BS EN 14216:2015
Current
The latest, up-to-date edition.
Cement. Composition, specifications and conformity criteria for very low heat special cements
Hardcopy , PDF
English
31-07-2015
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Very low heat special cement
5 Constituents
6 Composition and notation
7 Mechanical, physical, heat of hydration, chemical
and durability requirements
8 Standard designation
9 Conformity criteria
Annex ZA (informative) - Clauses of this European Standard
addressing the provisions of EU Construction Products
Regulation
Bibliography
Specifies and gives the specifications of six distinct very low heat special cement products and their constituents.
Committee |
B/516/6
|
DevelopmentNote |
Supersedes 01/104968 DC (06/2004)
|
DocumentType |
Standard
|
Pages |
28
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
This European Standard defines and gives the specifications of six distinct very low heat special cement products and their constituents. The definition of each cement includes the proportions in which the constituents are to be combined to produce these distinct products in a single strength class having a limited heat of hydration value. The definition also includes requirements the constituents have to meet and the mechanical, physical, chemical and heat of hydration requirements for these products. This European Standard also states the conformity criteria and the related rules. Necessary durability requirements are also given. In addition to the specified requirements, an exchange of additional information between the cement producer and user can be helpful. The procedures for such an exchange are not within the scope of this European Standard but should be dealt with in accordance with national standards or regulations or can be agreed between the parties concerned. NOTE1 The word \'cement\' in this European Standard is used to refer to very low heat special cement unless otherwise indicated. NOTE2 The risk of early-age thermal cracking in concrete depends upon the properties and execution and is, therefore, also dependent on factors other than the heat of hydration of the cement.
Standards | Relationship |
NF EN 14216 : 2016 | Identical |
NS EN 14216 : 2004 | Identical |
UNI EN 14216 : 2005 | Identical |
SN EN 14216 : 2015 | Identical |
DIN EN 14216:2015-09 | Identical |
NEN EN 14216 : 2015 | Identical |
NBN EN 14216 : 2015 | Identical |
UNE-EN 14216:2015 | Identical |
EN 14216:2015 | Identical |
I.S. EN 14216:2015 | Identical |
BS 5911-5(2004) : 2004 | CONCRETE PIPES AND ANCILLARY CONCRETE PRODUCTS - PART 5: SPECIFICATION FOR PRESTRESSED NON-PRESSURE PIPES AND FITTINGS WITH FLEXIBLE JOINTS |
BS 6349-1-4:2013 | Maritime works General. Code of practice for materials |
09/30209209 DC : 0 | BS 5911-3 - CONCRETE PIPES AND ANCILLARY CONCRETE PRODUCTS - PART 3: SPECIFICATION FOR UNREINFORCED AND REINFORCED CONCRETE MANHOLES AND SOAKAWAYS (COMPLEMENTARY TO BS EN 1917:2002) |
09/30209269 DC : 0 | BS 5911-6:2004+A1 - CONCRETE PIPES AND ANCILLARY CONCRETE PRODUCTS - PART 6: SPECIFICATION FOR ROAD GULLIES AND GULLY COVER SLABS |
BS 5911-4(2002) : 2002 | CONCRETE PIPES AND ANCILLARY CONCRETE PRODUCTS - PART 4: SPECIFICATION FOR UNREINFORCED AND REINFORCED CONCRETE INSPECTION CHAMBERS |
09/30209267 DC : 0 | BS 5911-5:2004+A1 - CONCRETE PIPES AND ANCILLARY CONCRETE PRODUCTS - PART 5: SPECIFICATION FOR PRESTRESSED NON-PRESSURE PIPES AND FITTINGS WITH FLEXIBLE JOINTS |
09/30209265 DC : 0 | BS 5911-4:2002+A2 - CONCRETE PIPES AND ANCILLARY CONCRETE PRODUCTS - PART 4: SPECIFICATION FOR UNREINFORCED AND REINFORCED CONCRETE INSPECTION CHAMBERS (COMPLEMENTARY TO BS EN 1917:2002) |
BS 5911-6(2004) : 2004 | CONCRETE PIPES AND ANCILLARY CONCRETE PRODUCTS - PART 6: SPECIFICATION FOR ROAD GULLIES AND GULLY COVER SLABS |
BS PAS 8820(2016) : 2016 | CONSTRUCTION MATERIALS - ALKALI-ACTIVATED CEMENTITIOUS MATERIAL AND CONCRETE - SPECIFICATION |
14/30291598 DC : 0 | BS 8500-2 - CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206 - PART 2: SPECIFICATION FOR CONSTITUENT MATERIALS AND CONCRETE |
09/30209261 DC : 0 | BS 5911-1:2002+A2 - CONCRETE PIPES AND ANCILLARY CONCRETE PRODUCTS - PART 1: SPECIFICATION FOR UNREINFORCED AND REINFORCED CONCRETE PIPES (INCLUDING JACKING PIPES) AND FITTINGS WITH FLEXIBLE JOINTS (COMPLEMENTARY TO BS EN 1916:2002) |
BS 8500-2(2015) : 2015 | CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206 - PART 2: SPECIFICATION FOR CONSTITUENT MATERIALS AND CONCRETE |
BS 5911-3(2010) : 2010 | CONCRETE PIPES AND ANCILLARY CONCRETE PRODUCTS - PART 3: SPECIFICATION FOR UNREINFORCED AND REINFORCED CONCRETE MANHOLES AND SOAKAWAYS (COMPLEMENTARY TO BS EN 1917:2002) |
BS 8500-2(2006) : 2006 | CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206-1 - PART 2: SPECIFICATION FOR CONSTITUENT MATERIALS AND CONCRETE |
EN 196-7:2007 | Methods of testing cement - Part 7: Methods of taking and preparing samples of cement |
EN 196-2:2013 | Method of testing cement - Part 2: Chemical analysis of cement |
EN 197-1:2011 | Cement - Part 1: Composition, specifications and conformity criteria for common cements |
EN 196-5:2011 | Methods of testing cement - Part 5: Pozzolanicity test for pozzolanic cement |
EN 197-2:2014 | Cement - Part 2: Conformity evaluation |
EN 196-1:2016 | Methods of testing cement - Part 1: Determination of strength |
EN 196-8:2010 | Methods of testing cement - Part 8: Heat of hydration - Solution method |
EN 196-3:2016 | Methods of testing cement - Part 3: Determination of setting times and soundness |
EN 196-9:2010 | Methods of testing cement - Part 9: Heat of hydration - Semi-adiabatic method |
EN 206:2013+A1:2016 | Concrete - Specification, performance, production and conformity |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.