BS EN 1113:2008+A1:2011

This European Standard specifies: the dimensional, leaktightness, mechanical and hydraulic characteristics with which shower hoses shall comply; the procedures for testing these characteristics. This European Standard applies to shower hoses of any material used for ablutionary purposes and intended for equipping and supplementing sanitary tapware for baths and showers. This European Standard applies to shower hoses connected downstream of the obturator of the tapware. Hoses which are an integral part of sanitary tapware (sink and wash basin mixing valves) or hoses intended to connect sanitary tapware to the water supplies are not covered by this European Standard. Details of pressures and temperatures are given in Table 1. Table 1 — Conditions of use/Classifications Water Supply system Operating range of shower hoses Flow rates Limits Recommended See Table 3 Type 1 see Figure 1 Dynamic Pressure 0,05 MPa to 0,5 MPa 0,5 bar to 5 bar Dynamic Pressure (0,1 to 0,3) MPa (1,0 to 3,0) bar Min. 0,42 l/s (25,2 l/min) at 0,3 + 0,02 MPa (3 + 0,2 bar) Type 2 see Figure 2 Dynamic Pressure (0,01 to 0,2) MPa (0,1 to 2) bar Dynamic Pressure (0,02 to 0,10) MPa (0,2 to 1,0) bar Class E 0,06 l/s ˂ Q ˂ 0,18 l/s (3,6 l/min ˂ Q ˂ 10,8 l/min.) at 0,01 MPa (0,1 bar) Class H 0,18 l/s ≤ Q (10,8 l/min ≤ Q) at 0,01 MPa (0,1 bar) Temperature T ≤ 70°C T ≤ 42°C