BS 6900:1987
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Specification for raw, refined and boiled linseed oils for paints and varnishes
Hardcopy , PDF
16-03-2006
English
23-12-1987
National foreword
Committees responsible
Specification
1. Scope and field of application
2. References
3. Definitions
4. Required characteristics and their tolerances
5. Sampling
6. Density
7. Refractive index
8. Clarity
9. Volatile matter
10. Ash
11. Foots
12. Phosphoric acid test (PAT) value
13. Drying time
14. Liebermann-Storch-Morawski test for presence of
colophony
15. Test for presence of fish oil
16. Test for presence of mineral acid
17. Assessment of break in alkali-refined linseed oils
18. Colour after heating
19. Test report
Annex
Determination of the unsaponifiable matter (Diethyl
ether method)
Tables
1. Required characteristics and their tolerances
2. Rotational frequencies applicable to centrifuges
of various diameters of swing
Figures
1. Pear-shaped sediment tube
2. Cone-shaped sediment tube
3. Pear-shaped centrifuge tube
Requirements and test methods for raw, alkali-refined, acid-refined and boiled linseed oils.
Committee |
STI/10
|
DevelopmentNote |
Also numbered as ISO 150 Supersedes 78/51957 DC and BS 242,243,259,632(1969) (09/2005)
|
DocumentType |
Standard
|
Pages |
18
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
BS 7700:1994 | Micaceous iron oxide pigments for paints. Specifications and test methods |
BS EN ISO 6252:1998 | Plastics. Determination of environmental stress cracking (ESC). Constant-tensile-stress method |
BS 3900-G6:1989 | Methods of test for paints Assessment of resistance to fungal growth |
DEFSTAN 91-109/1(1995) : 1995 | LINSEED OIL, BOILED, TYPE QX |
DEFSTAN 13-171/1(1994) : 1994 | COMPOSITIONS SR 170C AND SR 170D |
BS 7207:1990 | Specification for crude vegetable fats |
DEFSTAN 68-213/1(1993) : 1993 | POLYMERIZED LINSEED OIL |
DEFSTAN 13-169/1(1994) : 1994 | COMPOSITION SR 607 |
BS 4756:1998 | Specification for ready-mixed aluminium priming paints for woodwork |
BS 684-0.1:1995 | Methods of analysis of fats and fatty oils. General introduction General procedures and list of determinations in BS 684 |
BS 7825-3.8:1998 | Calibration of rubber and plastics test equipment. Calibration schedules Degradation and environmental properties |
BS 1752:1983 | Specification for laboratory sintered or fritted filters including porosity grading |
BS 3900-C2:1971 | Methods of test for paints. Tests associated with paint film formation Surface-drying test (ballotini method) |
BS 700-1:1982 | Graduated pipettes Specification for general requirements |
BS 700-2:1982 | Graduated pipettes Specification for pipettes for which no waiting time is specified |
BS 2734:1984 | Specification for boiling flasks (narrow-necked), conical, flat bottom and round bottom |
BS 684-1.2:1984 | Fats and fatty oils determination of refractive index |
BS 700-3:1982 | Graduated pipettes Specification for blow-out pipettes |
BS 4699(1985) : 85 AMD 8893 | METHODS FOR DETERMINATION OF DENSITY OR RELATIVE DENSITY OF PETROLEUM AND PETROLEUM PRODUCTS (PYKNOMETER METHODS) |
BS 6782-2:1987 | Binders for paints Method for determination of saponification value (titrimetric method) |
BS 6782-3:1987 | Binders for paints Method for determination of acid value (titrimetric method) |
BS 6782-5:1987 | Binders for paints Method for estimation of colour of clear liquids by the Gardner colour scale |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.