BS EN 10149-2:2013
Current
The latest, up-to-date edition.
Hot rolled flat products made of high yield strength steels for cold forming Technical delivery conditions for thermomechanically rolled steels
Hardcopy , PDF
English
30-09-2013
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Information to be supplied by the purchaser
5 Dimensions, mass and tolerances
6 Classification and designation
7 Technical requirements
8 Inspection and testing
9 Marking
10 Disputes
11 Options
Annex A (normative) - Location of test pieces
Annex B (informative) - Minimum inside bend radii for
cold forming
Bibliography
Describes requirements for flat products made of weldable, hot-rolled, high yield strength steels for cold forming.
| Committee |
ISE/103
|
| DevelopmentNote |
Supersedes BS 1449-1.4(1991) (07/2004) Supersedes BS 1449-1.10(1991) and 93/307663 DC. (07/2005) Supersedes 11/30239494 DC. (10/2013)
|
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This European Standard, in addition to EN10149-1, specifies requirements for flat products made of weldable, hot-rolled, high yield strength steels for cold forming.
The grades are given in Table1 (chemical composition) and Table2 (mechanical properties) and are supplied in the thermomechanically rolled delivery condition as given in 7.2.
The steels specified in this European Standard are applicable to hot-rolled flat products in the thickness range of:
1,5mm to 20mm for the steels which have a specified minimum yield strength of 315MPa 1) up to and including 460MPa1);
1,5mm to 16mm for the steels which have a specified minimum yield strength of 500MPa1) up to and including 700MPa1); and
from 2mm up to 10mm for the steels with a minimum yield stress in the range from 900MPa1) to 960MPa1).
| Standards | Relationship |
| EN 10149-2:2013 | Identical |
| NF EN 10149-2 : 2013 | Identical |
| UNE-EN 10149-2:2014 | Identical |
| NS EN 10149-2 : 2013 | Identical |
| I.S. EN 10149-2:2013 | Identical |
| NEN EN 10149-2 : 2013 | Identical |
| UNI EN 10149-2 : 2013 | Identical |
| NBN EN 10149-2 : 2013 | Identical |
| SN EN 10149-2 : 2013 | Identical |
| BS 5950-6(1995) : 1995 | STRUCTURAL USE OF STEELWORK IN BUILDING - PART 6: CODE OF PRACTICE FOR DESIGN OF LIGHT GAUGE PROFILED STEEL SHEETING |
| BS 5950-5:1998 | Structural use of steelwork in building Code of practice for design of cold formed thin gauge sections |
| EN 10051:2010 | Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape |
| EN 10149-1:2013 | Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions |
| EN 10029:2010 | Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape |
| EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| EN 10020:2000 | Definition and classification of grades of steel |
| CEN/TR 10347:2006 | Guidance for forming of structural steels in processing |
| ISO 14713-2:2009 | Zinc coatings Guidelines and recommendations for the protection against corrosion of iron and steel in structures Part 2: Hot dip galvanizing |
| EN ISO 14713-2:2009 | Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2: Hot dip galvanizing (ISO 14713-2:2009) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.