Skip to content
Please enter a keyword to search

  • BS EN 10029:2010

    Current The latest, up-to-date edition.

    Hot-rolled steel plates 3 mm thick or above. Tolerances on dimensions and shape

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  31-01-2012

    Publisher:  British Standards Institution

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Information to be supplied by the purchaser
    5 Form of supply
    6 Tolerances on dimensions
    7 Tolerances on shape
    8 Measurement
    Annex A (informative) - List of product standards
            where dimensional standard EN 10029 is
            applied

    Abstract - (Show below) - (Hide below)

    Defines tolerances on dimensions and shape for hot-rolled non-alloy and alloy steel plates.

    Scope - (Show below) - (Hide below)

    This European Standard specifies tolerances on dimensions and shape for hot-rolled non-alloy and alloy steel plates with the following characteristics: Nominal thickness: 3 mm ≤ t ≤ 400 mm; Nominal width: w ≥ 600 mm. Tolerances for products of width w < 600 mm cut or slit from plate should be agreed between manufacturer and purchaser at the time of enquiry and order. This European Standard applies, but is not limited, to steel grades defined in EN 10025-2 to EN 10025-6:2004+A1:2009, EN 10028-2 to EN 10028-6, EN 10083-2 and EN 10083-3, EN 10084, EN 10085, EN 10149-2 and EN 10149-3, EN 10207 and EN 10225 (see also Annex A). It does not apply to stainless steels. This European Standard does not include round plates, custom-made plates, chequer or bulb plate for flooring and wide flats.

    General Product Information - (Show below) - (Hide below)

    Committee ISE/103
    Development Note Supersedes BS 1501-3(1990), BS 1501-1(1980) and BS 1501-2(1988). Supersedes 89/42222 DC. (07/2003) Together with BS 7613(1994), BS 7668(1994), BS EN 10113-1, BS EN 10113-2, BS EN 10113-3, BS EN 10155 and BS EN 10210-1, supersedes BS 4360(1990). (07/2005) Together with BS EN 10051, BS EN 10048, BS EN 10088-2 and BS EN 10095, supersedes BS 1449-2(1983). (02/2008) Supersedes 09/30156692 DC. (12/2010)
    Document Type Standard
    Publisher British Standards Institution
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    03/300415 DC : DRAFT JAN 2003 BS XXXX - MECHANICAL DESIGN AND POWER REQUIREMENTS FOR TROUGHED BELT CONVEYORS
    15/30270868 DC : DRAFT FEB 2015 BS 6635 - MANUFACTURE OF SADDLE TREES MADE FROM WOOD - SPECIFICATION
    PD 5500:2000 SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS
    BS 6635:2015 Manufacture of saddle trees made from wood. Specification
    BS 6635:2003 Manufacture of saddle trees made from wood. Specification
    DEFSTAN 95-24/2(2002) : 2002 ARMOUR PLATE, STEEL (3-160 MM)
    07/30160560 DC : DRAFT JAN 2007 PD 5500 AMD 2 - SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS
    DEFSTAN 95-24/3(2004) : 2004 ARMOUR PLATE, STEEL (3-160 MM)
    04/30085945 DC : DRAFT NOV 2004 BS 1703 - REFUSE CHUTES AND HOPPERS - SPECIFICATION
    DEFSTAN 95-24/1(2000) : 2000 ARMOUR PLATE, STEEL (3-160 MM)
    BS PD5500(2015) : 2015 SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS
    BS 7608(2014) : 2014 GUIDE TO FATIGUE DESIGN AND ASSESSMENT OF STEEL PRODUCTS
    BS 6180:1999 Barriers in and about buildings. Code of practice
    BS PD5500(2009) : 2009 SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS
    PD 5500:2003 Specification for unfired fusion welded pressure vessels
    BS 2654:1989 Specification for manufacture of vertical steel welded non-refrigerated storage tanks with butt-welded shells for the petroleum industry
    BS 5169:1992 Specification for fusion welded steel air receivers
    BS 6180:2011 Barriers in and about buildings. Code of practice
    BS PD5500(2018) : 2018 SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS
    BS PD5500(2006) : 2006 SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS
    BS 6349-1:2000 Maritime structures Code of practice for general criteria
    BS 5950-2:2001 STRUCTURAL USE OF STEELWORK IN BUILDING - PART 2: SPECIFICATION FOR MATERIALS, FABRICATION AND ERECTION - ROLLED AND WELDED SECTIONS
    BS 5834-2:2011 Surface boxes, guards and underground chambers for the purposes of utilities Specification for surface boxes
    BS 1501-1:1980 Steels for pressure purposes Specification for carbon and carbon manganese steels: plates
    BS 6180:1995 Code of practice for barriers in and about buildings
    BS PD5500(2012) : 2012 SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS
    BS 4485-4:1996 Water cooling towers Code of practice for structural design and construction
    DEFSTAN 02-329/3(2010) : 2010 REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES
    07/30016130 DC : 0 BS 5974 - CODE OF PRACTICE FOR THE PLANNING, DESIGN, SETTING UP AND USE OF TEMPORARILY INSTALLED SUSPENDED ACCESS EQUIPMENT
    BS 7613:1994 Specification for hot rolled quenched and tempered weldable structural steel plates
    DEFSTAN 02-320/4(2015) : 2015 REQUIREMENTS FOR THE DESIGN AND INSTALLATION OF FUEL SYSTEMS FOR GAS TURBINE ENGINES AND DIESEL ENGINES IN HM SURFACE SHIPS AND SUBMARINES
    DEFSTAN 02-121(PT1)/4(2017) : 2017 REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES (CATEGORY 2) - PART 1: COMMON REQUIREMENTS
    DEFSTAN 02-121(PT1)/3(2010) : 2010 REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - PART 1: COMMON REQUIREMENTS
    BS 1703:2005 Refuse chutes and hoppers. Specification
    DEFSTAN 02-728/3(2010) : 2010 REQUIREMENTS FOR DOMESTIC HOT AND COLD FRESH WATER SYSTEMS
    13/30102062 DC : 0 BS 7608:2013 - GUIDE TO FATIGUE DESIGN AND ASSESSMENT OF STEEL PRODUCTS
    10/30212801 DC : 0 BS 6180 - BARRIERS IN AND ABOUT BUILDINGS - CODE OF PRACTICE
    16/30353337 DC : 0 PD 5500:2015+A3 - SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS
    DEFSTAN 02-305/2(2003) : 2003 REQUIREMENTS FOR GEARING - MAIN PROPULSION
    DEFSTAN 02-329/4(2015) : 2015 REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES
    DEFSTAN 02-320/3(2009) : 2009 REQUIREMENTS FOR THE DESIGN AND INSTALLATION OF FUEL SYSTEMS FOR GAS TURBINE ENGINES AND DIESEL ENGINES IN HM SURFACE SHIPS AND SUBMARINES
    DEFSTAN 02-320/2(2002) : INTERIM REQUIREMENTS FOR THE DESIGN AND INSTALLATION OF FUEL SYSTEMS FOR GAS TURBINE ENGINES AND DIESEL ENGINES IN HM SURFACE SHIPS AND SUBMARINES
    DEFSTAN 02-121(PT1)/2(2006) : 2006 REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - PART 1: COMMON REQUIREMENTS
    DEFSTAN 02-305/3(2010) : 2010 REQUIREMENTS FOR GEARING - MAIN PROPULSION
    DEFSTAN 02-329/2(2005) : 2005 REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES
    BS 5400-3:2000 Steel, concrete and composite bridges Code of practice for design of steel bridges
    BS 493(1995) : 1995 SPECIFICATION FOR AIRBRICKS AND GRATINGS FOR WALL VENTILATION
    BS 5975:1996 Code of practice for falsework
    BS 5400-6:1999 STEEL, CONCRETE AND COMPOSITE BRIDGES - PART 6: SPECIFICATION FOR MATERIALS AND WORKMANSHIP, STEEL

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 10079:2007 Definition of steel products
    EN 10025-4:2004 Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
    EN 10085:2001 Nitriding steels - Technical delivery conditions
    EN 10028-3:2017 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
    EN 10028-6:2017 Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered
    EN 10149-2:2013 Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled steels
    EN 10028-2:2017 Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
    EN 10163-2:2004 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats
    EN 10207:2017 Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars
    EN 10163-1:2004/AC:2007 DELIVERY REQUIREMENTS FOR SURFACE CONDITION OF HOT-ROLLED STEEL PLATES, WIDE FLATS AND SECTIONS - PART 1: GENERAL REQUIREMENTS
    EN 10028-5:2017 Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
    EN 10025-5:2004 Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
    EN 10025-2:2004/AC:2005 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
    EN 10083-2:2006 Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels
    EN 10025-6:2004+A1:2009 Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
    EN 10225:2009 Weldable structural steels for fixed offshore structures - Technical delivery conditions
    EN 10084:2008 Case hardening steels - Technical delivery conditions
    EN 10028-4:2017 Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
    EN 10025-3:2004 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
    EN 10083-3:2006/AC:2008 STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
    EN 10149-3:2013 Hot rolled flat products made of high yield strength steels for cold forming - Part 3: Technical delivery conditions for normalized or normalized rolled steels
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective