BS 6644(2005) : 2005
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
SPECIFICATION FOR INSTALLATION OF GAS-FIRED HOT WATER BOILERS OF RATED INPUTS BETWEEN 70 KW (NET) AND 1.8 MW (NET) (2ND AND 3RD FAMILY GASES)
Hardcopy , PDF
30-11-2011
English
01-01-2005
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Committees responsible
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Competence and design considerations
5 Selection of boiler, materials and components
6 Installation
7 Inspection, commissioning and servicing
Annex A (Informative) - Basis for the provision of combustion
and cooling air to boiler houses and rooms in which
commercial boilers are installed in accordance with
this standard
Annex B (Informative) - Fan diluted flues
Annex C (Informative) - Checks to be carried out on the boiler
prior to commissioning
Annex D (Informative) - Typical live run checks
Annex E (Normative) - Combustion products analysis
Annex F (Informative) - Best practice guide to the dispersion of
combustion products
Bibliography
Describes requirements for the installation, including design, inspection and commissioning, of gas-fired hot water boilers of net rated heat inputs exceeding 70 kW but not exceeding a net heat input of 1.8 MW.
| Committee |
GSE/30
|
| DevelopmentNote |
Supersedes BS 6644(1991) and 03/310868 DC. (07/2005) 2005 Edition Re-Issued in November 2008 & incorporates AMD 1 2008. Supersedes 08/30159370 DC. (12/2008)
|
| DocumentType |
Standard
|
| Pages |
52
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| BS EN 656:2000 | Gas-fired central heating boilers. Type B boilers of nominal heat input exceeding 70 kW, but not exceeding 300 kW |
| BS EN 437 : 2003 | TEST GASES - TEST PRESSURES - APPLIANCE CATEGORIES |
| BS EN 294:1992 | Safety of machinery. Safety distances to prevent danger zones being reached by the upper limbs |
| BS EN ISO 10380:2012 | Pipework. Corrugated metal hoses and hose assemblies |
| BS EN 676 : 2003 | AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| BS 6448:1995 | Specification for gas appliance governors of DN greater than 50 and for inlet pressures up to 200 mbar |
| BS EN 13502:2002 | Chimneys. Requirements and test methods for clay/ceramic flue terminals |
| BS 6282-1:1982 | Devices with moving parts for the prevention of contamination of water by backflow Specification for check valves of nominal size up to and including DN 54 |
| BS 5854:1980 | Code of practice for flues and flue structures in buildings |
| BS 7927:1998 | Heating appliances for domestic applications. Portable apparatus designed to detect and measure specific combustion flue gas products. Requirements |
| BS 6700:1997 | Specification for design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages |
| BS EN 61779-4:2000 | Electrical apparatus for the detection and measurement of flammable gases Performance requirements for group II apparatus indicating a volume fraction up to 100% lower explosive limit |
| BS EN 13077:2008 | Devices to prevent pollution by backflow of potable water. Air gap with non-circular overflow (unrestricted). Family A. Type B |
| BS 6880-2:1988 | Code of practice for low temperature hot water heating systems of output greater than 45 kW Selection of equipment |
| BS EN 303-1:2017 | Heating boilers Heating boilers with forced draught burners. Terminology, general requirements, testing and marking |
| BS EN 13384-1 : 2002 | CHIMNEYS - THERMAL AND FLUID DYNAMIC CALCULATION METHODS - PART 1: CHIMNEYS SERVING ONE HEATING APPLIANCE |
| BS EN 13084-4:2005 | Free-standing chimneys Brick liners. Design and execution |
| BS 6880-1:1988 | Code of practice for low temperature hot water heating systems of output greater than 45 kW Fundamental and design considerations |
| BS 1212-2:1990 | Float operated valves Specification for diaphragm type float operated valves (copper alloy body) (excluding floats) |
| BS 7671(2008) : 2008 | REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS |
| BS EN 13084-1:2007 | Free-standing chimneys General requirements |
| BS EN 60079-10:2003 | Electrical apparatus for explosive gas atmospheres Classification of hazardous areas |
| BS EN 13076:2003 | Devices to prevent pollution by backflow of potable water. Unrestricted air gap. Family A. Type A |
| BS 1387:1985 | Specification for screwed and socketed steel tubes and tubulars and for plain end steel tubes suitable for welding or for screwing to BS 21 pipe threads |
| BS 5885-2:1987 | Automatic gas burners Specification for packaged burners with input rating 7.5 kW up to but excluding 60 kW |
| BS 5588-0:1996 | Fire precautions in the design, construction and use of buildings Guide to fire safety codes of practice for particular premises/applications |
| BS EN 88:1991 | Pressure governors for gas appliances for inlet pressures up to 200 mbar |
| BS EN 1443:2003 | Chimneys. General requirements |
| BS EN 677:1998 | Gas-fired central heating boilers. Specific requirements for condensing boilers with a nominal heat input not exceeding 70 kW |
| BS EN 13084-2:2007 | Free-standing chimneys Concrete chimneys |
| BS EN 61779-5:2000 | Electrical apparatus for the detection and measurement of flammable gases Performance requirements for group II apparatus indicating a volume fraction up to 100% gas |
| BS EN 1856-1:2009 | Chimneys. Requirements for metal chimneys System chimney products |
| BS EN 483 : 2000 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW |
| BS EN 1567 : 2000 | BUILDING VALVES - WATER PRESSURE REDUCING VALVES AND COMBINATION WATER REDUCING VALVES - REQUIREMENTS AND TESTS |
| BS EN 297:1994 | Gas-fired central heating boilers. Type B<sub>11</sub> and B<sub>11BS</sub> boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW |
| BS EN 1856-2:2009 | Chimneys. Requirements for metal chimneys Metal flue liners and connecting flue pipes |
| BS 5588-1:1990 | Fire precautions in the design, construction and use of buildings Code of practice for residential buildings |
| BS EN ISO 4126-1 : 2013 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 1: SAFETY VALVES (ISO 4126-1:2013) |
| BS EN 303-3:1999 | Heating boilers Gas-fired central heating boilers. Assembly comprising a boiler body and a forced draught burner |
| BS 5422:2001 | Method for specifying thermal insulating materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature range -40°C to +700°C |
| 1990/396/EEC : 1990 | COUNCIL DIRECTIVE OF 29 JUNE 1990 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO APPLIANCES BURNING GASEOUS FUELS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.