BS EN 13297:2007
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Textile floor coverings. Classification of needled pile floor coverings
Hardcopy , PDF
28-07-2023
English
28-02-2009
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Description of categories and levels of use
5 Identification requirements
6 Basic requirements
7 Level of use classification
7.1 General
7.2 Classification for wear
7.2.1 Abrasion resistance - Lisson test
7.2.2 Hairiness (pilling) - Lisson test
7.3 General structural integrity
7.4 Classification for change in appearance
8 Luxury rating requirements
9 Performance properties
10 Report
11 Symbols
Annex A (normative) - Additional requirements for tiles
Annex B (normative) - Suitability for under-floor heating
Annex C (normative) - Colour change due to soiling subsequent to
spilled water
Annex D (normative) - Summary test report
Annex E (normative) - Criteria for the assessment of stair
suitability
Bibliography
Defines and specifies needled pile floor coverings in sheet form including use classification according to wear and appearance retention.
| Committee |
PRI/60
|
| DevelopmentNote |
Supersedes 98/123408 DC. (05/2005) Supersedes 06/30155788 DC. (10/2007) Reviewed and confirmed by BSI, July 2012. (06/2012)
|
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF EN 13297 : 2008 | Identical |
| DIN EN 13297:2007-12 | Identical |
| SN EN 13297 : 2007 | Identical |
| I.S. EN 13297:2007 | Identical |
| UNE-EN 13297:2008 | Identical |
| NBN EN 13297 : 2007 COR 2008 | Identical |
| NS EN 13297 : 2007 AC 2008 | Identical |
| NEN EN 13297 : 2007 C1 2008 | Identical |
| UNI EN 13297 : 2008 | Identical |
| DIN EN 13297:2000-11 | Identical |
| BS 5325:2001 | Installation of textile floor coverings. Code of practice |
| ISO 105-E01:2013 | Textiles — Tests for colour fastness — Part E01: Colour fastness to water |
| EN 1269:2015 | Textile floor coverings - Assessment of impregnations in needled floor coverings by means of a soiling test |
| ISO 2551:1981 | Machine-made textile floor coverings Determination of dimensional changes due to the effects of varied water and heat conditions |
| ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
| ISO 1766:1999 | Textile floor coverings Determination of thickness of pile above the substrate |
| ISO 717-2:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation |
| EN 985:2001 | Textile floor coverings - Castor chair test |
| ISO 10361:2015 | Textile floor coverings — Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester |
| ISO 845:2006 | Cellular plastics and rubbers — Determination of apparent density |
| EN 994:2012 | Textile floor coverings - Determination of the side length, squareness and straightness of tiles |
| ISO 10965:2011 | Textile floor coverings Determination of electrical resistance |
| ISO 3018:1974 | Textile floor coverings — Rectangular textile floor coverings — Determination of dimensions |
| ISO 8543:1998 | Textile floor coverings Methods for determination of mass |
| ISO 6356:2012 | Textile and laminate floor coverings — Assessment of static electrical propensity — Walking test |
| EN ISO 105-A01:2010 | Textiles - Tests for colour fastness - Part A01: General principles of testing (ISO 105-A01:2010) |
| EN 984:2001 | Textile floor coverings - Determination of the mass per unit area of the use surface of needled floor coverings |
| EN ISO 717-2:2013 | Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:2013) |
| EN 995:1995 | Textile floor coverings - Assessment of the creep of the backings |
| CEN/TS 14159:2007 | Textile floor coverings - Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat |
| EN ISO 845:2009 | Cellular plastics and rubbers - Determination of apparent density (ISO 845:2006) |
| ISO 8302:1991 | Thermal insulation — Determination of steady-state thermal resistance and related properties — Guarded hot plate apparatus |
| ISO 11378-2:2001 | Textile floor coverings — Laboratory soiling tests — Part 2: Drum test |
| CEN/TS 14472-2:2003 | Resilient, textile and laminate floor coverings - Design, preparation and installation - Part 2: Textile floor coverings |
| EN 986:2005 | Textile floor coverings - Tiles - Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane |
| EN ISO 354:2003 | Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
| EN 15115:2006 | Textile floor coverings - Determination of sensitivity to spilled water |
| ISO 140-8:1997 | Acoustics Measurement of sound insulation in buildings and of building elements Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor |
| ISO 2424:2007 | Textile floor coverings — Vocabulary |
| ISO 105-X12:2016 | Textiles Tests for colour fastness Part X12: Colour fastness to rubbing |
| EN ISO 140-8 : 1997 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 8: LABORATORY MEASUREMENTS OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A HEAVYWEIGHT STANDARD FLOOR |
| CEN/TS 14472-1:2003 | Resilient, textile and laminate floor coverings - Design, preparation and installation - Part 1: General |
| ISO 105-A01:2010 | Textiles Tests for colour fastness Part A01: General principles of testing |
| EN ISO 105-E01:2013 | Textiles - Tests for colour fastness - Part E01: Colour fastness to water (ISO 105-E01:2013) |
| EN ISO 105-X12:2016 | Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing (ISO 105-X12:2016) |
| EN ISO 105-B02:2014 | Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:2014) |
| EN 1814:2005 | Textile floor coverings - Determination of resistance to damage at cut edges using the modified Vettermann drum test |
| CEN/TS 15398:2016 | Resilient, textile and laminate floor coverings - Floor covering standard symbols - Complementary element |
| EN 685:2007 | Resilient, textile and laminate floor coverings - Classification |
| ISO 105-B02:2014 | Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test |
| ISO 1765:1986 | Machine-made textile floor coverings — Determination of thickness |
| EN 1963:2007 | Textile floor coverings - Tests using the Lisson Tretrad Machine |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.