EN 297:1994/A2:1996/AC:2006
|
GAS-FIRED CENTRAL HEATING BOILERS - TYPE B[11] AND B[11BS] BOILERS FITTED WITH ATMOSPHERIC BURNERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW |
DEFSTAN 91-56/2(1997) : 1997
|
GREASE, SILICONE, METAL TO RUBBER - NATO CODE: G-394 - JOINT SERVICE DESIGNATION: XG-315 |
DEFSTAN 47-2/3(1991) : 1991 AMD 1 1994
|
RUBBER HOSE ASSEMBLIES FOR HYDRAULIC SYSTEMS |
DEFSTAN 59-97/3(1990) : AMD 1
|
HEAT SHRINKABLE INSULATION MATERIALS - GENERAL REQUIREMENTS, TESTS AND TEST METHODS FOR CAPABILITY APPROVAL |
DEFSTAN 91-35/2(1995) : 1995
|
HYDRAULIC FLUID PETROLEUM, EMULSIFYING, JOINT SERVICE DESIGNATION: OX-30 |
BS 5120:1987
|
Specification for rubber hoses for gas welding and allied processes |
BS EN 2261:1995
|
Silicone rubber (VMQ). Hardness 70 IRHD |
BS 5342:1985
|
Specification for rubber hoses for high-pressure saturated steam |
DEFSTAN 47-2/4(1997) : 1997
|
RUBBER HOSE AND HOSE ASSEMBLIES FOR HYDRAULIC SYSTEMS (THICK COVER) |
DEFSTAN 59-15(PT1)/3(1990) : 1990 CORR
|
ELASTOMERIC INSULATING MATERIALS AND POLYTETRAFLUOROETHYLENE (PTFE) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST METHODS FOR QUALIFICATION APPROVAL |
DEFSTAN 91-43/2(1993) : 1993
|
LUBRICATING OIL, ENGINE: GRADE 50 NATO CODE NO. 0-182 JOINT SERVICE DESIGNATION: OMD-330 |
BS 903-A37:1987
|
Physical testing of rubber Determination of adhesion to and corrosion of metals |
BS MA 16:1971
|
Specification for inflatable boats (manual or motor propelled) |
BS EN 2260:1995
|
Silicone rubber (VMQ). Hardness 60 IRHD |
BS EN 2429:1995
|
Ethylene-propylene rubber (EPM/EPDM). Hardness 60 IRHD |
BS 2751(1982) : AMD 4728
|
SPECIFICATION FOR ACRYLONITRILE BUTADIENE RUBBER COMPOUNDS |
BS EN 2430:1995
|
Ethylene-propylene rubber (EPM/EPDM). Hardness 70 IRHD |
BS 3858:1992
|
Specification for binding and identification sleeves for use on electric cables and wires |
BS AU 217-2:1989
|
Maximum road speed limiters for motor vehicles Specification for system and component requirements |
BS 2F 67:1980
|
Specification for hose for aviation fuel and engine lubricating oil for aeronautical purposes |
BS 4089:1966
|
Specification for rubber hose and hose assemblies for liquefied petroleum gas lines |
BS 1435-1:1987
|
Rubber hose assemblies for oil suction and discharge services Specification for the assemblies |
BS 7825-3.8:1998
|
Calibration of rubber and plastics test equipment. Calibration schedules Degradation and environmental properties |
BS 6066:1981
|
Specification for thermoplastics hoses for compressed air |
BS 7780-4:1995
|
Specification for rotary shaft lip type seals Performance test procedures |
BS EN 2104:1996
|
Acrylonitrile-butadiene rubber (NBR). Hardness 40 IRHD |
BS EN 2262:1995
|
Silicone rubber (VMQ/PVMQ) with high tear strength. Hardness 50 IRHD |
BS EN 2428:1995
|
Ethylene-propylene rubber (EPM/EPDM). Hardness 50 IRHD |
BS EN 2431:1995
|
Ethylene-propylene rubber (EPM/EPDM). Hardness 80 IRHD |
BS F 130:1987
|
Specification for rubber bonded compressed aramid fibre jointing material for aerospace purposes |
BS EN 2259:1995
|
Silicone rubber (VMQ). Hardness 50 IRHD |
BS 2494:1986
|
Specification for elastomeric joint rings for pipework and pipelines |
BS 5118:1980
|
Specification for rubber hoses for compressed air |
BS 3158:1985
|
Specification for rubber hoses and hose assemblies for aircraft ground fuelling and defuelling |
BS 7019:1989
|
Specification for fully screened 400 A bolted flameproof cable couplers and adaptors for use on systems up to and including 6.6 kV, primarily for use in mines |
BS 2494:1990
|
Specification for elastomeric seals for joints in pipework and pipelines |
BS G 246:1991
|
Specification for cable ties for installation under controlled tension on aircraft electric cable harnesses |
BS 6847:1987
|
Specification for plastics hoses for suction and low-pressure discharge of petroleum liquids |
BS 7184:1989
|
Recommendations for selection, use and maintenance of chemical protective clothing |
BS F 125:1973
|
Specification for rubber bonded compressed asbestos fibre jointing |
BS AU 218:1987
|
Specification for automotive synchronous belt drives |
BS 2767:1972
|
Specification for valves and unions for hot water radiators |
BS 3558:1980
|
Glossary of rubber terms |
BS AU 150b:1984
|
Specification for automotive V-belts and pulleys |
BS 3905:1984
|
Specification for 3.8/6.6 kV, 300 A bolted flameproof cable couplers and adaptors, primarily for use in mines |
BS 3395:1989
|
Specification for electrically bonded rubber hoses and hose assemblies for dispensing petroleum based fuels |
BS 4332:1989
|
Specification for phenol-formaldehyde resin-bonded cork jointing |
BS 2752:1990
|
Specification for chloroprene rubber compounds |
BS 3492:1987
|
Specification for road and rail tanker hoses and hose assemblies for petroleum products, including aviation fuels |
BS 2752:1982
|
Specification for chloroprene rubber compounds |
BS 903-2:1997
|
Physical testing of rubber Guide to the application of statistics to rubber testing |
BS 3G 230:2000
|
Specification for general requirements for aircraft electrical cables (second series) |
BS 7442-0:1991
|
Rubber or plastics covered rollers Introduction |
BS 903-A18:1973
|
Physical testing of rubber Determination of equilibrium water vapour absorption |
BS 3G 198-1:1989
|
Sleeves for aircraft electric cables and equipment wires Specification for elastomeric sleeves for binding and identification |
BS 3395:1980
|
Specification for electrically bonded hose and hose assemblies for fuel dispensers |
BS 6997:1990
|
Specification for elastomeric toroidal sealing rings (\'O\'-rings) manufactured from acrylonitrile-butadiene rubbers complying with BS 6996 |
BS G 198-5:1997
|
Sleeves and moulded components for aircraft electric cables and equipment wires Specification for heat shrinkable moulded shapes |
BS 3682-1:1994
|
Specification for railway brake hose Specification for compressed air brake hose |
BS 3454:1984
|
Specification for 1.9/3.3 kV, 300 A bolted flameproof cable couplers and adaptors (including 380/660 V and 640/1100 V, 300 A adaptors), primarily for use in mines |
BS 5409-2:1978
|
Specification for nylon tubing Plasticized and unplasticized nylon tubing types 11 and 12 for use primarily in the automobile industry |
BS AU 110a:1995
|
Specification for rubber hoses and hose assemblies for automotive air pressure braking systems |
BS 3454:1995
|
Specification for 1.9/3.3 kV, 300 A bolted flameproof cable couplers and adaptors (including 380/660 V and 640/1100 V, 300 A adaptors) for use in coal mines |
BS 2767:1991
|
Specification for manually operated copper alloy valves for radiators |
BS 4089:1989
|
Specification for hoses and hose assemblies for liquefied petroleum gas |
BS 7541:1992
|
Specification for temporary protectives for the protection of metal surfaces against corrosion during transport and storage |
BS 903-1:1995
|
Physical testing of rubber Guide to the selection and use of methods of test for rubber |
BS EN 297:1994
|
Gas-fired central heating boilers. Type B11 and B11BS boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW |
BS 2751:1990
|
Specification for general purpose acrylonitrile-butadiene rubber compounds |
BS 3905:1995
|
Specification for 3.8/6.6 kV, 300 A bolted flameproof cable couplers and adaptors, for use in coal mines. |
BS 6996:1989
|
Specification for mineral oil resistant acrylonitrile-butadiene rubber compounds |
BS 5963:1981
|
Specification for electrically operated automatic gas shut-off valves |
BS 5122:1986
|
Specification for rubber hoses for low-pressure and medium-pressure saturated steam |
BS EN 2432:1995
|
Ethylene-propylene rubber (EPM/EPDM). Hardness 90 IRHD |
BS 5176:1975
|
Specification for classification system for vulcanized rubbers |
BS 4G 198-1:1997
|
Sleeves for aircraft electric cables and equipment wires Specification for elastomeric sleeves for binding and identification |
BS 6067:1981
|
Specification for multifunctional gas controls for domestic, commercial and catering appliances |
BS 5173-5:1977
|
Methods of test for hoses Chemical resistance tests |
BS 903-A34:1978
|
Methods of testing vulcanized rubber. Determination of stress relaxation of rubber rings in compression |
BS 6505:1984
|
Specification for rubber-type materials used for controls components for use with 1st, 2nd and 3rd family gases |
BS 6469:1984
|
Methods of test for insulation and sheaths of electric cables |
BS 1870-1:1988
|
Safety footwear Specification for safety footwear other than all-rubber and all-plastics moulded types |
BS 5412-5:1976
|
Specification for the performance of draw-off taps with metal bodies for water services Physio-chemical characteristics: materials, coatings |
BS 1399-2:1970
|
Specification for rotary shaft lip seals Methods of performance rating |
BS 6469:1990
|
Methods of test for insulation and sheaths of electric cables |