Skip to content
Please enter a keyword to search

  • BS EN 10210-1:2006

    Current The latest, up-to-date edition.

    Hot finished structural hollow sections of non-alloy and fine grain steels Technical delivery requirements

    Available format(s):  Hardcopy

    Language(s):  English

    Published date:  31-05-2006

    Publisher:  British Standards Institution

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Scope
    2 Normative references
    3 Terms, definitions and symbols
       3.1 Terms and definitions
       3.2 Symbols
    4 Classification and designation
       4.1 Classification
       4.2 Designation
    5 Information to be obtained by the manufacturer
       5.1 Mandatory information
       5.2 Options
       5.3 Example of an order
    6 Requirements
       6.1 General
       6.2 Steel manufacturing process
       6.3 Structural hollow section manufacturing process
       6.4 Delivery condition
       6.5 Chemical composition
       6.6 Mechanical properties
       6.7 Technological properties
       6.8 Surface condition
       6.9 Non-destructive testing of welds
       6.10 Tolerances and mass
    7 Inspection
       7.1 Types of inspection
       7.2 Types of inspection document
       7.3 Summary of inspection
    8 Sampling
       8.1 Frequency of tests
       8.2 Preparation of samples and test pieces
    9 Test methods
       9.1 Chemical analysis
       9.2 Mechanical tests
       9.3 Visual inspection and dimensional check
       9.4 Non-destructive testing
       9.5 Retests, sorting and reprocessing
    10 Marking
    11 Evaluation of conformity
    Annex A (normative) Structural hollow sections of non-alloy
                            quality steels - Chemical composition
                            and mechanical properties
    Annex B (normative) Structural hollow sections of fine grain
                            steels - Chemical composition and
                            mechanical properties
    Annex C (normative) Location of samples and test pieces
    Annex D (normative) Evaluation of conformity
    Annex ZA (informative) Clauses of this European Standard
                            addressing the provisions of the
                            EU Construction Products Directive
    Bibliography

    Abstract - (Show below) - (Hide below)

    This revision permits the publication of BS EN 10210-1 to be adopted as a Harmonised Standard under the Constuction Products Directive (CPD) 89/106/EC - Structural metallic products. Work on the Standard has been undertaken with the guidance of the CEN Consultant. The revision has introduced changes to the scope by adding an additional steel grade for S420 square and rectangular sections, the normative reference and aligns the production processes and the technical requirements between two parallel products (BS EN 10210-1 and BS EN 10219-1).

    General Product Information - (Show below) - (Hide below)

    Committee ISE/103
    Development Note Together with BS 7668(1994), BS 7613(1994), BS EN 10113-1, BS EN 10113-2, BS EN 10113-3, BS EN 10155 and BS EN 10029 supersedes BS 4360(1990). Supersedes 90/47916 DC. (07/2005) Supersedes 03/103468 DC (05/2006)
    Document Type Standard
    Publisher British Standards Institution
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    16/30338305 DC : 0 BS 7668 - WELDABLE STRUCTURAL STEELS - HOT FINISHED STRUCTURAL HOLLOW SECTIONS IN WEATHER RESISTANT STEELS - SPECIFICATION
    BS 1722-1:2006 Fences Specification for chain link fences
    EN 10113-2 : 1993 HOT-ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS - DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED STEELS
    BS 1722-2:2000 Fences Specification for strained wire and wire mesh netting fences
    EN 10113-3 : 1993 HOT ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS - DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED STEELS
    BS 1722-14:2017 Fences Specification for open mesh steel panel
    BS 7668:2004 Weldable structural steels. Hot finished structural hollow sections in weather resistant steels. Specification
    BS 1722-14:2006 Fences Specification for open mesh steel panel fences
    BS 7668:2016 Weldable structural steels. Hot finished structural hollow sections in weather resistant steels. Specification
    BS 1722-12:2016 Fences Steel palisade fences. Manufacturing and installation. Specification
    BS 1722-12:1999 Fences Specification for steel palisade fences
    BS 1722-14:2001 Fences Specification for open mesh steel panel fences
    BS 1722-12:2006 Fences Specification for steel palisade fences
    BS 1722-8:2006 Fences Specification for mild steel (low carbon steel) continuous bar fences and hurdles
    02/703583 DC : DRAFT FEB 2002 BS 7668 - WELDABLE STRUCTURAL STEELS - HOT FINISHED STRUCTURAL HOLLOW SECTIONS IN WEATHER RESISTANT STEELS
    PD 7974-3:2011 Application of fire safety engineering principles to the design of buildings Structural response and fire spread beyond the enclosure of origin
    BS 6349-1:2000 Maritime structures Code of practice for general criteria
    BS 5950-2:2001 STRUCTURAL USE OF STEELWORK IN BUILDING - PART 2: SPECIFICATION FOR MATERIALS, FABRICATION AND ERECTION - ROLLED AND WELDED SECTIONS
    BS 5834-2:2011 Surface boxes, guards and underground chambers for the purposes of utilities Specification for surface boxes
    BS 5950-1:2000 STRUCTURAL USE OF STEELWORK IN BUILDING - PART 1: CODE OF PRACTICE FOR DESIGN - ROLLED AND WELDED SECTIONS
    BS 4074:2000 Specification for steel trench struts
    BS 6779-1:1998 Highway parapets for bridges and other structures Specification for vehicle containment parapets of metal construction
    BS PAS 170-1(2017) : 2017 VEHICLE SECURITY BARRIERS - LOW SPEED IMPACT TESTING - PART 1: TROLLEY IMPACT TEST METHOD FOR BOLLARDS
    07/30016130 DC : 0 BS 5974 - CODE OF PRACTICE FOR THE PLANNING, DESIGN, SETTING UP AND USE OF TEMPORARILY INSTALLED SUSPENDED ACCESS EQUIPMENT
    BS 9124:2008 Specification for steel and aluminium access cover systems with over 1 m clear opening
    BS EN 10113-2:1993 Hot-rolled products in weldable fine grain structural steels Delivery conditions for normalized/normalized rolled steels
    EEMUA 105 : 2014 FACTORY STAIRWAYS, LADDERS AND HANDRAILS (INCLUDING ACCESS PLATFORMS AND RAMPS)
    09/30168197 DC : 0 BS 8102 - CODE OF PRACTICE FOR PROTECTION OF STRUCTURES FROM WATER FROM THE GROUND
    17/30341308 DC : DRAFT JUNE 2017 BS 1722-14 - FENCES - PART 14: SPECIFICATION FOR OPEN MESH STEEL PANEL
    07/30151811 DC : 0 BS 9124 - SPECIFICATION FOR STEEL AND ALUMINIUM ACCESS COVER SYSTEMS WITH OVER 1M CLEAR OPENING
    16/30325063 DC : 0 BS 1722-12 - FENCES - PART 12: STEEL PALISADE FENCES - MANUFACTURING AND INSTALLATION - SPECIFICATION
    BS EN 10113-3:1993 Hot-rolled products in weldable fine grain structural steels Delivery conditions for thermomechanical rolled steels
    BS 1722-10:2006 Fences Specification for anti-intruder fences in chain link and welded mesh
    BS 1722-2:2006 Fences Specification for strained wire and wire mesh netting fences
    BS 1722-10:1999 Fences Specification for anti-intruder fences in chain link and welded mesh
    BS 1722-1:1999 Fences Specification for chain link fences
    BS 5975:1996 Code of practice for falsework
    BS 5400-6:1999 STEEL, CONCRETE AND COMPOSITE BRIDGES - PART 6: SPECIFICATION FOR MATERIALS AND WORKMANSHIP, STEEL

    Standards Referencing This Book - (Show below) - (Hide below)

    93/68/EEC : 1993 AMD 2 1998 COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC
    EN ISO 14284:2002 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
    EN 10002-1 : 2001 METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
    EN 10052:1993 Vocabulary of heat treatment terms for ferrous products
    CR 10261 : 1995 ECISS INFORMATION CIRCULAR 11 - IRON AND STEEL - REVIEW OF AVAILABLE METHODS OF CHEMICAL ANALYSIS
    EN 10027-2:2015 DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
    EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
    EN ISO 643:2012 Steels - Micrographic determination of the apparent grain size (ISO 643:2012)
    89/106/EEC : 1988 COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS
    EN 10256:2000 Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2 non-destructive testing personnel
    EN 1011-1:2009 Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding
    EN 10168:2004 Steel products - Inspection documents - List of information and description
    EN ISO 2566-1:1999 Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984)
    EN 473:2008 Non-destructive testing - Qualification and certification of NDT personnel - General principles
    EN 1011-2:2001/A1:2003 WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 2: ARC WELDING OF FERRITIC STEELS
    EN 10210-2:2006/AC:2007 HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 2: TOLERANCES, DIMENSIONS AND SECTIONAL PROPERTIES
    EN 10045-1 : 1990 METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD
    ISO 15614-1:2017 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
    ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding
    EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
    EN 10021:2006 General technical delivery conditions for steel products
    EN 10246-10:2000 Non-destructive testing of steel tubes - Part 10: Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections
    ISO 2566-1:1984 Steel Conversion of elongation values Part 1: Carbon and low alloy steels
    EN 10204:2004 Metallic products - Types of inspection documents
    EN 10246-9:2000 Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections
    EN 10025-2:2004/AC:2005 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
    ISO 9001:2015 Quality management systems — Requirements
    EN ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
    ISO 643:2012 Steels Micrographic determination of the apparent grain size
    EN 10246-3:1999 Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
    EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
    EN 10020:2000 Definition and classification of grades of steel
    ISO 15607:2003 Specification and qualification of welding procedures for metallic materials General rules
    EN 10266:2003 Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards
    EN 10025-3:2004 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
    ISO 377:2017 Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
    ISO 14284:1996 Steel and iron — Sampling and preparation of samples for the determination of chemical composition
    EN 10246-8:1999 Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections
    EN ISO 15607:2003 Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003)
    EN 1993-1-1:2005/A1:2014 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
    EN 287-1:2011 Qualification test of welders - Fusion welding - Part 1: Steels
    EN 10246-5 : 1999 NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 5: AUTOMATIC FULL PERIPHERAL MAGNETIC TRANSDUCER/FLUX LEAKAGE TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC WELDED) FERROMAGNETIC STEEL TUBES FOR THE DETECTION OF LONGITUDINAL IMPERFECTIONS
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective