• There are no items in your cart

BS EN 1459-1:2017

Withdrawn

Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Rough-terrain trucks. Safety requirements and verification Variable-reach trucks

Available format(s)

Hardcopy , PDF

Withdrawn date

30-03-2020

Language(s)

English

Published date

06-12-2017

Defines the safety requirements of self-propelled variable-reach rough-terrain trucks (hereafter referred to as trucks), intended to handle loads, equipped with a telescopic lifting means (pivoted boom), on which a load handling device (e.g. carriage and fork arms) is fitted.

This European Standard specifies the safety requirements of self-propelled variable-reach rough-terrain trucks (hereafter referred to as trucks), intended to handle loads, equipped with a telescopic lifting means (pivoted boom), on which a load handling device (e.g. carriage and fork arms) is fitted. For the purpose of this standard, rough-terrain variable-reach trucks are designed to transport, lift and place loads and can be driven on unimproved terrain. Fork arms are considered to be part of the truck. Trucks can also be equipped with a variety of attachments (e.g. bale spikes, mowers, sweepers). This European Standard deals with all the significant hazards, hazardous situations and events relevant to the trucks when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A). This European Standard does not apply to: - slewing variable reach rough terrain trucks covered by EN 1459-2; - industrial variable reach trucks covered by EN ISO 3691-2; - lorry-mounted variable reach trucks; - variable reach trucks fitted with tilting or elevating operator position; - mobile cranes covered by EN 13000; - machines designed primarily for earth moving, even if their buckets and blades are replaced with forks (see EN 474 series); - trucks designed primarily with variable length load suspension elements (e.g. chain, ropes) from which the load may swing freely in all directions; - trucks fitted with personnel/work platforms, designed to move persons to elevated working positions; - trucks designed primarily for container handling; - trucks on tracks; - trucks with articulated chassis; - attachments (covered by prEN 1459-5). This European Standard does not address hazards linked to: - hybrid power systems; - gas power system; - gasoline engine system; - battery power system; - tractor specific devices (e.g. PTO). This European Standard does not address hazards which may occur: a) when handling suspended loads which may swing freely (additional requirements are given in prEN 1459-4 (in preparation)); b) when using trucks on public roads; c) when operating in potentially explosive atmospheres; d) when operating underground; e) when towing trailers; f) when fitted with a personnel work platform (additional requirements are given in EN 1459-3); g) when using cruise-control. This European Standard does not provide a method of calculation for fatigue and strength of material. This document is not applicable to trucks manufactured before the date of its publication.

Committee
MHE/7
DevelopmentNote
Supersedes 14/30302140 DC & BS EN 1459. (12/2017)
DocumentType
Standard
ISBN
9780580868085
Pages
68
PublisherName
British Standards Institution
Status
Withdrawn

Standards Relationship
EN 1459-1:2017 Identical

ISO 3449:2005 Earth-moving machinery — Falling-object protective structures — Laboratory tests and performance requirements
EN ISO 2860:2008 Earth-moving machinery - Minimum access dimensions (ISO 2860:1992)
ISO 10532:1995 Earth-moving machinery Machine-mounted retrieval device Performance requirements
ISO 10263-5:2009 Earth-moving machinery Operator enclosure environment Part 5: Windscreen defrosting system test method
EN ISO 6683:2008 Earth-moving machinery - Seat belts and seat belt anchorages - Performance requirements and tests (ISO 6683:2005)
ISO 13333:1994 Earth-moving machinery Dumper body support and operator's cab tilt support devices
ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
ISO 15817:2012 Earth-moving machinery — Safety requirements for remote operator control systems
ISO 7096:2000 Earth-moving machinery Laboratory evaluation of operator seat vibration
ISO 3691-2:2016 Industrial trucks — Safety requirements and verification — Part 2: Self-propelled variable-reach trucks
ISO 3411:2007 Earth-moving machinery Physical dimensions of operators and minimum operator space envelope
ISO 6683:2005 Earth-moving machinery Seat belts and seat belt anchorages Performance requirements and tests
EN ISO 3449:2008 Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:2005)
EN ISO 3411:2007 Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007)
EN ISO 3457:2008 Earth-moving machinery - Guards - Definitions and requirements (ISO 3457:2003)
ISO 22915-20:2008 Industrial trucks — Verification of stability — Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization
ISO 13732-1:2006 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
ISO 5353:1995 Earth-moving machinery, and tractors and machinery for agriculture and forestry Seat index point
ISO 4413:2010 Hydraulic fluid power General rules and safety requirements for systems and their components
ISO 12508:1994 Earth-moving machinery Operator station and maintenance areas Bluntness of edges
EN ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
ISO 22915-10:2008 Industrial trucks — Verification of stability — Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices
EN ISO 3691-2:2016/AC:2016 INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SELF-PROPELLED VARIABLE-REACH TRUCKS (ISO 3691-2:2016)
ISO 5010:2007 Earth-moving machinery Rubber-tyred machines Steering requirements
ISO 16528-2:2007 Boilers and pressure vessels — Part 2: Procedures for fulfilling the requirements of ISO 16528-1
ISO 21507:2010 Earth-moving machinery Performance requirements for non-metallic fuel tanks
EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
ISO 12509:2004 Earth-moving machinery — Lighting, signalling and marking lights, and reflex-reflector devices
EN ISO 11688-2 : 2000 ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN
ISO 6011:2003 Earth-moving machinery — Visual display of machine operation
ISO 10896-1:2012 Rough-terrain trucks Safety requirements and verification Part 1: Variable-reach trucks
ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
ISO 22915-14:2010 Industrial trucks Verification of stability Part 14: Rough-terrain variable-reach trucks
EN 12895:2015 Industrial trucks - Electromagnetic compatibility
EN 1175-2:1998+A1:2010 Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks
ISO 3795:1989 Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials
EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
EN ISO 5353:1998 Earth-moving machinery, and tractors and machinery for agriculture and forestry - Seat index point (ISO 5353:1995)
ISO 10263-3:2009 Earth-moving machinery Operator enclosure environment Part 3: Pressurization test method
ISO 3471:2008 Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements
ISO 15818:2017 Earth-moving machinery Lifting and tying-down attachment points Performance requirements
ISO 2860:1992 Earth-moving machinery — Minimum access dimensions
EN 15830:2012 Rough-terrain variable reach trucks - Visibility - Test methods and verification
ISO 15870:2000 Powered industrial trucks — Safety signs and hazard pictorials — General principles
EN 1459-3:2015 Rough-terrain trucks - Safety requirements and verification - Part 3: Interface between the variable-reach truck and the work platform
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
ISO 16528-1:2007 Boilers and pressure vessels — Part 1: Performance requirements
EN 13309:2010 Construction machinery - Electromagnetic compatibility of machines with internal power supply
EN 62061:2005/A2:2015 SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS (IEC 62061:2005/A2:2015)
ISO 10263-2:2009 Earth-moving machinery Operator enclosure environment Part 2: Air filter element test method
ISO 3457:2003 Earth-moving machinery Guards Definitions and requirements
EN ISO 3471:2008 Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements (ISO 3471:2008)
ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
EN 13059:2002+A1:2008 Safety of industrial trucks - Test methods for measuring vibration
EN ISO 6682:2008 Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989)
ISO 6292:2008 Powered industrial trucks and tractors Brake performance and component strength
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
ISO 10972-3:2003 Cranes Requirements for mechanisms Part 3: Tower cranes
ISO 10263-4:2009 Earth-moving machinery Operator enclosure environment Part 4: Heating, ventilating and air conditioning (HVAC) test method and performance
EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
ISO 2330:2002 Fork-lift trucks — Fork arms — Technical characteristics and testing
CEN/TR 1459-6 : 2015 ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 6: APPLICATION OF EN ISO 13849-1 TO SLEWING AND NON-SLEWING VARIABLE-REACH ROUGH-TERRAIN TRUCK
IEC 61310-1:2007 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
EN ISO 2867:2011 Earth-moving machinery - Access systems (ISO 2867:2011)
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
EN ISO 4413:2010 Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)
EN ISO 11688-1:2009 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
EN 12053:2001+A1:2008 Safety of industrial trucks - Test methods for measuring noise emissions
ISO 6016:2008 Earth-moving machinery — Methods of measuring the masses of whole machines, their equipment and components
ISO 2867:2011 Earth-moving machinery Access systems
ISO 9533:2010 Earth-moving machinery Machine-mounted audible travel alarms and forward horns Test methods and performance criteria
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
ISO/TR 11688-2:1998 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design
EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
EN 15000:2008 Safety of industrial trucks - Self propelled variable reach trucks - Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters
EN ISO 7096:2008/AC:2009 EARTH-MOVING MACHINERY - LABORATORY EVALUATION OF OPERATOR SEAT VIBRATION
ISO 5053-1:2015 Industrial trucks Terminology and classification Part 1: Types of industrial trucks
EN 1459-2:2015 Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks
EN 894-1:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators

View more information
€284.10
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.