BS 7023-1:1988
Current
The latest, up-to-date edition.
Dimensional, physical and magnetic characteristicsGuide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency modulation recording at 7958 ftprad, 3.8 tpmm (96 tpi) on both sides
Hardcopy , PDF
English
28-02-1989
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National foreword
Committees responsible
Guide
0. Introduction
1. Scope and field of application
2. Conformance
3. References
4. Definitions
5. General description
6. General requirements
7. Dimensional characteristics
8. Physical characteristics
9. Magnetic characteristics
10. Bibliography
Annexes
A. Measurement of the cartridge thickness
B. Measurement of light transmittance
C. Method for measuring the effective track width
D. Use of hub support rings
Figures
1. Flexible disk cartridge
2. Section A-A
3. Protective envelope with cartridge
4. Jacket dimensions
5. Cartridge thickness
6. Disk dimensions
7. Disk thickness
8. Pressure pad area
9. Measuring gauge
10. Measuring gauge
11. Stylus
12. Measuring device
13. Electronic circuitry
14. Track width
Dimensional, physical and magnetic characteristics.
| Committee |
ICT/1
|
| DevelopmentNote |
Supersedes 88/60280. Also numbered as EN 28378-1 & ISO 8378-1. (09/2005)
|
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
This part of ISO 8378 specifies the dimensional, physical and magnetic characteristics of the cartridge so as to provide physical interchangeability between data processing systems.
NOTE Numeric values in the SI and/or Imperial measurement system in this part of ISO 8378 may have been rounded off and therefore are consistent with, but not exactly equal to, each other. Either system may be used, but the two should be neither intermixed nor re-converted. The original design was made using Imperial units and further developments were made using SI units.
| Standards | Relationship |
| SNV BS 7023-1 : 1989 | Identical |
| BS 7023-2:1988 | Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency modulation recording at 7958 ftprad, 3.8 tpmm (96 tpi) on both sides Track format A |
| BS 7023-3:1988 | Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency modulation recording at 7958 ftprad, 3.8 tpmm (96 tpi) on both sides Track format B |
| BS 6542-2:1988 | File structure and labelling of flexible disk cartridges for information interchange Specification for variable file allocation structure |
| ISO/IEC 4873:1991 | Information technology ISO 8-bit code for information interchange Structure and rules for implementation |
| ISO/IEC 2022:1994 | Information technology Character code structure and extension techniques |
| BS 7023-3:1988 | Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency modulation recording at 7958 ftprad, 3.8 tpmm (96 tpi) on both sides Track format B |
| BS 7023-2:1988 | Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency modulation recording at 7958 ftprad, 3.8 tpmm (96 tpi) on both sides Track format A |
| ISO 9293:1987 | Information processing Volume and file structure of flexible disk cartridges for information interchange |
| BS 0-3:1997 | A standard for standards Specification for structure, drafting and presentation |
| ISO/IEC 646:1991 | Information technology ISO 7-bit coded character set for information interchange |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.