BS 7412:2002
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Plastics windows made from unplasticized polyvinyl chloride (PVC-U) extruded hollow profiles. Specification
Hardcopy , PDF
English
28-09-2004
30-04-2007
Committees responsible
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviations for window types and handing
5 Materials
6 Welds
7 Mechanical joints (mullion and transom joints)
8 Colour consistency
9 Construction
10 Glazing
11 Security
12 Safety
13 Deleted
14 Weathertightness
15 Operation and strength
16 Whole window U-value
17 Marking
Annex A (normative) Weld test
Annex B (normative) Mechanical joint tests
Annex C Deleted
Annex D Deleted
Annex E (informative) Evaluation of conformity
Annex F (informative) Durability and recycling
Bibliography
Describes the requirements for the materials, including glass and glazing, construction, security, safety, weathertightness, and operation and strength performance of new windows made from PVC-U extruded hollow profiles conforming to BS 7413, up to the point of installation of the windows provided the windows have been handled and stored in accordance with the manufacturer's instructions.
| Committee |
B/538/1
|
| DevelopmentNote |
Supersedes BS 7412(1991) and 99/107861 DC (03/2002) Supersedes 03/111700 DC. (08/2004)
|
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| Supersedes |
| BS EN 12020-2:2016 | Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 Tolerances on dimensions and form |
| BS 5368-2:1980 | Methods of testing windows Watertightness test under static pressure |
| BS 6262-4:1994 | Glazing for buildings Safety related to human impact |
| BS 6375-1:1989 | Performance of windows Classification for weathertightness (including guidance on selection and specification) |
| BS 5368-1:1976 | Methods of testing windows Air permeability test |
| BS 8213-1:1991 | Windows, doors and rooflights Code of practice for safety in use and during cleaning of windows and doors (including guidance on cleaning materials and methods) |
| BS EN 10088-2:2014 | Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| BS 3900-D9:1986 | Methods of test for paints. Optical tests on paint films Determination of colour and colour difference: measurement |
| BS EN 10142:2000 | Continuously hot-dip zinc coated low carbon steels strip and sheet for cold forming. Technical delivery conditions |
| BS EN 12020-1:2008 | Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 Technical conditions for inspection and delivery |
| BS 8213-4:1990 | Windows, doors and rooflights Code of practice for the installation of replacement windows and doorsets in dwellings |
| BS 952-2:1980 | Glass for glazing Terminology for work on glass |
| BS 6100-1.3.6:1991 | Glossary of building and civil engineering terms. General and miscellaneous. Parts of construction works Jointing products, builders\' hardware and accessories |
| BS 6100-1.6:1985 | Glossary of building and civil engineering terms. General and miscellaneous Persons |
| BS 7950:1997 | Specification for enhanced security performance of windows for domestic applications |
| BS EN 1670:2007 | Building hardware. Corrosion resistance. Requirements and test methods |
| BS 6375-2:1987 | Performance of windows Specification for operation and strength characteristics |
| BS 5368-3:1978 | Methods of testing windows Wind resistance tests |
| BS EN 573-3:2013 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical composition and form of products |
| BS EN 515:2017 | Aluminium and aluminium alloys. Wrought products. Temper designations |
| BS EN 12210:2016 | Windows and doors. Resistance to wind load. Classification |
| BS 3900-D10:1986 | Methods of test for paints Determination of colour and colour difference: calculation |
| BS EN ISO 105-A01:2010 | Textiles. Tests for colour fastness General principles of testing |
| BS EN 12211:2016 | Windows and doors. Resistance to wind load. Test method |
| BS 3900-D8:1986 | Methods of test for paints. Optical tests on paint films Determination of colour and colour difference: principles |
| BS 5588-1:1990 | Fire precautions in the design, construction and use of buildings Code of practice for residential buildings |
| BS EN 573-4:2004 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Forms of products |
| BS 6262:1982 | Code of practice for glazing for buildings |
| BS 5713:1979 | Specification for hermetically sealed flat double glazing units |
| BS EN ISO 4042:2000 | Fasteners. Electroplated coatings |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.