![header thumbnail](/images/publishers\bsi_cover.gif)
BS EN 13807:2017
Current
The latest, up-to-date edition.
![header thumbnail](/images/publishers\bsi_cover.gif)
Transportable gas cylinders. Battery vehicles and multiple-element gas containers (MEGCs). Design, manufacture, identification and testing
Hardcopy , PDF
English
28-02-2017
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Design
5 Manufacturing
6 Identification
7 Type approval, inspection and testing
8 Documentation
Annex A (normative) - Specific requirements
for dissolved acetylene battery vehicles
Annex B (informative) - Marking of battery
vehicles and MEGCs
Bibliography
Defines the requirements for the design, manufacture, identification and testing of battery vehicles and multiple-element gas containers (MEGCs) containing cylinders, tubes or bundles of cylinders.
Committee |
PVE/3/7
|
DevelopmentNote |
Supersedes 00/704092 DC (12/2003) Supersedes 14/30287821 DC. (03/2017)
|
DocumentType |
Standard
|
Pages |
28
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
This European Standard specifies the requirements for the design, manufacture, identification and testing of battery vehicles and multiple-element gas containers (MEGCs) containing cylinders, tubes or bundles of cylinders. It is applicable to battery vehicles and MEGCs containing compressed gas, liquefied gas and mixtures thereof. It is also applicable to battery vehicles for dissolved acetylene. This European Standard is not applicable to battery vehicles and MEGC for toxic gases with an LC 50 value less than or equal to 200ml/m 3.
This European Standard applies also to battery vehicles and MEGCs containing bundles of cylinders connected by a manifold which are dis-assembled from the battery vehicle and filled individually.
This European Standard does not apply to battery vehicles and MEGCs containing pressure drums or tanks.
This European Standard does not specify requirements for the vehicle chassis or motive unit.
This European standard does not cover requirements for sea transportation.
This European Standard is primarily intended for industrial gases other than Liquefied Petroleum Gases (LPG). At the time of publication of this European Standard, there is no European Standard for dedicated LPG battery vehicles.
Standards | Relationship |
NS EN 13807 : 2017 | Identical |
NBN EN 13807 : 2003 COR 2005 | Identical |
NEN EN 13807 : 2017 | Identical |
SN EN 13807 : 2003 | Identical |
UNE-EN 13807:2017 | Identical |
EN 13807:2017 | Identical |
UNI EN 13807 : 2005 | Identical |
NF EN 13807 : 2017 | Identical |
DIN EN 13807:2016-02 (Draft) | Identical |
I.S. EN 13807:2017 | Identical |
DIN EN 13807:2017-05 | Identical |
ISO 7225:2005 | Gas cylinders — Precautionary labels |
ISO 10961:2010 | Gas cylinders Cylinder bundles Design, manufacture, testing and inspection |
ISO 9539:2010 | Gas welding equipment Materials for equipment used in gas welding, cutting and allied processes |
EN ISO 10961:2012 | Gas cylinders - Cylinder bundles - Design, manufacture, testing and inspection (ISO 10961:2010) |
ISO 11114-1:2012 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials |
EN ISO 9539:2010/A1:2013 | GAS WELDING EQUIPMENT - MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES (ISO 9539:2010/AMD 1:2013) |
ISO 14113:2013 | Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
EN ISO 11114-3:2010 | Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere (ISO 11114-3:2010) |
EN ISO 13088:2012 | Gas cylinders - Acetylene cylinder bundles - Filling conditions and filling inspection (ISO 13088:2011) |
EN ISO 13769:2009 | Gas cylinders - Stamp marking (ISO 13769:2007) |
ISO 11114-3:2010 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere |
EN ISO 11114-1:2012/A1:2017 | GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 1: METALLIC MATERIALS (ISO 11114-1: 2012/AMD 1:2017) |
EN ISO 7225:2007/A1:2012 | GAS CYLINDERS - PRECAUTIONARY LABELS (ISO 7225:2005/AMD 1:2012) |
ISO 10297:2014 | Gas cylinders — Cylinder valves — Specification and type testing |
EN ISO 13585:2012 | Brazing - Qualification test of brazers and brazing operators (ISO 13585:2012) |
ISO 11114-2:2013 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 2: Non-metallic materials |
ISO 13585:2012 | Brazing Qualification test of brazers and brazing operators |
ISO 1496-3:1995 | Series 1 freight containers Specification and testing Part 3: Tank containers for liquids, gases and pressurized dry bulk |
ISO 3807:2013 | Gas cylinders — Acetylene cylinders — Basic requirements and type testing |
EN ISO 11114-2:2013 | Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2013) |
EN 1089-3:2011 | Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 3: Colour coding |
ISO 10286:2007 | Gas cylinders Terminology |
ISO 11114-4:2017 | Transportable gas cylinders Compatibility of cylinder and valve materials with gas contents Part 4: Test methods for selecting steels resistant to hydrogen embrittlement |
EN ISO 11114-4:2017 | Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement (ISO 11114-4:2017) |
EN 13134:2000 | Brazing - Procedure approval |
EN ISO 10297:2014/A1:2017 | GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING (ISO 10297:2014/AMD 1:2017) |
EN ISO 10286:2015 | Gas cylinders - Terminology (ISO 10286:2015) |
EN ISO 14113:2013 | Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013) |
ISO 15615:2013 | Gas welding equipment — Acetylene manifold systems for welding, cutting and allied processes — Safety requirements in high-pressure devices |
ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
EN ISO 9606-1:2017 | Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) |
EN ISO 15615:2013 | Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices (ISO 15615:2013) |
ISO 9090:1989 | Gas tightness of equipment for gas welding and allied processes |
ISO 13769:2007 | Gas cylinders Stamp marking |
EN ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003) |
ISO 13088:2011 | Gas cylinders — Acetylene cylinder bundles — Filling conditions and filling inspection |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.