BS CP312-1(1973) : 1973
|
CODE OF PRACTICE FOR PLASTICS PIPEWORK (THERMOPLASTICS MATERIAL) - GENERAL PRINCIPLES AND CHOICE OF MATERIAL |
BS 5493:1977
|
Code of practice for protective coating of iron and steel structures against corrosion |
BS EN 200:2008
|
Sanitary tapware. Single taps and combination taps for water supply systems of type 1 and type 2. General technical specification |
BS EN 10312:2002
|
Welded stainless steel tubes for the conveyance of aqueous liquids inclu ding water for human consumption. Technical delivery conditions |
BS 5615:1985
|
Specification for insulating jackets for domestic hot water storage cylinders |
BS 1212-4:1991
|
Float operated valves Specification for compact type float operated valves for WC flushing cisterns (including floats) |
BS 1566-2:1984
|
Copper indirect cylinders for domestic purposes Specification for single feed indirect cylinders |
BS 6282-1:1982
|
Devices with moving parts for the prevention of contamination of water by backflow Specification for check valves of nominal size up to and including DN 54 |
BS EN 378-1:2016
|
Refrigerating systems and heat pumps. Safety and environmental requirements Basic requirements, definitions, classification and selection criteria |
BS 1710:1984
|
Specification for identification of pipelines and services |
BS 4991:1974
|
Specification for propylene copolymer pressure pipe |
BS 2456:1990
|
Specification for floats (plastics) for float operated valves for cold water services |
BS 8000-15:1990
|
Workmanship on building sites Code of practice for hot and cold water services (domestic scale) |
BS CP312-3(1973) : 1973
|
CODE OF PRACTICE FOR PLASTICS PIPEWORK (THERMOPLASTICS MATERIAL) - POLYETHYLENE PIPES FOR THE CONVEYANCE OF LIQUIDS UNDER PRESSURE |
BS 7977-2:2003
|
Specification for safety and rational use of energy of domestic gas appliances Combined appliances. Gas fire/back boiler |
BS EN 13077:2008
|
Devices to prevent pollution by backflow of potable water. Air gap with non-circular overflow (unrestricted). Family A. Type B |
BS EN 1717 : 2001
|
PROTECTION AGAINST POLLUTION OF POTABLE WATER IN WATER INSTALLATIONS AND GENERAL REQUIREMENTS OF DEVICES TO PREVENT POLLUTION BY BACKFLOW |
BS EN 257:2010
|
Mechanical thermostats for gas-burning appliances |
BS EN 1491:2000
|
Building valves. Expansion valves. Tests and requirements |
BS EN 681-1:1996
|
Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Vulcanized rubber |
BS EN 60335-2-21 : 2003
|
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-21: PARTICULAR REQUIREMENTS FOR STORAGE WATER HEATERS |
DD ENV 12977-1:2001
|
Thermal solar systems and components. Custom built systems General requirements |
BS 7291-2:2006
|
Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings Specification for polybutylene (PB) pipes and associated fittings |
BS EN 816:2017
|
Sanitary tapware. Automatic shut-off valves PN 10 |
BS EN 997 : 2012
|
WC PANS AND WC SUITES WITH INTEGRAL TRAP |
BS 6465-1(2006) : 2006
|
SANITARY INSTALLATIONS - PART 1: CODE OF PRACTICE FOR THE DESIGN OF SANITARY FACILITIES AND SCALES OF PROVISION OF SANITARY AND ASSOCIATED APPLIANCES |
BS EN 1490:2000
|
Building valves. Combined temperature and pressure relief valves. Tests and requirements |
BS EN 14154-1 : 2005
|
WATER METERS - PART 1: GENERAL REQUIREMENTS |
BS 1968:1953
|
Specification for floats for ballvalves (copper) |
BS 6340-4:1984
|
Shower units Specification for shower heads and related equipment |
BS 1212-2:1990
|
Float operated valves Specification for diaphragm type float operated valves (copper alloy body) (excluding floats) |
BS 7671(2008) : 2008
|
REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS |
BS EN 1057 : 2006
|
COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR WATER AND GAS IN SANITARY AND HEATING APPLICATIONS |
BS EN 1044:1999
|
Brazing. Filler metals |
BS EN 1452-2 : 2000
|
PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: PIPES |
BS EN 12976-1:2017
|
Thermal solar systems and components. Factory made systems General requirements |
BS 1566-1(2002) : 2002
|
COPPER INDIRECT CYLINDERS FOR DOMESTIC PURPOSES - PART 1: OPEN VENTED COPPER CYLINDERS - REQUIREMENTS AND TEST METHODS |
BS EN 246:2003
|
Sanitary tapware. General specifications for flow rate regulators |
BS 4346-1:1969
|
Joints and fittings for use with unplasticized PVC pressure pipes Injection moulded unplasticized PVC fittings for solvent welding for use with pressure pipes, including potable water supply |
BS EN 969:2009
|
Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods |
BS EN 29453:1994
|
Soft solder alloys. Chemical compositions and forms |
BS 2580:1979
|
Specification for underground plug cocks for cold water services |
BS EN 806-3:2006
|
Specifications for installations inside buildings conveying water for human consumption Pipe sizing. Simplified method |
BS 5391-1:2006
|
Acrylonitrile-butadiene-styrene (ABS) pressure pipe Specification |
BS EN 13076:2003
|
Devices to prevent pollution by backflow of potable water. Unrestricted air gap. Family A. Type A |
BS 6282-4:1982
|
Devices with moving parts for the prevention of contamination of water by backflow Specification for combined check and anti-vacuum valves of nominal size up to and including DN 42 |
BS EN ISO 15493 : 2003
|
PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS), UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) AND CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES (ISO 15493:2003) |
BS 3198:1981
|
Specification for copper hot water storage combination units for domestic purposes |
BS EN 806-1:2000
|
Specifications for installations inside buildings conveying water for human consumption General |
BS CP312-2(1973) : 1973 AMD 2337
|
CODE OF PRACTICE FOR PLASTICS PIPEWORK (THERMOPLASTICS MATERIAL) - UNPLASTICIZED PVC PIPEWORK FOR THE CONVEYANCE OF LIQUIDS UNDER PRESSURE |
BS 5433:1976
|
Specification for underground stopvalves for water services |
BS EN 12201-2 : 2011
|
PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 2: PIPES |
BS EN 598 : 2007
|
DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
BS 6351-1:1983
|
Electric surface heating Specification for electric surface heating devices |
BS 6280:1982
|
Method of vacuum (backsiphonage) test for water-using appliances |
BS 5449:1990
|
Specification for forced circulation hot water central heating systems for domestic premises |
BS EN 60335-2-35:2016
|
Household and similar electrical appliances. Safety Particular requirements for instantaneous water heaters |
BS CP342-2(1974) : 1974
|
CODE OF PRACTICE FOR CENTRALIZED HOT WATER SUPPLY - BUILDINGS OTHER THAN INDIVIDUAL DWELLINGS |
ISO 9453:2014
|
Soft solder alloys Chemical compositions and forms |
BS 7206:1990
|
Specification for unvented hot water storage units and packages |
BS 7291-4:1990
|
Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings Specification for chlorinated polyvinyl chloride (PVC-C) pipes and associated fittings and solvent cement |
BS EN 625:1996
|
Gas-fired central heating boilers. Specific requirements for the domestic hot water operation of combination boilers of nominal heat input not exceeding 70 kW |
BS EN 26:1998
|
Gas fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners |
BS EN 483 : 2000
|
GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW |
BS EN 60335-2-51 : 2003
|
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-51: PARTICULAR REQUIREMENTS FOR STATIONARY CIRCULATION PUMPS FOR HEATING AND SERVICE WATER INSTALLATIONS |
BS 3251:1976
|
Specification. Indicator plates for fire hydrants and emergency water supplies |
BS EN 14451:2005
|
Devices to prevent pollution by backflow of potable water. In-line anti-vacuum valves DN 8 to DN 80. Family D, type A |
BS 5834-2:1983
|
Surface boxes, guards and underground chambers for gas and waterworks purposes Specification for small surface boxes |
BS 5114:1975
|
Specification for performance requirements for joints and compression fittings for use with polyethylene pipes |
BS 5412:1996
|
Specification for low-resistance single taps and combination tap assemblies (nominal size ½ and ¾) suitable for operation at PN 10 max. and a minimum flow pressure of 0.01 MPa (0.1 bar) |
BS EN 1151-1:2006
|
Pumps. Rotodynamic pumps. Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations Non-automatic circulation pumps, requirements, testing, marking |
BS EN 297:1994
|
Gas-fired central heating boilers. Type B11 and B11BS boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW |
BS 5422:2009
|
Method for specifying thermal insulating materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature range -40°C to +700°C |
BS EN 10255:2004
|
Non-alloy steel tubes suitable for welding and threading. Technical delivery conditions |
BS EN 14623:2005
|
Devices to prevent pollution by backflow of potable water. Air gaps with minimum circular overflow (verified by test or measurement). Family A, type G |
BS 1010-2:1973
|
Specification for draw-off taps and stopvalves for water services (screw-down pattern) Draw-off taps and above-ground stopvalves |
BS 6282-2:1982
|
Devices with moving parts for the prevention of contamination of water by backflow Specification for terminal anti-vacuum valves of nominal size up to and including DN 54 |
BS EN 1452-3 : 2000
|
PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 3: FITTINGS |
BS EN 545:2010
|
Ductile iron pipes, fittings, accessories and their joints for water pipelines. Requirements and test methods |
BS 5163-2:2004
|
Valves for waterworks purposes Stem caps for use on isolating valves and associated water control apparatus. Specification |
BS 6956-5:1992
|
Jointing materials and compounds Specification for jointing compounds for use with water, low pressure saturated steam, 1st family gases (excluding coal gas) and 2nd family gases |
BS 534:1990
|
Specification for steel pipes, joints and specials for water and sewage |