BS EN 50341-2-9 : 2017
|
OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 2-9: NATIONAL NORMATIVE ASPECTS (NNA) FOR GREAT BRITAIN AND NORTHERN IRELAND (BASED ON EN 50341-1:2012) |
05/30136143 DC : DRAFT JUL 2005
|
BS 5628-2 - CODE OF PRACTICE FOR THE USE OF MASONRY - PART 2: STRUCTURAL USE OF REINFORCED AND PRESTRESSED MASONRY |
BS 7861-1:1996
|
Strata reinforcement support system components used in coal mines Specification for rockbolting |
BS 6084-1:1997
|
Methods for the evaluation of prefabrication primers Rating and weldability tests |
BS 6779-3:1994
|
Highway parapets for bridges and other structures Specification for vehicle containment parapets of combined metal and concrete construction |
DEFSTAN 02-117/2(2002) : 2002
|
REQUIREMENTS FOR ANCHORING, BERTHING, TOWING AND SECURING TO A BUOY CATEGORY 2 |
06/30139507 DC : DRAFT MAY 2006
|
BS 1722-9 - FENCES - PART 9: SPECIFICATION FOR MILD STEEL (LOW CARBON STEEL) FENCES WITH ROUND OR SQUARE VERTICALS AND FLAT HORIZONTALS |
06/30094362 DC : DRAFT JAN 2006
|
BS 4592-2 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 2: EXPANDED METAL GRATINGS - SPECIFICATION |
06/30094360 DC : DRAFT JAN 2006
|
BS 4592-1 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 1: METAL OPEN BAR GRATINGS - SPECIFICATION |
DEFSTAN 02-738/1(2000) : 2000
|
METALS AND CORROSION GUIDE |
PD 5500:2000
|
SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
BS 1722-2:2000
|
Fences Specification for strained wire and wire mesh netting fences |
BS 7430:1998
|
Code of practice for earthing |
BS 8004:2015
|
Code of practice for foundations |
BS 8002:2015
|
Code of practice for earth retaining structures |
BS 1722-12:1999
|
Fences Specification for steel palisade fences |
BS 4211:1994
|
Specification for ladders for permanent access to chimneys, other high structures, silos and bins |
BS 1722-14:2001
|
Fences Specification for open mesh steel panel fences |
BS 5400-3:2000
|
Steel, concrete and composite bridges Code of practice for design of steel bridges |
BS 1722-8:1997
|
Fences Specification for mild steel (low carbon steel) continuous bar fences and hurdles |
ENA TS 43-97 : ISSUE 1 AMD 1 1996
|
STEEL SUPPORTS FOR SINGLE CIRCUIT 132kV OVERHEAD LINES |
EEMUA 197 : 1999
|
SPECIFICATION FOR FABRICATION OF NON-PRIMARY STRUCTURAL STEELWORK FOR OFFSHORE INSTALLATIONS |
DEFSTAN 95-24/2(2002) : 2002
|
ARMOUR PLATE, STEEL (3-160 MM) |
15/30301520 DC : 0
|
BS 8004 - CODE OF PRACTICE FOR FOUNDATIONS (FORMERLY CP 2004) |
06/30094368 DC : DRAFT JAN 2006
|
BS 4592-5 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 5: SOLID PLATES IN METAL AND GLASS REINFORCED PLASTICS (GRP) - SPECIFICATION |
DEFSTAN 81-86/2(2000) : 2000 CORR 2000
|
METAL FITTINGS FOR WOODEN CONTAINERS |
BS 7670-2:1997
|
Steel nuts and bolts for resistance projection welding Specification for welding of weld nuts and weld bolts |
DEFSTAN 95-24/1(2000) : 2000
|
ARMOUR PLATE, STEEL (3-160 MM) |
DEFSTAN 07-288/2(2017) : 2017
|
SPECIFICATION FOR THE TYPE 'PD' AND SUPER 'D' MOUNTS |
BS 5950-6(1995) : 1995
|
STRUCTURAL USE OF STEELWORK IN BUILDING - PART 6: CODE OF PRACTICE FOR DESIGN OF LIGHT GAUGE PROFILED STEEL SHEETING |
02/703583 DC : DRAFT FEB 2002
|
BS 7668 - WELDABLE STRUCTURAL STEELS - HOT FINISHED STRUCTURAL HOLLOW SECTIONS IN WEATHER RESISTANT STEELS |
CEI EN 50341-2-9 : 2016
|
OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 2-9: NATIONAL NORMATIVE ASPECTS (NNA) FOR GREAT BRITAIN AND NORTHERN IRELAND |
EN 50341-2-9:2017
|
Overhead electrical lines exceeding AC 1 kV - Part 2-9: National Normative Aspects (NNA) for Great Britain and Northern Ireland (based on EN 50341-1:2012) |
BS EN 286-2:1992
|
Simple unfired pressure vessels designed to contain air or nitrogen Specification for pressure vessels for air braking and auxiliary systems for motor vehicles and their trailers |
BS 6651:1999
|
Code of practice for protection of structures against lightning |
BS 4592-5:2006
|
Industrial type flooring and stair treads Solid plates in metal and glass reinforced plastics (GRP). Specification |
BS 5628-3:2001
|
Code of practice for use of masonry Materials and components, design and workmanship |
BS 5950-5:1998
|
STRUCTURAL USE OF STEELWORK IN BUILDING - PART 5: CODE OF PRACTICE FOR DESIGN OF COLD FORMED THIN GAUGE SECTIONS |
BS 5276-2:2003
|
Pressure vessel details (dimensions) Specification for saddle supports for horizontal cylindrical pressure vessels |
BS 6180:1999
|
Barriers in and about buildings. Code of practice |
BS 5950-2:1992
|
Structural use of steelwork in building Specification for materials, fabrication and erection: hot-rolled sections |
BS 6510:2005
|
Steel-framed windows and glazed doors |
PD 5500:2003
|
Specification for unfired fusion welded pressure vessels |
BS PAS 68(2007) : 2007
|
SPECIFICATION FOR VEHICLE SECURITY BARRIERS |
BS 2654:1989
|
Specification for manufacture of vertical steel welded non-refrigerated storage tanks with butt-welded shells for the petroleum industry |
BS 4592-1:1995
|
Industrial type flooring, walkways and stair treads Specification for open bar gratings |
BS 5169:1992
|
Specification for fusion welded steel air receivers |
BS 4592-1:2006
|
Industrial type flooring and stair treads Metal open bar gratings. Specification |
BS 1722-9:2000
|
Fences Specification for mild steel (low carbon steel) fences with round or square verticals and flat horizontals |
BS 5950-2:2001
|
STRUCTURAL USE OF STEELWORK IN BUILDING - PART 2: SPECIFICATION FOR MATERIALS, FABRICATION AND ERECTION - ROLLED AND WELDED SECTIONS |
BS 4092-1:1996
|
Specification for domestic front entrance gates Specification for metal gates |
BS 5950-1:2000
|
STRUCTURAL USE OF STEELWORK IN BUILDING - PART 1: CODE OF PRACTICE FOR DESIGN - ROLLED AND WELDED SECTIONS |
BS 4074:2000
|
Specification for steel trench struts |
BS 6180:1995
|
Code of practice for barriers in and about buildings |
BS 6779-1:1998
|
Highway parapets for bridges and other structures Specification for vehicle containment parapets of metal construction |
BS 227:1995
|
Specification for H-section steel arches for use in mines |
ENA TS 43-96 : ISSUE 2 COR 1 1996
|
FASTENERS AND WASHERS FOR WOOD POLE OVERHEAD LINES |
ENA TS 43-11 : ISSUE 1 AMD 1 1996
|
400 KV STEEL TOWER TRANSMISSION LINES - SPECIFICATION L.12 (2 X 700 MM[2] AAAC PER PHASE) (1 X 425 MM[2] AAAC EARTH WIRE) |
BS 8002:1994
|
Code of practice for earth retaining structures |
06/30139509 DC : DRAFT MAY 2006
|
BS 1722-10 - FENCES - PART 10: SPECIFICATION FOR ANTI-INTRUDER FENCES IN CHAIN LINK AND WELDED MESH |
BS 9124:2008
|
Specification for steel and aluminium access cover systems with over 1 m clear opening |
06/30094364 DC : DRAFT JAN 2006
|
BS 4592-3 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 3: COLD FORMED METAL PLANKS - SPECIFICATION |
BS 4592-5:1995
|
Industrial type flooring, walkways and stair treads Specification for solid plates in steel, aluminium and glass reinforced plastics |
DEFSTAN 02-327/2(2001) : INTERIM
|
REQUIREMENTS AND GUIDANCE FOR THE PROCUREMENT OF PUMPS FOR AUXILIARY SYSTEMS |
PD 7974-3:2003
|
Application of fire safety engineering principles to the design of buildings Structural response and fire spread beyond the enclosure of origin (Sub-system 3) |
BS 5950-7:1992
|
STRUCTURAL USE OF STEELWORK IN BUILDING - SPECIFICATION FOR MATERIALS AND WORKMANSHIP: COLD FORMED SECTIONS |
BS 7818:1995
|
Specification for pedestrian restraint systems in metal |
ENA TS 43-3 : ISSUE 1 AMD 1 1996
|
DESIGN OF LATTICE STEEL TRANSMISSION TOWERS FOR OVERHEAD LINES AT 132 KV AND HIGHER VOLTAGES |
DD ENV 1090-1:1998
|
Execution of steel structures General rules and rules for buildings (together with United Kingdom national application document) |
15/30301518 DC : 0
|
BS 8002 - CODE OF PRACTICE FOR EARTH RETAINING STRUCTURES |
04/30100932 DC : DRAFT AUG 2004
|
BS 6510 - STEEL-FRAMED WINDOWS AND GLAZED DOORS |
BS 7777-2:1993
|
Flat-bottomed, vertical, cylindrical storage tanks for low temperature service Specification for the design and construction of single, double and full containment metal tanks for the storage of liquefied gas at temperatures down to -165°C |
BS EN 286-3:1995
|
Simple unfired pressure vessels designed to contain air or nitrogen Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
I.S. EN 50341-2-9:2017
|
OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 2-9: NATIONAL NORMATIVE ASPECTS (NNA) FOR GREAT BRITAIN AND NORTHERN IRELAND (BASED ON EN 50341-1:2012) |
07/30151811 DC : 0
|
BS 9124 - SPECIFICATION FOR STEEL AND ALUMINIUM ACCESS COVER SYSTEMS WITH OVER 1M CLEAR OPENING |
BS PAS 68(2005) : 2005
|
SPECIFICATION FOR VEHICLE SECURITY BARRIERS - FIXED BOLLARDS |
05/30131954 DC : DRAFT APR 2005
|
BS 5628-3 - CODE OF PRACTICE FOR THE USE OF MASONRY - PART 3: MATERIALS AND COMPONENTS, DESIGN AND WORKMANSHIP |
BS 8006:1995
|
Code of practice for strengthened/reinforced soils and other fills |
BS EN 286-4:1995
|
Simple unfired pressure vessels designed to contain air or nitrogen Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
BS 1722-10:1999
|
Fences Specification for anti-intruder fences in chain link and welded mesh |
BS 5975:1996
|
Code of practice for falsework |
BS 5400-6:1999
|
STEEL, CONCRETE AND COMPOSITE BRIDGES - PART 6: SPECIFICATION FOR MATERIALS AND WORKMANSHIP, STEEL |