BS EN 14483-4:2004
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Vitreous and porcelain enamels. Determination of resistance to chemical corrosion Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel
Hardcopy , PDF
30-06-2011
English
10-12-2004
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Principle
4 Reagents
5 Apparatus and material
5.1 Test apparatus: cylindrical vessel
5.1.1 General
5.2 Thermostatically controlled liquid bath (containing
demineralized or distilled water), incorporating a
stirrer or other rotating device for use with one
or more pieces of test apparatus. It shall be capable
of being sealed against loss on evaporation and
allowing temperatures up to 100 degrees C to be kept
constant to 0,1 degrees C
5.3 Thermometer, calibrated and graduated in 0,1 degrees C
steps, for use with the thermostatically controlled
liquid bath
5.4 Drying oven, capable of maintaining temperatures of at
least 130 degrees C
5.5 Desiccator, internal diameter of at least 200 mm
5.6 Polypropylene bottle, of 1000 ml capacity and capable of
being closed
5.7 One-mark volumetric flask, 1000 ml capacity and conforming
to the requirements of class A of ISO 1042
5.8 Funnel, of maximum diameter of 70 mm
5.9 Balance, accurate to 0,2 x 10[-3] g
5.10 Cotton wool
6 Test specimens
7 Procedure
8 Expression of results
8.1 Total loss in mass per unit area
8.2 Corrosion rate
9 Hot sodium hydroxide test
9.1 General
9.2 Test solution, c (NaOH) = 0,1 mol/l
9.3 Test temperature
9.4 Duration of the test
9.5 Test report
10 Other test solution
10.1 General
10.2 Test solution
10.3 Test temperature
10.4 Duration of the test
10.5 Test report
Bibliography
Describes a test method for the determination of vitreous and porcelain enamelled articles to resistance to attack by alkaline liquids at temperatures between 25 degrees C and 95 degrees C.
| Committee |
STI/36
|
| DevelopmentNote |
Supersedes BS 1344-6(1971), BS 1344-15(1997) and BS 1344-17(1998). (12/2004)
|
| DocumentType |
Standard
|
| Pages |
20
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| SN EN 14483-4 : 2004 | Identical |
| I.S. EN 14483-4:2004 | Identical |
| EN 14483-4:2004 | Identical |
| DIN EN 14483-4:2004-09 | Identical |
| UNI EN 14483-4 : 2004 | Identical |
| NF EN 14483-4 : 2004 | Identical |
| UNE-EN 14483-4:2005 | Identical |
| NBN EN 14483-4 : 2004 | Identical |
| NS EN 14483-4 : 1ED 2004 | Identical |
| NEN EN 14483-4 : 2004 | Identical |
| ISO 2723:1995 | Vitreous and porcelain enamels for sheet steel Production of specimens for testing |
| ISO 1042:1998 | Laboratory glassware — One-mark volumetric flasks |
| ISO 2724:1973 | Vitreous and porcelain enamels for cast iron Production of specimens for testing |
| EN ISO 3696:1995 | Water for analytical laboratory use - Specification and test methods (ISO 3696:1987) |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| ISO 13804:1999 | Vitreous and porcelain enamels for aluminium Production of specimens for testing |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.