• BS EN 14220:2006

    Current The latest, up-to-date edition.

    Timber and wood-based materials in external windows, external door leaves and external doorframes. Requirements and specifications

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  30-11-2006

    Publisher:  British Standards Institution

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 General requirements
    5 Appearance
      5.1 Characteristics
      5.2 Appearance classes
          5.2.1 General
          5.2.2 Finger jointing, end jointing, edge jointing and
                laminating
      5.3 Adhesives and repair compounds
      5.4 Slope of grain
      5.5 Repair
          5.5.1 Features
          5.5.2 Plugs
          5.5.3 Filler
      5.6 Wood-based products
    6 Biological durability
    7 Moisture content
    8 Surface finish
    9 Density
    Annex A (informative) Quality recommendations for elements in
            external windows, external door leaves and external
            doorframes
    Annex B (informative) Classification of the face of a window/door
    Bibliography

    Abstract - (Show below) - (Hide below)

    Specifies principle material requirements for timber and wood-based products in external windows, external door leaves and external doorframes (with or without fixed parts), including those relating to appearance, biological durability and other physical characteristics.

    General Product Information - (Show below) - (Hide below)

    Committee B/543
    Development Note Supersedes 01/104734 DC and 04/30107690 DC. (12/2006)
    Document Type Standard
    Publisher British Standards Institution
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    08/30143158 DC : DRAFT AUG 2008 BS 644 - TIMBER WINDOWS - FULLY FINISHED FACTORY ASSEMBLED WINDOWS OF VARIOUS TYPES - SPECIFICATION
    BS 8529:2010 Composite doorsets. Domestic external doorsets. Specification
    BS 8529:2017 Composite doorsets. Domestic external doorsets, Specification
    16/30339191 DC : 0 BS 8529 - COMPOSITE DOORSETS - DOMESTIC EXTERNAL DOORSETS - SPECIFICATION
    BS 644:2012 Timber windows and doorsets. Fully finished factory-assembled windows and doorsets of various types. Specification
    BS 644:2009 Timber windows. Fully finished factory-assembled windows of various types. Specification
    BS 8605-1:2014 External timber cladding Method of specifying
    12/30218393 DC : 0 BS 644 - TIMBER WINDOWS AND DOORSETS - FULLY FINISHED FACTORY-ASSEMBLED WINDOWS AND DOORSETS OF VARIOUS TYPES - SPECIFICATION
    12/30263952 DC : 0 BS EN 61048:2006+A1 - AUXILIARIES FOR LAMPS - CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - GENERAL AND SAFETY REQUIREMENTS

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 13183-3:2005 Moisture content of a piece of sawn timber - Part 3: Estimation by capacitance method
    EN 635-2:1995 Plywood - Classification by surface appearance - Part 2: Hardwood
    EN 13183-1:2002/AC:2003 MOISTURE CONTENT OF A PIECE OF SAWN TIMBER - DETERMINATION BY OVEN DRY METHOD
    EN 335-2:2006 Durability of wood and wood-based products - Definition of use classes - Part 2: Application to solid wood
    EN 12765:2016 Classification of thermosetting wood adhesives for non-structural applications
    EN 13986:2004 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
    ENV 635-4 : 1996 PLYWOOD - CLASSIFICATION BY SURFACE APPEARANCE - PARAMETERS OF ABILITY FOR FINISHING, GUIDELINE
    EN 13307-1 : 2006 TIMBER BLANKS AND SEMI-FINISHED PROFILES FOR NON-STRUCTURAL USES - PART 1: REQUIREMENTS
    EN 351-1:2007 Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention
    EN 14298:2017 Sawn timber - Assessment of drying quality
    EN 204:2016 Classification of thermoplastic wood adhesives for non-structural applications
    EN 14951:2006 Solid hardwood panelling and cladding - Machined profiles elements
    EN 14519 : 2005 SOLID SOFTWOOD PANELLING AND CLADDING - MACHINED PROFILES WITH TONGUE AND GROOVE
    EN 635-1:1994 Plywood - Classification by surface appearance - Part 1: General
    EN 350-2:1994 Durability of wood and wood-based products - Natural durability of solid wood - Part 2: Guide to natural durability and treatability of selected wood species of importance in Europe
    EN 13183-2:2002/AC:2003 MOISTURE CONTENT OF A PIECE OF SAWN TIMBER - ESTIMATION BY ELECTRICAL RESISTANCE METHOD
    EN 844-3 : 1995 ROUND AND SAWN TIMBER - TERMINOLOGY - PART 3: GENERAL TERMS RELATING TO SAWN TIMBER
    EN 599-1:2009+A1:2013 Durability of wood and wood-based products - Efficacy of preventive wood preservatives as determined by biological tests - Part 1: Specification according to use class
    EN 335-3:1995 Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 3: Application to wood-based panels
    EN 14221:2006 Timber and wood-based materials in internal windows, internal door leaves and internal doorframes - Requirements and specifications
    EN 460:1994 Durability of wood and wood-based products - Natural durability of solid wood - Guide to the durability requirements for wood to be used in hazard classes
    EN 635-3:1995 Plywood - Classification by surface appearance - Part 3: Softwood
    EN 335-1:2006 Durability of wood and wood- based products - Definition of use classes - Part 1: General
    EN 635-5:1999 Plywood - Classification by surface appearance - Part 5: Methods for measuring and expressing characteristics and defects
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective