinforcement of concrete. Specification |
BS DD86-1(1983) : 1983
|
DAMP-PROOF COURSES - METHODS OF TEST FOR FLEXURAL BOND STRENGTH AND SHORT TERM SHEAR STRENGTH |
BS EN 846-2:2000
|
Methods of test for ancillary components for masonry Determination of bond strength of prefabricated bed joint reinforcement in mortar joints |
BS EN 772-1 : 2011
|
METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH |
BS 8500-2:2002
|
Concrete. Complementary British Standard to BS EN 206-1 Specification for constituent materials and concrete |
BS EN 771-4 : 2011
|
SPECIFICATION FOR MASONRY UNITS - PART 4: AUTOCLAVED AERATED CONCRETE MASONRY UNITS |
BS EN 12390-3:2009
|
Testing hardened concrete Compressive strength of test specimens |
BS 4486:1980
|
Specification for hot rolled and hot rolled and processed high tensile alloy steel bars for the prestressing of concrete |
BS DD86-2(1984) : 1984
|
DAMP-PROOF COURSES - METHOD OF TEST FOR CREEP DEFORMATION |
BS EN 1052-4:2000
|
Methods of test for masonry Determination of shear strength including damp proof course |
BS EN 1015-2:1999
|
Methods of test for mortar for masonry Bulk sampling of mortars and preparation of test mortars |
BS 6399-3(1988) : 1988
|
LOADING FOR BUILDINGS - PART 3: CODE OF PRACTICE FOR IMPOSED ROOF LOADS |
BS EN 10025-1:2004
|
Hot rolled products of structural steels General technical delivery conditions |
BS EN 934-3 : 2009
|
ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 3: ADMIXTURES FOR MASONRY MORTAR - DEFINITIONS, REQUIREMENTS, CONFORMITY AND MARKING AND LABELLING |
BS EN 845-3 : 2013
|
SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 3: BED JOINT REINFORCEMENT OF STEEL ESHWORK |
BS EN 1052-1:1999
|
Methods of test for masonry Determination of compressive strength |
BS EN 450-1:2012
|
Fly ash for concrete Definition, specifications and conformity criteria |
BS 410-1:2000
|
Test sieves. Technical requirements and testing Test sieves of metal wire cloth |
BS 8110-2:1985
|
STRUCTURAL USE OF CONCRETE - PART 2: CODE OF PRACTICE FOR SPECIAL CIRCUMSTANCES |
BS 5896:1980
|
Specification for high tensile steel wire and strand for the prestressing of concrete |
BS EN 771-2 : 2011
|
SPECIFICATION FOR MASONRY UNITS - PART 2: CALCIUM SILICATE MASONRY UNITS |
BS EN 197-1:2011
|
Cement Composition, specifications and conformity criteria for common cements |
BS EN ISO 1461:2009
|
Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods |
BS 410-2:2000
|
Test sieves. Technical requirements and testing Test sieves of perforated metal plate |
BS 8215:1991
|
Code of practice for design and installation of damp-proof courses in masonry construction |
BS 4729(2005) : 2005
|
CLAY BRICKS OF SPECIAL SHAPES AND SIZES - RECOMMENDATIONS |
BS 4449:1997
|
Specification for carbon steel bars for the reinforcement of concrete |
BS EN 772-16:2011
|
Methods of test for masonry units Determination of dimensions |
BS 8500-1:2002
|
Concrete. Complementary British Standard to BS EN 206-1 Method of specifying and guidance for the specifier |
BS EN 13877-3:2004
|
Concrete pavements Specifications for dowels to be used in concrete pavements |
BS 8102:1990
|
Code of practice for protection of structures against water from the ground |
BS EN 772-2:1998
|
Methods of test for masonry units Determination of percentage area of voids in masonry units (by paper indentation) |
BS EN 12350-2:2000
|
Testing fresh concrete Slump test |
BS 8666:2005
|
Scheduling, dimensioning, bending and cutting of steel reinforcement for concrete. Specification |
BS EN 845-1 : 2013
|
SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS |
BS 4887-1:1986
|
Mortar admixtures Specification for air-entraining (plasticizing) admixtures |
BS 5502-22(2003) : 2003
|
BUILDINGS AND STRUCTURES FOR AGRICULTURE - PART 22: CODE OF PRACTICE FOR DESIGN, CONSTRUCTION AND LOADING |
BS 8002:1994
|
Code of practice for earth retaining structures |
BS 4027:1996
|
Specification for sulfate-resisting Portland cement |
BS DD86-3(1990) : 1990
|
DAMP-PROOF COURSES - GUIDE TO CHARACTERISTIC STRENGTHS OF DAMP-PROOF COURSE MATERIAL USED IN MASONRY |
BS 6744(2001) : 2001
|
STAINLESS STEEL BARS FOR THE REINFORCEMENT OF AND USE IN CONCRETE - REQUIREMENTS AND TEST METHODS |
BS EN 771-1 : 2011
|
SPECIFICATION FOR MASONRY UNITS - PART 1: CLAY MASONRY UNITS |
BS 7979:2001
|
Specification for limestone fines for use with Portland cement |
BS 6399-1:1996
|
LOADING FOR BUILDINGS - PART 1: CODE OF PRACTICE FOR DEAD AND IMPOSED LOADS |
BS EN 771-6 : 2011
|
SPECIFICATION FOR MASONRY UNITS - PART 6: NATURAL STONE MASONRY UNITS |