BS EN 12385-6:2004
Current
The latest, up-to-date edition.
Steel wire ropes. Safety Stranded ropes for mine shafts
Hardcopy , PDF
English
26-02-2004
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of hazards
5 Safety requirements and/or measures
5.1 General
5.2 Materials
5.2.1 Wire
5.2.2 Core
5.2.3 Lubricants and impregnating compounds
5.3 Rope manufacture
5.3.1 Wire joints
5.3.2 Wire finish
5.3.3 Lubrication
5.3.4 Construction
5.3.5 Rope grade
5.3.6 Stitching of flat ropes
5.3.7 Ropes for multi-rope friction hoists
5.4 Physical dimensions
5.4.1 Diameter
5.4.2 Tolerances
5.4.3 Permissible differences between diameter measurements
5.5 Breaking force
5.6 Rope length mass
5.7 Designation and classification
6 Verification of the safety requirements and/or measures
6.1 General
6.2 Lubricants
6.3 Lubrication
6.4 Construction
6.5 Test on rope for breaking force
6.5.1 Measured breaking force F[m] (method 1)
6.5.2 Measured aggregate breaking force, F[e.m] (method 2)
6.6 Measurement of rope length mass
7 Information for use
Annex A (normative) Factors for stranded round ropes
Annex B (normative) Calculation of breaking forces and nominal rope
length masses for the more common rope classes and
constructions of stranded round ropes
B.1 General
B.2 Minimum breaking force F[min]
B.3 Minimum aggregate breaking force F[e.min]
B.4 Measured aggregate breaking force F[e.m]
B.5 Calculated measured aggregate breaking force F[e.m.c]
B.6 Calculated measured breaking force F[m.c]
B.7 Nominal rope length mass M
Annex C (normative) Tables of breaking forces and nominal rope
length masses for the more common rope classes of flat
ropes
Annex D (informative) Factors for the calculation of the approximate
outer wire diameters for the more common rope constructions
of stranded round ropes
Annex E (informative) Information which should be provided with
an enquiry or order
E.1 Details of rope
E.2 Details of installation
E.2.1 Particulars of the shaft
E.2.2 Particulars of friction hoist driving sheave
Specifies the special material, manufacturing and testing requirements for stranded ropes (with round and/or shaped strands) and flat ropes for use as hoist ropes, stage ropes and balance ropes in mine shafts.
Committee |
MHE/1
|
DevelopmentNote |
Supersedes BS 302-6(1987) & 02/700319 DC (03/2004) Reviewed and confirmed by BSI, July 2014. (06/2014)
|
DocumentType |
Standard
|
Pages |
28
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
This European Standard specifies the additional materials, manufacturing and testing requirements to those given in Part 1 for stranded ropes (with round and/or shaped strands) and flat ropes for use as hoist ropes, stage ropes and balance ropes in mine-shafts. It shall be used in conjunction with Parts 1 and 2 of this standard. NOTE 1 For the purposes of this standard, stage ropes are considered to be hoist ropes. NOTE 2 This standard may also be used for ropes in other mining applications, e.g. surface mining. The additional hazards covered by this European Standard are identified in clause 4.
Standards | Relationship |
EN 12385-6:2004 | Identical |
NEN EN 12385-6 : 2004 | Identical |
NBN EN 12385-6 : 2004 | Identical |
UNE-EN 12385-6:2005 | Identical |
I.S. EN 12385-6:2004 | Identical |
NF EN 12385-6 : 2004 | Identical |
SN EN 12385-6 : 2004 | Identical |
NS EN 12385-6 : 1ED 2004 | Identical |
UNI EN 12385-6 : 2005 | Identical |
DIN EN 12385-6:2004-05 | Identical |
DIN 21258:2007-10 | LUBRICANTS AND IMPREGNATING COMPOUNDS FOR FRICTION HOIST ROPES IN MINING - SAFETY REQUIREMENTS AND TESTING |
EN 12385-2:2002+A1:2008 | Steel wire ropes - Safety - Part 2: Definitions, designation and classification |
EN 12385-1:2002+A1:2008 | Steel wire ropes - Safety - Part 1: General requirements |
ISO 3155:1976 | Stranded wire ropes for mine hoisting — Fibre components — Characteristics and tests |
EN 10264-2:2012 | Steel wire and wire products - Steel wire for ropes - Part 2: Cold drawn non alloy steel wire for ropes for general applications |
ISO 3156:1976 | Stranded wire ropes for mine hoisting — Impregnating compounds, lubricants and service dressings — Characteristics and tests |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
EN 10264-3:2012 | Steel wire and wire products - Steel wire for ropes - Part 3: Round and shaped non alloyed steel wire for high duty applications |
ISO 9001:2015 | Quality management systems — Requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.