BS 6068-2.37:1990
Current
The latest, up-to-date edition.
Water quality. Physical, chemical and biochemical methods Method for the determination of chloride via a silver nitrate titration with chromate indicator (Mohr\'s method)
Hardcopy , PDF
English
30-09-1990
Important note : Users cannot be edited or removed once added to your Multi user PDF.NO CONTENTS SECTION
Applicable to waters that are not heavily polluted and of low chloride content. For chloride concentrations from 5 mg/l to 150 mg/l.
| Committee |
EH/3/2
|
| DevelopmentNote |
Supersedes 88/50947 DC and BS 2690-6(1968) Also numbered as ISO 9297. (11/2003) Reviewed and confirmed by BSI, November, 2004. (11/2004)
|
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
1.1 Application range
This International Standard specifies a titration method for the determination of dissolved chloride in water. The method is applicable to the direct determination of dissolved chloride in concentrations between 5 mg/l and 150 mg/l. The working range may be extended to 400 mg/l by using a burette of larger capacity or by sample dilution. Due to many interferences the method is not applicable to heavily polluted waters of low chloride content.
1.2 Interferences
Normal concentrations of common constituents of ground water, surface water and potable water do not interfere with the determination.
The following substances interfere with the method
- Substances forming insoluble silver compounds, such as bromides, iodides, sulfides, cyanides, hexacyanoferrates(II) and hexacyanoferrates(III). If necessary, bromide and iodide ions shall be determined separately, and the result of the chloride determination corrected accordingly.
- Compounds forming complexes with silver ions, such as ammonium and thiosulfate ions.
- Compounds which will reduce chromate ions, including iron(II) and sulfite ions.
The interferences mentioned above will lead to high chloride values.
Highly coloured or turbid solutions may obscure the end point, for example hydrated iron oxide.
| BS 1427:1993 | Guide to field and on-site test methods for the analysis of waters |
| BS 1427:2009 | Guide to on-site test methods for the analysis of waters |
| BS 4060:2006 | Pressed wool felts. Specification |
| 14/30291598 DC : 0 | BS 8500-2 - CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206 - PART 2: SPECIFICATION FOR CONSTITUENT MATERIALS AND CONCRETE |
| BS 8500-2(2015) : 2015 | CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206 - PART 2: SPECIFICATION FOR CONSTITUENT MATERIALS AND CONCRETE |
| BS 8500-2:2002 | Concrete. Complementary British Standard to BS EN 206-1 Specification for constituent materials and concrete |
| BS 8500-2(2006) : 2006 | CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206-1 - PART 2: SPECIFICATION FOR CONSTITUENT MATERIALS AND CONCRETE |
| BS 6068-6.3(1986) : 1986 | WATER QUALITY - SAMPLING - GUIDANCE ON THE PRESERVATION AND HANDLING OF SAMPLES |
| ISO 5667-2:1991 | Water quality Sampling Part 2: Guidance on sampling techniques |
| ISO 5667-3:2012 | Water quality Sampling Part 3: Preservation and handling of water samples |
| ISO 385-1:1984 | Laboratory glassware — Burettes — Part 1: General requirements |
| BS 6068-6.1(1981) : AMD 7435 | WATER QUALITY - SAMPLING - GUIDANCE ON THE DESIGN OF SAMPLING PROGRAMMES |
| ISO 5667-1:2006 | Water quality Sampling Part 1: Guidance on the design of sampling programmes and sampling techniques |
| BS 846:1985 | Specification for burettes |
| ISO 5725:1986 | Precision of test methods Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests |
| BS 6068-6.2(1983) : 1983 | WATER QUALITY - SAMPLING - GUIDANCE ON SAMPLING TECHNIQUES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.