BS EN 14227-13:2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Hydraulically bound mixtures. Specifications Soil treated by hydraulic road binder
Hardcopy , PDF
31-01-2016
English
30-06-2006
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Constituents
5.1 Hydraulic road binder
5.2 Soil
5.3 Water
5.4 Other constituents
6 Mixture
6.1 General
6.2 Proportioning and dry density
7 Requirements for the fresh mixture
7.1 Water content
7.2 Degree of pulverization
7.3 Immediate bearing index
7.4 Moisture condition value
8 Laboratory mechanical performance classification
8.1 General
8.2 Classification by California bearing ratio
8.3 Classification by compressive strength
8.4 Classification by R[t], E
8.4.1 General
8.4.2 Method by direct tensile testing
8.4.3 Method by indirect tensile testing
8.4.4 Method by indirect tensile and compression
testing
9 Resistance to water and other requirements for the
mixture
9.1 Resistance to water
9.1.1 General
9.1.2 Strength after immersion in water
9.1.3 Linear swelling after soaking in water
9.1.4 Volumetric swelling after immersion in water
9.2 Strength at trafficking
9.3 Resistance to frost
9.4 Workability period
10 Production control
11 Designation and description
12 Labelling
Annex A (informative) Examples of 'age of classification' and
curing regimes for R[c], R[t] and E
testing of treated soils including
resistance to water testing by full
immersion in water
Annex B (informative) Production control for hydraulically
treated mixtures
B.1 General
B.2 Quality Manual
B.3 Organization
B.3.1 Responsibility and authority
B.3.2 Management representative
B.3.3 Internal audits
B.3.4 Management review
B.3.5 Sub-contract services
B.3.6 Records
B.3.7 Training
B.4 Control procedures
B.4.1 Production management
B.4.2 Composition of the mixture
B.4.3 Constituents
B.4.4 Process control
B.4.5 Inspection, calibration and control of process
equipment
B.4.6 Handling and delivery
B.5 Inspection and testing of constituents and mixtures
during production
B.5.1 General
B.5.2 Characteristics that require control during
production
B.5.3 Frequency of sampling the mixture
B.6 Inspection and testing equipment
B.6.1 General
B.6.2 Measuring and testing equipment
B.6.3 Measuring and testing equipment in the process
B.6.4 Measuring and testing equipment in laboratory
B.7 Non-conformity
B.7.1 General
B.7.2 Non-conformity of constituents
B.7.3 Non-conformity of the mixture
Specifies soils treated by hydraulic road binder for roads, airfields and other trafficked areas and specifies the requirements for their constituents, composition and laboratory performance classification.
Committee |
B/510
|
DevelopmentNote |
Supersedes 03/118078 DC (06/2006)
|
DocumentType |
Standard
|
Pages |
26
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
EN 14227-13:2006 | Identical |
NS EN 14227-13 : 1ED 2006 | Identical |
UNI EN 14227-13 : 2006 | Identical |
I.S. EN 14227-13:2006 | Identical |
DIN EN 14227-13:2006-08 | Identical |
UNE-EN 14227-13:2007 | Identical |
NF EN 14227-13 : 2006 | Identical |
NEN EN 14227-13 : 2006 | Identical |
NBN EN 14227-13 : 2006 | Identical |
15/30301520 DC : 0 | BS 8004 - CODE OF PRACTICE FOR FOUNDATIONS (FORMERLY CP 2004) |
EN 13286-42:2003 | Unbound and hydraulically bound mixtures - Part 42: Test method for the determination of the indirect tensile strength of hydraulically bound mixtures |
EN 13286-51:2004 | Unbound and hydraulically bound mixtures - Part 51: Method for the manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compaction |
EN 14227-11:2006 | Hydraulically bound mixtures - Specifications - Part 11: Soil treated by lime |
EN 13286-40:2003 | Unbound and hydraulically bound mixtures - Part 40: Test method for the determination of the direct tensile strength of hydraulically bound mixtures |
EN 13286-49:2004 | Unbound and hydraulically bound mixtures - Part 49: Accelerated swelling test for soil treated by lime and/or hydraulic binder |
EN 13286-43:2003 | Unbound and hydraulically bound mixtures - Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures |
ENV 13282:2000 | Hydraulic road binders - Composition, specifications and conformity criteria |
EN 13286-45:2003 | Unbound and hydraulically bound mixtures - Part 45: Test method for the determination of the workability period of hydraulically bound mixtures |
EN 13286-47:2012 | Unbound and hydraulically bound mixtures - Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling |
EN 933-1:2012 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
EN 13286-46:2003 | Unbound and hydraulically bound mixtures - Part 46: Test method for the determination of the moisture condition value |
EN 13286-52:2004 | Unbound and hydraulically bound mixtures - Part 52: Method for the manufacture of test specimens of hydraulically bound mixtures using vibrocompression |
EN 13286-41:2003 | Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures |
EN 13286-50:2004 | Unbound and hydraulically bound mixtures - Part 50: Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction |
EN 13286-5:2003 | Unbound and hydraulically bound mixtures - Part 5: Test methods for laboratory reference density and water content - Vibrating table |
EN 13286-4:2003 | Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content - Vibrating hammer |
EN 13286-53:2004 | Unbound and hydraulically bound mixtures - Part 53: Methods for the manufacture of test specimens of hydraulically bound mixtures using axial compression |
EN 13286-3:2003 | Unbound and hydraulically bound mixtures - Part 3: Test methods for laboratory reference density and water content - Vibrocompression with controlled parameters |
EN 14227-5:2013 | Hydraulically bound mixtures - Specifications - Part 5: Hydraulic road binder bound granular mixtures |
EN 13286-48:2005 | Unbound and hydraulically bound mixtures - Part 48: Test method for the determination of degree of pulverisation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.