BS 891-1:1962
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Method for Rockwell hardness test Testing of metals
Available format(s)
Hardcopy , PDF
Superseded date
23-07-2013
Superseded by
Language(s)
English
Published date
01-08-1964
Publisher
Test requirements and procedure using scales A to K inclusive; minimum thickness of test pieces, accuracy of hardness measurements.
| Committee |
ISE/101
|
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| EN 4 : LATEST | Similar to |
| AS B84.1-1967 | Identical |
| BS 3696-1:1977 | Specification for master gears Spur and helical gears (metric module) |
| BS 5770-4:1981 | Steel strip intended for the manufacture of springs Specification for martensitic and austenitic stainless steel |
| BS 3606:1978 | Specification for steel tubes for heat exchangers |
| BS 906-2:1972 | Specification for engineers\' parallels. Imperial units |
| BS A 300:1989 | Specification for procurement of alloy steel bolts with strength classification 1 100 MPa and MJ threads |
| BS 4190:1967 | Specification for ISO metric black hexagon bolts, screws and nuts |
| BS 2559-4:1973 | Specification for screwdrivers Ratchet screwdrivers |
| BS 5770-2:1981 | Steel strip intended for the manufacture of springs Specification for cold rolled carbon and low alloy steel |
| BS 5595-2:1981 | Interchangeable magnetic twelve-disk pack for information processing Specification for 200 Mbytes magnetic twelve-disk pack |
| BS 4L 101:1990 | Procedure for inspection, testing and acceptance of aluminium-base and magnesium-base ingots and castings |
| DEFSTAN 95-5/2(1987) : 1987 | INSPECTION OF WROUGHT STEEL FOR STRESSED APPLICATIONS |
| BS 6104-3:1981 | Mechanical properties of fasteners Specification for set screws and similar threaded fasteners not under tensile stresses |
| BS 5577:1984 | Specification for table cutlery |
| BS 6101-1:1981 | Machine tool ball screws Methods of calculating dynamic and static load and life ratings |
| BS 4551:1980 | Methods of testing mortars, screeds and plasters |
| BS 4825-3:1976 | Specification. Stainless steel pipes and fittings for the food industry. Clamp type couplings |
| BS 1673-10:1977 | Methods of test for raw rubber and unvulcanized compounded rubber. Measurement of prevulcanizing and curing characteristics by means of curemeters |
| BS 4825-4:1977 | Specification for stainless steel pipes and fittings for the food industry Screwed type couplings |
| BS SP 166:1982 | Specification for spring retaining rings for aerospace application: carbon steel circlips (metric series) |
| BS 1881-120:1983 | Testing concrete Method for determination of the compressive strength of concrete cores |
| BS 7201-1:1989 | Hydraulic fluid power. Gas loaded accumulators Specification for seamless steel accumulator bodies above 0.5 L water capacity |
| BS 3531-5.2:1990 | Implants for osteosynthesis. Bone screws and auxiliary equipment Specification for screwdrivers for screws having heads with single slot, cruciate slot or cross-recess |
| BS 1943:1989 | Specification for woodworking chisels and gouges |
| BS 192:1982 | Specification for open-ended wrenches |
| BS 4882:1990 | Specification for bolting for flanges and pressure containing purposes |
| BS 4437:1987 | Method for determining hardenability of steel by end quenching (Jominy test) |
| BS 1429:1980 | Specification for annealed round steel wire for general engineering springs |
| BS 5045-1:1982 | Transportable gas containers Specification for seamless steel gas containers above 0.5 litre water capacity |
| BS 3692:1967 | Specification for ISO metric precision hexagon bolts, screws and nuts. Metric units |
| BS 876:1995 | Specification for hand hammers |
| BS 970-1:1983 | Specification for wrought steels for mechanical and allied engineering purposes General inspection and testing procedures and specific requirements for carbon, carbon manganese, alloy and stainless steels |
| BS 6105:1981 | Specification for corrosion-resistant stainless steel fasteners |
| BS 5045-6:1987 | Transportable gas containers Specification for seamless containers of less than 0.5 litre water capacity |
| BS 970-4:1970 | Specification for wrought steels for mechanical and allied engineering purposes Valve steels |
| BS 4395-2:1969 | Specification for high strength friction grip bolts and associated nuts and washers for structural engineering Higher grade bolts and nuts and general grade washers |
| BS 426:1969 | Specification for fixed centres for use on machine tools and in other applications |
| BS 4A 4:1966 | Test pieces and test methods for metallic materials for aircraft. Metric units |
| BS 4929-2:1973 | Specification for steel hexagon prevailing-torque type nuts Unified (inch) series |
| BS 6333:1983 | Specification for adjustable wrenches |
| BS 1881-109:1983 | Testing concrete Method for making test beams from fresh concrete |
| BS A 299:1989 | Specification for procurement of alloy steel protruding head bolts with strength classification 1 250 MPa and MJ threads |
| BS A 298:1988 | Methods of test for self-locking nuts with maximum operating temperature greater than 425°C |
| BS 3537:1979 | Specification for gudgeon pins up to 200 mm diameter |
| BS 1881-110:1983 | Testing concrete Method for making test cylinders from fresh concrete |
| BS 3962-6:1980 | Methods of test for finishes for wooden furniture Assessment of resistance to mechanical damage |
| BS 5600-4.5:1979 | Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals Rockwell hardness test (scale A) |
| BS 436-3:1986 | Spur and helical gears Method for calculation of contact and root bending stress limitations for metallic involute gears |
| BS 235:1987 | Specification for gears for electric traction |
| DEFSTAN 51-11(PT33)/1(1988) : INTERIM | HAND TOOLS, GENERAL PURPOSE PART 33: PUNCHES, DRIVE PIN, AND CENTRE SOLID |
| BS 4395-1:1969 | Specification for high strength friction grip bolts and associated nuts and washers for structural engineering General grade |
| BS 6813:1987 | Specification for trade cutlery for use with food |
| BS 5194-4:1985 | Surgical instruments Specification for scissors, shears and other jointed cutting instruments |
| BS 2559-1:1971 | Specification for screwdrivers Screwdrivers for slotted head screws |
| BS 5045-3:1984 | Transportable gas containers Specification for seamless aluminium alloy gas containers above 0.5 litre water capacity and up to 300 bar charged pressure at 15°C |
| BS 3HR 100:1978 | Procedure for inspection and testing of wrought heat-resisting alloys |
| BS 6104-2:1983 | Mechanical properties of fasteners Specification for nuts with specified proof load values |
| BS HC 100:1972 | Inspection and testing procedure for iron, nickel, copper, cobalt and refractory metal base alloy castings |
| BS 3388:1973 | Specification for forks, shovels and spades |
| BS AU 142:1968 | Methods of test for brake linings materials |
| BS 4395-3:1973 | Specification for high strength friction grip bolts and associated nuts and washers for structural engineering Higher grade bolts (waisted shank), nuts and general grade washers |
| BS 4550-3.4:1978 | Methods of testing cement. Physical tests Strength tests |
| BS 5770-3:1981 | Steel strip intended for the manufacture of springs Specification for pre-hardened and tempered carbon steel |
| BS 5194-3:1985 | Surgical instruments Specification for dissecting forceps |
| BS 1254:1981 | Specification for WC seats (plastics) |
| BS 6104-1:1981 | Mechanical properties of fasteners Specification for bolts, screws and studs |
| BS 5194-2:1989 | Surgical instruments Specification for instruments with pivot joints (excluding cutting instruments) |
| BS 3673-3:1968 | Specification for spring retaining rings Carbon steel C clips |
| BS 4933:1973 | Specification for ISO metric black cup and countersunk head bolts and screws with hexagon nuts |
| BS 5770-1:1981 | Steel strip intended for the manufacture of springs Specification for hot rolled carbon and low alloy steel |
| BS 5194-2:1985 | Surgical instruments Specification for instruments with pivot joints (excluding cutting instruments) |
| BS 876:1981 | Specification for hand hammers |
| BS 906-1:1972 | Specification for engineers\' parallels Metric units |
| BS 5861:1980 | Specification for rear-mounted power take-offs on agricultural tractors |
| BS 3673-4:1977 | Specification for spring retaining rings Carbon steel circlips - metric series |
| BS 4929-1:1973 | Specification for steel hexagon prevailing-torque type nuts Metric series |
| BS 3623:1981 | Specification for woodworkers\' metal-bodied planes |
| BS 1449-1:1983 | Steel plate, sheet and strip. Specification for carbon and carbon-manganese plate, sheet and strip |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.