BS ISO 289-4:2003
|
Rubber, unvulcanized. Determinations using a shearing-disc viscometer Determination of the Mooney stress-relaxation rate |
BS ISO 1382:2012
|
Rubber. Vocabulary |
BS ISO 4664-1:2011
|
Rubber, vulcanized or thermoplastic. Determination of dynamic properties General guidance |
ISO 1432:2013
|
Rubber, vulcanized or thermoplastic Determination of low-temperature stiffening (Gehman test) |
BS ISO 188:2011
|
Rubber, vulcanized or thermoplastic. Accelerated ageing and heat resistance tests |
BS ISO 27727:2008
|
Rubber, vulcanized. Measurement of fatigue crack growth rate |
BS 903-A63:1995
|
Physical testing of rubber Method for determination of crystallization effects by hardness measurements |
BS ISO 7619-1:2010
|
Rubber, vulcanized or thermoplastic. Determination of indentation hardness Durometer method (Shore hardness) |
BS ISO 1817:2015
|
Rubber, vulcanized or thermoplastic. Determination of the effect of liquids |
BS ISO 815-1:2014
|
Rubber, vulcanized or thermoplastic. Determination of compression set At ambient or elevated temperatures |
BS ISO 8013:2012
|
Rubber, vulcanized. Determination of creep in compression or shear |
BS ISO 4649:2017
|
Rubber, vulcanized or thermoplastic. Determination of abrasion resistance using a rotating cylindrical drum device |
BS ISO 24453:2008
|
Rubber. Acquisition and presentation of comparable single-point data |
BS 903-A9:1988
|
Physical testing of rubber Determination of abrasion resistance |
BS ISO 4662:2017
|
Rubber, vulcanized or thermoplastic. Determination of rebound resilience |
BS ISO 4666-4:2007
|
Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing Constant-stress flexometer |
BS ISO 6505:2015
|
Rubber, vulcanized or thermoplastic. Determination of tendency to adhere to and corrode metals |
BS ISO 3417:2008
|
Rubber. Measurement of vulcanization characteristics with the oscillating disc curemeter |
BS ISO 4664-2:2006
|
Rubber, vulcanized or thermoplastic. Determination of dynamic properties Torsion pendulum methods at low frequencies |
BS ISO 3387:2012
|
Rubber. Determination of crystallization effects by hardness measurements |
BS ISO 5893:2002
|
Rubber and plastics test equipment. Tensile, flexural and compression types (constant rate of traverse). Specification |
BS 903-5:2004
|
Physical testing of rubber Guide to the application of rubber testing to finite element analysis |
BS ISO 15113:2005
|
Rubber. Determination of frictional properties |
BS ISO 2285:2013
|
Rubber, vulcanized or thermoplastic. Determination of tension set underconstant elongation, and of tension set, elongation and creep underconstant tensile load |
BS ISO 48:2010
|
Rubber, vulcanized or thermoplastic. Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
BS ISO 27588:2012
|
Rubber, vulcanized or thermoplastic. Determination of dead-load hardness using the very low rubber hardness (VLRH) scale |
BS ISO 4665:2016
|
Rubber, vulcanized or thermoplastic. Resistance to weathering |
BS ISO 23794:2015
|
Rubber, vulcanized or thermoplastic. Abrasion testing. Guidance |
BS 6716:1986
|
Guide to properties and types of rubber |
BS ISO 11345:2006
|
Rubber. Assessment of carbon black and carbon black/silica dispersion. Rapid comparative methods |
BS 903-A45(2000) : 2000
|
RUBBER, VULCANIZED OR THERMOPLASTIC - RESISTANCE TO OZONE CRACKING - PART 3: REFERENCE AND ALTERNATIVE METHODS FOR DETERMINING THE OZONE CONCENTRATION IN LABORATORY TEST CHAMBERS |
BS ISO 37:2011
|
Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain properties |
BS ISO 289-1:2015
|
Rubber, unvulcanized. Determinations using a shearing-disc viscometer Determination of Mooney viscosity |
BS ISO 14309:2011
|
Rubber, vulcanized or thermoplastic. Determination of volume and/or surface resistivity |
BS ISO 34-2:2015
|
Rubber, vulcanized or thermoplastic. Determination of tear strength Small (Delft) test pieces |
BS ISO 23529:2016
|
Rubber. General procedures for preparing and conditioning test pieces for physical test methods |
BS ISO 1431-1:2012
|
Rubber, vulcanized or thermoplastic. Resistance to ozone cracking Static and dynamic strain testing |
BS EN 60243-2:2014
|
Electric strength of insulating materials. Test methods Additional requirements for tests using direct voltage |
BS ISO 36:2017
|
Rubber, vulcanized or thermoplastic. Determination of adhesion to textile fabrics |
BS ISO 4666-3:2016
|
Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing Compression flexometer (constant-strain type) |
BS ISO 6502:2016
|
Rubber. Guide to the use of curemeters |
PD ISO/TR 12134:2010
|
Rubber. Estimation of uncertainty for test methods. Non-functional parameters |
BS ISO 2781 : 2008
|
RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DENSITY |
BS ISO 7619-2:2004
|
Rubber, vulcanized or thermoplastic. Determination of indentation hardness IRHD pocket meter method |
BS ISO 7743:2017
|
Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties |
BS ISO 815-2:2014
|
Rubber, vulcanized or thermoplastic. Determination of compression set At low temperatures |
BS EN ISO 6179:2017
|
Rubber, vulcanized or thermoplastic. Rubber sheets and rubber-coated fabrics. Determination of transmission rate of volatile liquids (gravimetric technique) |
BS ISO 9026:2007
|
Raw rubber or unvulcanized compounds. Determination of green strength |
BS ISO 18898:2016
|
Rubber. Calibration and verification of hardness testers |
BS ISO 2393:2014
|
Rubber test mixes. Preparation, mixing and vulcanization. Equipment and procedures |
BS ISO 24454:2008
|
Rubber. Acquisition and presentation of comparable multi-point data |
ISO 289-3:2015
|
Rubber, unvulcanized Determinations using a shearing-disc viscometer Part 3: Determination of the Delta Mooney value for non-pigmented, oil-extended emulsion-polymerized SBR |
BS ISO 2782:2006
|
Rubber, vulcanized or thermoplastic. Determination of permeability to gases |
ISO 4637:1979
|
Rubber-coated fabrics Determination of rubber-to-fabric adhesion Direct tension method |
BS ISO 2921:2011
|
Rubber, vulcanized. Determination of low-temperature retraction (TR test) |
BS ISO 1827:2016
|
Rubber, vulcanized or thermoplastic. Determination of shear modulus and adhesion to rigid plates. Quadruple-shear methods |
BS ISO 812:2017
|
Rubber, vulcanized or thermoplastic. Determination of low-temperature brittleness |
BS 903-A60.1:2000
|
Physical testing of rubber. Curemetering Guide to the use of curemeters |
BS ISO 5600:2017
|
Rubber. Determination of adhesion to rigid materials using conical shaped parts |
BS 903-1:1995
|
Physical testing of rubber Guide to the selection and use of methods of test for rubber |
BS ISO 6943:2017
|
Rubber, vulcanized. Determination of tension fatigue |
BS 903-A27:1986
|
Physical testing of rubber Determination of rubber to fabric adhesion. Direct tension method |
BS ISO 6914:2013
|
Rubber, vulcanized or thermoplastic. Determination of ageing characteristics by measurement of stress relaxation in tension |
BS ISO 1795:2017
|
Rubber, raw natural and raw synthetic. Sampling and further preparative procedures |
BS ISO 19003:2006
|
Rubber and rubber products. Guidance on the application of statistics to physical testing |
BS ISO 5603:2017
|
Rubber, vulcanized. Determination of adhesion to wire cord |
BS ISO 4647:2010
|
Rubber, vulcanized. Determination of static adhesion to textile cord. H-pull test |
BS 903-A18:1973
|
Physical testing of rubber Determination of equilibrium water vapour absorption |
BS ISO 4666-1:2010
|
Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing Basic principles |
BS ISO 13226:2011
|
Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers |
BS 903-A58.1:2001
|
Physical testing of rubber Methods using the Mooney viscometer. Determination of the Delta Mooney value for non-pigmented, oil-extended, emulsion-polymerized SBR - Determination of the Delta Mooney value for non-pigmented,oil-extended, emulsion-polymerized SBR |
BS ISO 12493:2017
|
Rubber, vulcanized. Determination of stress in tension upon heating |
BS ISO 18517:2015
|
Rubber, vulcanized or thermoplastic. Hardness testing. Introduction and guide |
BS ISO 34-1:2015
|
Rubber, vulcanized or thermoplastic. Determination of tear strength Trouser, angle and crescent test pieces |
ISO 3387:2012
|
Rubber Determination of crystallization effects by hardness measurements |
BS ISO 1853:2011
|
Conducting and dissipative rubbers, vulcanized or thermoplastic. Measurement of resistivity |
BS ISO 2007:2007
|
Rubber, unvulcanized. Determination of plasticity. Rapid-plastimeter method |
BS ISO 2878:2017
|
Rubber, vulcanized or thermoplastic. Antistatic and conductive products. Determination of electrical resistance |
BS ISO 132:2011
|
Rubber, vulcanized or thermoplastic. Determination of flex cracking and crack growth (De Mattia) |
BS ISO 813:2016
|
Rubber, vulcanized or thermoplastic. Determination of adhesion to a rigid substrate. 90° peel method |
BS ISO 814:2017
|
Rubber, vulcanized or thermoplastic. Determination of adhesion to metal. Two-plate method |
ISO/TR 9272:2005
|
Rubber and rubber products Determination of precision for test method standards |
BS ISO 1431-3:2017
|
Rubber, vulcanized or thermoplastic. Resistance to ozone cracking Reference and alternative methods for determining the ozone concentration in laboratory test chambers |
BS ISO 3384-1 : 2011
|
RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATIONIN COMPRESSION - PART 1: TESTING AT CONSTANT TEMPERATURE |
BS ISO 6133:2015
|
Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength |
BS ISO 2930:2017
|
Rubber, raw natural. Determination of plasticity retention index (PRI) |
ISO/TR 11753:1992
|
Rubber and rubber products — Confidence intervals of repeatability and reproducibility values determined by inter-laboratory tests |
BS ISO 3865:2005
|
Rubber, vulcanized or thermoplastic. Methods of test for staining in contact with organic material |