BS CECC22120(1993) : 1993 AMD 9196

Foreword
Preface
Section 1 - Scope
Section 2 - Mating face and gauge information
2.1 Dimensions - General purpose connectors
2.1.1 Plug
2.1.2 Socket
2.2 Gauges for general purpose connectors
2.2.1 Gauge for outer contact of plug
2.2.2 Gauge for female centre contact
2.2.3 Engagement and separation gauge for male connector
2.3 Dimensions - standard test connectors (Grade 0)
2.3.1 Test plug
2.3.2 Test socket
Section 3 - Properties
3.1 Ratings and characteristics
Section 4 - Test conditions and severities
4.1 Measurement and recovery conditions
4.2 Visual examination
4.3 Dimensions
4.3.1 Outline dimensions and mass
4.3.2 Dimensions and materials (piece-parts)
4.3.3 Gauging procedures
4.4 Electrical tests and measurements
4.4.1 Reflection factor (r)
4.4.2 Contact resistance
4.4.3 Outer conductor continuity
4.4.4 Insulation resistance
4.4.5 Voltage proof
4.4.6 Voltage proof combined with water immersion
4.4.7 RF high potential withstanding voltage
4.4.8 Screening effectiveness
4.4.9 Discharge test (corona)
4.5 Mechanical tests and measurements
4.5.1 Gauge retention force (male and female resilient
       contacts)
4.5.2 Contact captivation (without cable attached)
4.5.3 Static load
4.5.4 Mechanical tests on cable clamping device
4.5.6 Tensile strength of coupling mechanism
4.5.7 Compatibility, mechanical
4.5.9 Bending moment
4.6 Enviromental tests and measurements
4.6.1 Soldering
4.6.2 Bump
4.6.3 Vibration
4.6.4 Shock
4.6.5 Climatic tests
4.6.6 Damp heat, steady state
4.6.7 Rapid change of temperature
4.6.8 Sealing (panel and barrier sealed connectors)
4.6.9 Sealing (hermetically sealed connectors)
4.6.10 Salt mist
4.6.11 Dust
4.6.12 Industrial atmosphere test
4.7 Endurance tests
4.7.1 Mechanical endurance
4.7.2 High temperature endurance
4.8 Resistance to solvents and contaminating fluid
Section 5 - Quality assessment procedures
5.1 Test schedules and inspection requirements -
       Series BNC

Gives information and rules for the preparation of detail specifications (DS) for r.f. coaxial connectors Series BNC. Indicates the recommended performance characteristics to be considered when writing a DS and covers test schedules and inspection requirements for Assessment Levels M, H and U. Coverage includes: visual examination; electrical tests and measurements; outer conductor continuity; voltage proof combined with water immersion; mechanical tests on cable clamping device; environmental tests and measurements; industrial atmosphere test. AMD 9196 RENUMBERS THIS STANDARD