BS EN 1062-1:2004
Current
The latest, up-to-date edition.
Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete Classification
Hardcopy , PDF
English
17-06-2007
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Description
4.1 Description by chemical type of binder
4.2 Description by the state of dissolution or
dispersion of the binder in the coating material
5 Classification
5.1 General
5.2 Gloss
5.3 Dry film thickness
5.4 Grain size
5.5 Water vapour transmission rate
5.6 Liquid water permeability
5.7 Crack-bridging
5.8 Carbon dioxide permeability
6 Designation code
Annex A (informative) Guide to selection of coatings
A.1 Introduction
A.2 Scope
A.3 Selection of coatings
A.4 Suitability factors
A.4.1 Substrate factors
A.4.2 Architectural factors
A.4.3 Environmental factors
A.4.4 Durability factors
A.4.5 Specification factors
A.5 Coating properties and characteristics
A.5.1 Classification
A.5.2 Special requirements for coating systems for
exterior masonry and concrete
A.6 Coating application: basic principles
A.6.1 General
A.6.2 Conditions of use
Specifies a general system for the description of coating materials and coating systems for the preservation, decoration and protection of exterior new and old, coated or uncoated masonry and concrete.
| Committee |
STI/28
|
| DevelopmentNote |
Supersedes 02/123275 DC. (06/2004)
|
| DocumentType |
Standard
|
| Pages |
20
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN EN 1062-1 : 2004 | Identical |
| I.S. EN 1062-1:2004 | Identical |
| NS EN 1062-1 : 2ED 2004 | Identical |
| EN 1062-1:2004 | Identical |
| NF EN 1062-1 : 2004 | Identical |
| DIN EN 1062-1:2004-08 | Identical |
| UNI EN 1062-1 : 2005 | Identical |
| UNE-EN 1062-1:2005 | Identical |
| NBN EN 1062-1 : 2004 | Identical |
| SN EN 1062-1 : 2004 | Identical |
| 05/30095368 DC : DRAFT FEB 2005 | BS 6150 - PAINTING OF BUILDINGS - CODE OF PRACTICE |
| BS 6150(2006) : 2006 | PAINTING OF BUILDINGS - CODE OF PRACTICE |
| ISO 7783-2:1999 | Paints and varnishes Coating materials and coating systems for exterior masonry and concrete Part 2: Determination and classification of water-vapour transmission rate (permeability) |
| EN ISO 787-18:1995 | General methods of test for pigments and extenders - Part 18: Determination of residue on sieve - Mechanical flushing procedure (ISO 787-18:1983) |
| ISO 3233:1998 | Paints and varnishes Determination of percentage volume of non-volatile matter by measuring the density of a dried coating |
| EN 971-1 : 1996 | PAINTS AND VARNISHES - TERMS AND DEFINITIONS FOR COATING MATERIALS - PART 1: GENERAL TERMS |
| EN ISO 1524:2013 | Paints, varnishes and printing inks - Determination of fineness of grind (ISO 1524:2013) |
| ISO 787-7:2009 | General methods of test for pigments and extenders — Part 7: Determination of residue on sieve — Water method — Manual procedure |
| ISO 787-18:1983 | General methods of test for pigments and extenders — Part 18: Determination of residue on sieve — Mechanical flushing procedure |
| EN 1062-6:2002 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 6: Determination of carbon dioxide permeability |
| EN ISO 7783-2:1999 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 2: Determination and classification of water-vapour transmission rate (permeability) (ISO 7783-2:1999) |
| ISO 1524:2013 | Paints, varnishes and printing inks Determination of fineness of grind |
| EN 1062-3:2008 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 3: Determination of liquid water permeability |
| ISO 2813:2014 | Paints and varnishes — Determination of gloss value at 20°, 60° and 85° |
| EN 1062-7:2004 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 7: Determination of crack bridging properties |
| EN ISO 2813:2014 | Paints and varnishes - Determination of gloss value at 20°, 60° and 85° (ISO 2813:2014) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.