BS EN 14483-2:2004
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Vitreous and porcelain enamels. Determination of resistance to chemical corrosion Determination of resistance to chemical corrosion by boiling acids, neutral liquids and/or their vapours
Hardcopy , PDF
30-06-2011
English
07-12-2004
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Principle
4 Reagents
5 Apparatus and materials
5.1 Test apparatus
5.1.1 General description
5.2 Drying oven, capable of maintaining temperatures
of at least 130 degrees C
5.3 Desiccator, for example with an internal diameter
of 200 mm
5.4 Graduated measuring cylinder, capacity
500 ml, conforming to the requirements of ISO 4788
5.5 Beakers
5.6 Balance, capable of weighing to the nearest to
0,2 10[-3] g
5.7 Sponge, soft
5.8 Graduated hydrometer, conforming to the requirements
of ISO 649-1
6 Packing rings
6.1 General
6.2 Packing A
6.3 Packing B
7 Test specimens
8 Procedure
9 Expression of results
9.1 Total loss in mass per unit area
9.2 Corrosion rate
10 Boiling citric acid
10.1 General
10.2 Citric acid test solution
10.3 Duration of the test
10.4 Test report
11 Boiling sulfuric acid
11.1 General
11.2 Test solution
11.3 Duration of the test
11.4 Test report
12 Boiling hydrochloric acid
12.1 General
12.2 Test solution
12.3 Duration of the test
12.4 Test report
13 Boiling distilled or demineralized water
13.1 General
13.2 Test solution
13.3 Duration of the test
13.4 Test report
14 Other test solutions and/or conditions
14.1 General
14.2 Test solution
14.3 Duration of the test
14.4 Test report
Bibliography
Describes a test method for the determination of the resistance of flat surfaces of vitreous and porcelain enamels to boiling acids, neutral liquids, and/or their vapours.
| Committee |
STI/36
|
| DevelopmentNote |
Supersedes BS 1344-8(1984), BS 1344-9(1998), BS 1344-10(1987) and BS 1344-14(1984). (12/2004)
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| SN EN 14483-2 : 2004 | Identical |
| EN 14483-2:2004 | Identical |
| UNI EN 14483-2 : 2004 | Identical |
| NEN EN 14483-2 : 2004 | Identical |
| NBN EN 14483-2 : 2004 | Identical |
| NS EN 14483-2 : 1ED 2004 | Identical |
| I.S. EN 14483-2:2004 | Identical |
| DIN EN 14483-2:2004-09 | Identical |
| NF EN 14483-2 : 2004 | Identical |
| ISO 2723:1995 | Vitreous and porcelain enamels for sheet steel Production of specimens for testing |
| ISO 3585:1998 | Borosilicate glass 3.3 — Properties |
| ISO 4788:2005 | Laboratory glassware — Graduated measuring cylinders |
| ISO 718:1990 | Laboratory glassware — Thermal shock and thermal shock endurance — Test methods |
| ISO 2724:1973 | Vitreous and porcelain enamels for cast iron Production of specimens for testing |
| ISO 4799:1978 | Laboratory glassware — Condensers |
| EN ISO 3696:1995 | Water for analytical laboratory use - Specification and test methods (ISO 3696:1987) |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| ISO 13804:1999 | Vitreous and porcelain enamels for aluminium Production of specimens for testing |
| ISO 649-1:1981 | Laboratory glassware — Density hydrometers for general purposes — Part 1: Specification |
| ISO 1629:2013 | Rubber and latices — Nomenclature |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.