BS EN 13877-1:2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Concrete pavements Materials
Hardcopy , PDF
08-11-2023
English
30-04-2013
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
B/510/3
|
| DevelopmentNote |
Supersedes 00/107877 DC (09/2004)
|
| DocumentType |
Standard
|
| Pages |
16
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This European Standard specifies requirements for:
the constituents (concrete and other materials) of concrete pavements;
the properties of fresh and hardened concrete.
This European Standard is applicable to concrete pavements cast in situ. Concrete compacted by rollers is not covered by this European Standard.
This European Standard covers concrete pavements for roads, motorways and airports, pedestrian footpaths, cycle tracks, storage areas, and in general all traffic-bearing structures.
| Standards | Relationship |
| NBN EN 13877-1 : 2013 | Identical |
| NS EN 13877-1 : 2013 | Identical |
| NF EN 13877-1 : 2013 | Identical |
| NEN EN 13877-1 : 2013 | Identical |
| SN EN 13877-1 : 2016 | Identical |
| UNI EN 13877-1 : 2013 | Identical |
| DIN EN 13877-1:2013-06 | Identical |
| I.S. EN 13877-1:2013 | Identical |
| EN 13877-1:2013 | Identical |
| UNE-EN 13877-1:2013 | Identical |
| ONORM EN 13877-1 : 2013 | Identical |
| BS 7533-12:2006 | Pavements constructed with clay, natural stone or concrete pavers Guide to the structural design of trafficked pavements constructed on a bound base using concrete paving flags and natural stone slabs |
| 14/30291596 DC : 0 | BS 8500-1 - CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206 - PART 1: METHOD OF SPECIFYING AND GUIDANCE FOR THE SPECIFIER |
| BS 8500-1(2015) : 2015 | CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206 - PART 1: METHOD OF SPECIFYING AND GUIDANCE FOR THE SPECIFIER |
| BS 7533-10:2010 | Pavements constructed with clay, natural stone or concrete pavers Guide for the structural design of trafficked pavements constructed of natural stone setts and bound construction with concrete paving blocks |
| 13/30284071 DC : 0 | BS 7533-102 - PAVEMENTS CONSTRUCTED WITH CLAY, NATURAL STONE OR CONCRETE PAVING UNITS - PART 102: CODE OF PRACTICE FOR THE CONSTRUCTION AND MAINTENANCE OF PAVEMENTS USING MODULAR PAVING UNITS |
| EN 197-1:2011 | Cement - Part 1: Composition, specifications and conformity criteria for common cements |
| EN 12350-2:2009 | Testing fresh concrete - Part 2: Slump-test |
| EN 12350-6:2009 | Testing fresh concrete - Part 6: Density |
| EN 12390-7:2009 | Testing hardened concrete - Part 7: Density of hardened concrete |
| EN 12390-5:2009 | Testing hardened concrete - Part 5: Flexural strength of test specimens |
| EN 12350-3:2009 | Testing fresh concrete - Part 3: Vebe test |
| EN 10080:2005 | Steel for the reinforcement of concrete - Weldable reinforcing steel - General |
| EN 1008:2002 | Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
| EN 14188-3:2006 | Joint fillers and sealants - Part 3: Specifications for preformed joint seals |
| CEN/TS 14754-1:2007 | Curing compounds - Test methods - Part 1: Determination of water retention efficiency of common curing compounds |
| EN 12350-5:2009 | Testing fresh concrete - Part 5: Flow table test |
| EN 12620:2002+A1:2008 | Aggregates for concrete |
| EN 13877-2:2013 | Concrete pavements - Part 2: Functional requirements for concrete pavements |
| EN 12390-1:2012 | Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds |
| EN 13877-3:2004 | Concrete pavements - Part 3: Specifications for dowels to be used in concrete pavements |
| EN 12350-4:2009 | Testing fresh concrete - Part 4: Degree of compactability |
| EN 12390-2:2009 | Testing hardened concrete - Part 2: Making and curing specimens for strength tests |
| EN 14188-1:2004 | Joint fillers and sealants - Part 1: Specifications for hot applied sealants |
| CEN/TS 12390-9:2016 | Testing hardened concrete - Part 9: Freeze-thaw resistance with de-icing salts - Scaling |
| EN 12350-1:2009 | Testing fresh concrete - Part 1: Sampling |
| EN 14188-2:2004 | Joint fillers and sealants - Part 2: Specifications for cold applied sealants |
| EN 12390-6:2009 | Testing hardened concrete - Part 6: Tensile splitting strength of test specimens |
| EN 12350-7:2009 | Testing fresh concrete - Part 7: Air content - Pressure methods |
| EN 934-2:2009+A1:2012 | Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.