![header thumbnail](/images/publishers\bsi_cover.gif)
BS 5975(2008) : 2008
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
![header thumbnail](/images/publishers\bsi_cover.gif)
CODE OF PRACTICE FOR TEMPORARY WORKS PROCEDURES AND THE PERMISSIBLE STRESS DESIGN OF FALSEWORK
Hardcopy , PDF
30-05-2019
English
01-01-2008
Foreword
Section 1: General
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviations and symbols
5 Legislation
Section 2: Procedural control of temporary works
6 Procedures
7 Appointment of the temporary works co-ordinator
and the temporary works supervisor
8 Design brief
9 Design
10 Co-ordination and supervision of work on site
11 Checking on site
12 Alterations
13 Loading (bringing) the temporary works (into service)
14 Dismantling
Section 3: Falsework
15 General
16 Materials
17 Loads applied to falsework
18 Foundations and ground conditions
19 Design of falsework
20 Work on site
Annexes
Annex A (normative) - Permissible stresses and
modulus of elasticity for steel grades
generally used in falsework
Annex B (normative) - Properties of components
in tube and coupler falsework
Annex C (normative) - Initial testing, quality control
and inspection of falsework equipment
Annex D (normative) - Data on material properties
Annex E (normative) - Wave forces
Annex F (normative) - Site investigations for foundations
for falseworks
Annex G (informative) - Examples of design brief contents
Annex H (informative) - Forces from concrete on sloping
soffits
Annex J (normative) - Design of steel beams at points of
reaction or concentrated loads
Annex K (normative) - Effective lengths of steel members
in compression
Annex L (informative) - Wind calculations for falsework
Annex M (normative) - Shielding factor eta for unclad
falsework
Bibliography
Index
Provides recommendations and guidance on the procedural controls to be applied to all aspects of temporary works in the construction industry.
Committee |
B/514/26
|
DevelopmentNote |
Supersedes BS 5975(1996) & 07/30150912 DC. (01/2009) 2008 Edition Re-Issued in October 2011 and incorporates AMD 1 2011. Supersedes 11/30240689 DC. (10/2011)
|
DocumentType |
Standard
|
Pages |
228
|
PublisherName |
British Standards Institution
|
Status |
Withdrawn
|
Supersedes |
BS EN 12812:2008 | Falsework. Performance requirements and general design |
BS 5950-3.1(1990) : 1990 | STRUCTURAL USE OF STEELWORK IN BUILDING - PART 3: DESIGN IN COMPOSITE CONSTRUCTION - SECTION 3.1: CODE OF PRACTICE FOR DESIGN OF SIMPLE AND CONTINUOUS COMPOSITE BEAMS |
EN 12812:2008 | Falsework - Performance requirements and general design |
BS 7212:2016 | Code of practice for the safe use of construction hoists |
CSA S269.1 : 2016 | FALSEWORK AND FORMWORK |
BS 8002:2015 | Code of practice for earth retaining structures |
BS 8437(2005) : 2005 | CODE OF PRACTICE FOR SELECTION, USE AND MAINTENANCE OF PERSONAL FALL PROTECTION SYSTEMS AND EQUIPMENT FOR USE IN THE WORKPLACE |
BS 7121-1:2016 | Code of practice for safe use of cranes General |
BS 6164:2011 | Code of practice for health and safety in tunnelling in the construction industry |
BS 7981:2017 | Code of practice for the installation, maintenance, thorough examination and safe use of mast climbing work platforms (MCWPs) |
BS 7985:2009 | Code of practice for the use of rope access methods for industrial purposes |
BS 7121-2-5:2012 | Code of practice for the safe use of cranes Inspection, maintenance and thorough examination. Tower cranes |
BS 7985:2013 | Code of practice for the use of rope access methods for industrial purposes. Recommendations and guidance supplementary to BS ISO 22846 |
BS 5607:2017 | Code of practice for the safe use of explosives in the construction industry |
BS 8004:2015 | Code of practice for foundations |
BS 6187:2011 | Code of practice for full and partial demolition |
BS EN 1313-2:1999 | Round and sawn timber. Permitted deviations and preferred sizes Hardwood sawn timber |
BS 8004:1986 | Code of practice for foundations |
BS 8118-2(1991) : 1991 | STRUCTURAL USE OF ALUMINIUM - PART 2: SPECIFICATION FOR MATERIALS, WORKMANSHIP AND PROTECTION |
BS 1139-1:1982 | Metal scaffolding Specification for tubes for use in scaffolding |
BS 1139-2.2:1991 | Metal scaffolding. Couplers Specification for steel and aluminium couplers, fittings and accessories for use in tubular scaffolding |
BS 8118-1:1991 | Structural use of aluminium Code of practice for design |
BS 1881-116:1983 | Testing concrete Method for determination of compressive strength of concrete cubes |
BS EN 39:2001 | Loose steel tubes for tube and coupler scaffolds. Technical delivery conditions |
BS 1377-7:1990 | Methods of test for soils for civil engineering purposes Shear strength tests (total stress) |
BS 1881-120:1983 | Testing concrete Method for determination of the compressive strength of concrete cores |
BS 1377-6:1990 | Methods of test for soils for civil engineering purposes Consolidation and permeability tests in hydraulic cells and with pore pressure measurement |
BS 4604-1:1970 | SPECIFICATION FOR THE USE OF HIGH STRENGTH FRICTION GRIP BOLTS IN STRUCTURAL STEELWORK METRIC SERIES - PART 1: GENERAL GRADE |
BS EN 74-1:2005 | Couplers, spigot pins and baseplates for use in falsework and scaffolds Part 1: Couplers for tubes. Requirements and test procedures |
BS EN 74-2:2008 | Couplers, spigot pins and baseplates for use in falsework and scaffolds Special couplers. Requirements and test procedures |
BS EN 10025-2:2004 | Hot rolled products of structural steels Technical delivery conditions for non-alloy structural steels |
BS 8110-3(1985) : 1985 | STRUCTURAL USE OF CONCRETE - PART 3: DESIGN CHARTS FOR SINGLY REINFORCED BEAMS, DOUBLY REINFORCED BEAMS AND RECTANGULAR COLUMNS |
BS 8110-2:1985 | STRUCTURAL USE OF CONCRETE - PART 2: CODE OF PRACTICE FOR SPECIAL CIRCUMSTANCES |
BS EN 1992-1-1 : 2004 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
BS 1377-9:1990 | Methods for test for soils for civil engineering purposes In-situ tests |
BS 1377-5:1990 | Methods of test for soils for civil engineering purposes Compressibility, permeability and durability tests |
BS CP3:CH5-2(1972) : AMD 7908 | CODE OF BASIC DATA FOR THE DESIGN OF BUILDINGS - LOADING - WIND LOADS |
BS EN 1993-1-1 : 2005 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
BS EN 12811-1:2003 | Temporary works equipment Scaffolds. Performance requirements and general design |
BS 5507-1:1977 | Methods of test for falsework equipment Floor centres |
BS 1377-3:1990 | Methods of test for soils for civil engineering purposes Chemical and electro-chemical tests |
BS EN 12813:2004 | Temporary works equipment. Load bearing towers of prefabricated components. Particular methods of structural design |
BS EN 1991-1-1:2002 | Eurocode 1. Actions on structures General actions - Densities, self-weight, imposed loads for buildings |
BS 4604-2:1970 | SPECIFICATION FOR THE USE OF HIGH STRENGTH FRICTION GRIP BOLTS IN STRUCTURAL STEELWORK - METRIC SERIES - HIGHER GRADE (PARALLEL SHANK) |
BS EN 13377:2002 | Prefabricated timber formwork beams. Requirements, classification and assessment |
BS EN 1991-1-4 : 2005 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS |
BS 4074:1982 | Specification for metal props and struts |
BS 5756(2007) : 2007 | VISUAL STRENGTH GRADING OF TEMPERATE HARDWOOD - SPECIFICATION |
BS 4978:1996 | Specification for visual strength grading of softwood |
BS 1881-117:1983 | Testing concrete Method for determination of tensile splitting strength |
BS 1377-4:1990 | Methods of test for soils for civil engineering purposes Compaction-related tests |
PD 6688-1-4:2009 | Background information to the National Annex to BS EN 1991-1-4 and additional guidance |
BS 6349-7:1991 | Maritime structures Guide to the design and construction of breakwaters |
BS EN 1011-2:2001 | Welding. Recommendations for welding of metallic materials Arc welding of ferritic steels |
BS 5507-3:1982 | Methods of test for falsework equipment Props |
BS 1881-119:1983 | Testing concrete Method for determination of compressive strength using portions of beams broken in flexure (equivalent cube method) |
BS 648:1964 | Schedule of weights of building materials |
BS 1881-118:1983 | Testing concrete Method for determination of flexural strength |
BS EN 1313-1:2010 | Round and sawn timber. Permitted deviations and preferred sizes Softwood sawn timber |
BS EN 14081-1:2016 | Timber structures. Strength graded structural timber with rectangular cross section General requirements |
BS 1377-8:1990 | Methods of test for soils for civil engineering purposes Shear strength tests (effective stress) |
BS EN 1065:1999 | Adjustable telescopic steel props. Product specifications, design and assessment by calculation and tests |
BS 1377-2:1990 | Methods of test for soils for civil engineering purposes Classification tests |
BS EN 12812:2008 | Falsework. Performance requirements and general design |
BS 8002:1994 | Code of practice for earth retaining structures |
BS EN 1991-1-3 : 2003 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-3: GENERAL ACTIONS - SNOW LOADS |
BS 449-2:1969 | Specification for the use of structural steel in building Metric units |
BS 6399-1:1996 | LOADING FOR BUILDINGS - PART 1: CODE OF PRACTICE FOR DEAD AND IMPOSED LOADS |
BS EN 1991-1-4 NA : 2005 | UK NATIONAL ANNEX TO EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS |
BS EN 1011-1:2009 | Welding. Recommendations for welding of metallic materials General guidance for arc welding |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.