BS 812-1:1975
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Testing aggregates Methods for determination of particle size and shape
15-04-1994
BS 882:1992
BS 812-101:1984
BS 812-106:1985
BS 812-105.2:1990
BS 812-105-105.1:1985
BS 812-102:1989
30-04-1991
1 Scope
2 References
3 Reporting
4 Significance of the results
5 Sampling and submission of samples
6 Description and classification
7 Determination of particle size and shape
Appendix A - Repeatability and reproducibility of test results
Includes a petrographical classification.
Committee |
B/502/6
|
DevelopmentNote |
Subsequent publication of BS 812: Parts 102, 103, 105 has superseded many of the tests originally specified in this Part. As a result of the publication of the partial technical update of BS 882: 1992 which reflects preliminary work being undertaken in Europe under the auspices of CEN/TC 154, Aggregates, BS 812: Part 1: 1975 is no longer required.
|
DocumentType |
Standard
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
BS 1902-3.3:1981 | Methods of testing refractory materials. General and textural properties Sieve analysis (methods 1902-303) |
BS 6319-3:1983 | Testing of resin compositions for use in construction. Method for measurement of flexural strength |
BS 6349-5:1991 | Maritime structures Code of practice for dredging and land reclamation |
BS 4550-4:1978 | Methods of testing cement Standard coarse aggregate for concrete cubes |
14/30268442 DC : 0 | BS 5930 - CODE OF PRACTICE FOR GROUND INVESTIGATIONS |
BS 3247:1984 | Specification for salt for spreading on highways for winter maintenance |
BS 5930:2015+A1:2020 | Code of practice for ground investigations |
BS 6319-1:1983 | Testing of resin and polymer/cement compositions for use in construction Method for preparation of test specimens |
BS 812-2:1975 | Testing aggregates Methods for determination of physical properties |
BS 6319-2:1983 | Testing of resin and polymer/cement compositions for use in construction Method for measurement of compressive strength |
BS 6463-1:1984 | Quicklime, hydrated lime and natural calcium carbonate Methods of sampling |
BS 5930:1981 | Code of practice for site investigations |
BS 63-2:1987 | Road aggregates Specification for single-sized aggregate for surface dressing |
BS 6319-3:1990 | Testing of resin and polymer/cement compositions for use in construction Methods for measurement of modulus of elasticity in flexure and flexural strength |
BS 5080-1:1993 | Structural fixings in concrete and masonry Method of test for tensile loading |
BS 594-1:1985 | Hot rolled asphalt for roads and other paved areas. Specification for constituent materials and asphalt mixtures |
BS 63-1:1987 | Road aggregates Specification for single-sized aggregate for general purposes |
BS 594-1:1992 | Hot rolled asphalt for roads and other paved areas Specification for constituent materials and asphalt mixtures |
BS 4987-1:2001 | Coated macadam (asphalt concrete) for roads and other paved areas Specification for constituent materials and for mixtures |
BS 6463-3:1987 | Quicklime, hydrated lime and natural calcium carbonate Methods of test for physical properties of quicklime |
BS 5273:1975 | Specification. Dense tar surfacing for roads and other paved areas |
BS 6319-10:1987 | Testing of resin and polymer/cement compositions for use in construction Method for measurement of temperature of deflection under a bending stress |
BS 1902-7.1:1987 | Methods of testing refractory materials. Unshaped refractories used in monolithic construction Guidance on sampling (of unshaped refractories) |
BS 4550-5:1978 | Methods of testing cement Standard sand for concrete cubes |
BS 6577:1985 | Specification for mastic asphalt for building (natural rock asphalt aggregate) |
BS 6319-6:1984 | Testing of resin and polymer/cement compositions for use in construction Method for determination of modulus of elasticity in compression |
BS 6477:1992 | Specification for water repellents for masonry surfaces |
BS 882:1983 | Specification for aggregates from natural sources for concrete |
BS DD83(1983) : 1983 | ASSESSMENT OF THE COMPOSITION OF FRESH CONCRETE |
BS 812-103.2:1989 | Testing aggregates. Method for determination of particle size distribution Sedimentation test |
BS 598-3:1985 | Sampling and examination of bituminous mixtures for roads and other paved areas Methods for design and physical testing |
BS 812-103.1:1985 | Testing aggregates. Method for determination of particle size distribution Sieve tests |
BS 4550-6:1978 | Methods of testing cement Standard sand for mortar cubes |
BS DD76-2(1983) : 1983 | PRECAST CONCRETE PIPES OF COMPOSITE CONSTRUCTION - PRECAST CONCRETE PIPES STRENGTHENED BY CHOPPED ZINC-COATED STEEL FIBRES |
BS 6677-2:1986 | Clay and calcium silicate pavers for flexible pavements Code of practice for design of lightly trafficked pavements |
BS 5080-1:1974 | Methods of test for structural fixings in concrete and masonry Tensile loading |
BS 5835-1:1980 | Recommendations for testing of aggregates Compactibility test for graded aggregates |
BS 6543(1985) : 1985 | GUIDE TO USE OF INDUSTRIAL BY-PRODUCTS AND WASTE MATERIALS IN BUILDING AND CIVIL ENGINEERING |
BS 598-107:1990 | Sampling and examination of bituminous mixtures for roads and other paved areas Method of test for the determination of the composition of design wearing course rolled asphalt |
BS 5075-2:1982 | Concrete admixtures Specification for air-entraining admixtures |
BS 5911-3:1982 | Precast concrete pipes, fittings and ancillary products Specification for pipes and fitting with ogee joints |
BS 5930:2015 | Code of practice for ground investigations |
BS 812-106:1985 | Testing aggregates Method for determination of shell content in coarse aggregate |
BS 604:1982 | Specification for graduated glass measuring cylinders |
BS 368:1971 | Specification for precast concrete flags |
BS 812-105.2:1990 | Testing aggregates. Methods for determination of particle shape Elongation index of coarse aggregate |
BS 812-103(1985) : AMD 6003 | TESTING AGGREGATES - METHODS FOR DETERMINATION OF PARTICLE SIZE DISTRIBUTION |
BS 812-4:1976 | Testing aggregates Methods for determination of chemical properties |
BS 812-105.1:1989 | Testing aggregates. Methods for determination of particle shape Flakiness index |
BS 812-3:1975 | Testing aggregates Methods for determination of mechanical properties |
BS 812-101:1984 | Testing aggregates Guide to sampling and testing aggregates |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.