BS EN 12053 : 2001
Current
The latest, up-to-date edition.
SAFETY OF INDUSTRIAL TRUCKS - TEST METHODS FOR MEASURING NOISE EMISSIONS
Hardcopy , PDF
English
01-01-2001
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
3.1 A-weighted emission sound pressure level at the operator's
position for the operational cycle L[pAZ]
3.2 A-weighted sound power level in an operational cycle L[WAZ]
3.3 Forwards operation
3.4 Industrial and rough terrain truck families
3.5 Idling
4 Installation and equipment
4.1 Test environment
4.2 Equipment and condition of the truck
4.3 Position of the truck during measurement
4.3.1 LIFT and IDLE conditions
4.3.2 DRIVE condition
5 Operating conditions during measurement
5.1 General
5.2 Load of the truck
5.3 Operation of the truck during measurement
5.3.1 General
5.3.2 LIFT condition
5.3.3 IDLE condition
5.3.4 DRIVE condition
5.4 Trucks equipped with a cab
5.4.1 Cab with an air conditioning and/or pressurized
ventilating system(s)
5.4.2 Cab without air conditioning or pressurized ventilating
system(s)
6 Noise determination
6.1 Instrumentation
6.2 Microphone positions
6.2.1 Microphone positions for determination of the sound
pressure levels at the operator's position
6.2.2 Microphone positions for determination of the sound
power levels
6.3 Measurements
6.3.1 Measurements of sound pressure levels at operator's
position
6.3.2 Sound power level determination
7 Measurement uncertainties
8 Information to be recorded
9 Declaration of noise emission values
Annex A (Normative) Calculation of levels in an average operational
cycle
A.1 Calculation of the emission sound pressure level in an
operational cycle
A.2 Calculation of the sound power level for an operational
cycle
A.3 Time proportion factors of the operating conditions
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC
Annex ZB (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Gives methods for determining the sound pressure level at the operator's position and the sound power level of industrial and rough terrain trucks.
| Committee |
MHE/7
|
| DevelopmentNote |
Supersedes 95/710826 DC (01/2003) 2001 Edition Re-Issued in November 2008 & incorporates AMD 1 2008. (11/2008) Reviewed and Confirmed by BSI, October 2017. (09/2017)
|
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN 12053:2002 | Identical |
| SN EN 12053 : 2001 + A1 2008 | Identical |
| DIN EN 12053:2009-07 | Identical |
| NF EN 12053 : 2001 + A1 2008 | Identical |
| EN 12053:2001+A1:2008 | Identical |
| NS EN 12053 : 2001 + A1 2008 | Identical |
| I.S. EN 12053:2001 | Identical |
| NEN EN 12053 : 2001 + A1 2008 | Identical |
| NBN EN 12053 : 2001 + A1 2008 | Identical |
| UNI EN 12053 : 2008 | Identical |
| EN 1551:2000 | Safety of industrial trucks - Self propelled trucks over 10 000 kg capacity |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| EN 1726-2:2000 | Safety of Industrial Trucks - Self-propelled trucks up to and including 10000 kg capacity and tractors with a drawbar pull up to and including 20000 N - Part 2: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads |
| EN 1525:1997 | Safety of industrial trucks - Driverless trucks and their systems |
| EN 1757-1 : 2001 | SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 1: STACKER TRUCKS |
| EN 1757-2 : 2001 | SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 2: PALLET TRUCKS |
| EN 1459:1998+A3:2012 | Safety of industrial trucks - Self-propelled variable reach trucks |
| EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| ISO 5053:1987 | Powered industrial trucks Terminology |
| EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.