BS EN 14906:2012
Current
Current
The latest, up-to-date edition.
Leather. Leather for automotive. Test methods and testing parameters
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
31-05-2012
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General principles
5 Sampling
6 Conditioning and sampling preparation
7 List of test methods
8 Test reports
Bibliography
Provides guidelines to select the test methods to assess the performance of leather for automotive.
| Committee |
TCI/69
|
| DevelopmentNote |
Supersedes DD CEN/TS 14906. (05/2012) Supersedes 10/30233295 DC. (06/2012)
|
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes | |
| UnderRevision |
This European Standard gives guidelines to select the test methods to assess the performance of leather for automotive. This document also specifies the sampling and conditioning procedures of specimens. NOTE Regulations on chemical substances in consumer goods may differ from country to country requiring for any given market a special attention to restricted substances.
| Standards | Relationship |
| EN 14906:2012 | Identical |
| EN ISO 3377-1:2011 | Leather - Physical and mechanical tests - Determination of tear load - Part 1: Single edge tear (ISO 3377-1:2011) |
| VDA 230-205 : 2005 | AUTOMOTIVE LEATHER - DETERMINATION LOOSE GRAIN EFFECT |
| EN ISO 17186:2011 | Leather - Physical and mechanical tests - Determination of surface coating thickness (ISO 17186:2011) |
| ISO 2588:2014 | Leather Sampling Number of items for a gross sample |
| EN ISO 3376:2011 | Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension (ISO 3376:2011) |
| ISO 15701:2015 | Leather — Tests for colour fastness — Colour fastness to migration into polymeric material |
| ISO 105-B06:1998 | Textiles Tests for colour fastness Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test |
| ISO 11644:2009 | Leather — Test for adhesion of finish |
| ISO 26082-1:2012 | Leather Physical and mechanical test methods for the determination of soiling Part 1: Rubbing (Martindale) method |
| ISO 9237:1995 | Textiles — Determination of the permeability of fabrics to air |
| EN ISO 4044:2017 | Leather - Chemical tests - Preparation of chemical test samples (ISO 4044:2017) |
| EN ISO 9237:1995 | Textiles - Determination of permeability of fabrics to air (ISO 9237:1995) |
| EN ISO 15701:2015 | Leather - Tests for colour fastness - Colour fastness to migration into polymeric material (ISO 15701:2015) |
| VDA 278 : 2011 | THERMAL DESORPTION ANALYSIS OF ORGANIC EMISSIONS FOR THE CHARACTERIZATION OF NON-METALLIC MATERIALS FOR AUTOMOBILES |
| EN ISO 2589:2016 | Leather - Physical and mechanical tests - Determination of thickness (ISO 2589:2016) |
| ISO 17071:2006 | Leather — Physical and mechanical tests — Determination of fogging characteristics |
| EN 15987:2015 | Leather - Terminology - Key definitions for the leather trade |
| ISO 14268:2012 | Leather — Physical and mechanical tests — Determination of water vapour permeability |
| ISO 5402-1:2017 | Leather Determination of flex resistance Part 1: Flexometer method |
| ISO 2418:2017 | Leather — Chemical, physical and mechanical and fastness tests — Sampling location |
| EN ISO 15700:1999 | Leather - Tests for colour fastness - Colour fastness to water spotting (ISO 15700:1998) |
| EN ISO 2418:2017 | Leather - Chemical, physical and mechanical and fastness test - Sampling location (ISO 2418:2017) |
| EN ISO 11640:2012 | Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing (ISO 11640:2012) |
| ISO 23910:2017 | Leather — Physical and mechanical tests — Measurement of stitch tear resistance |
| EN ISO 17071:2011 | Leather - Physical and mechanical tests - Determination of fogging characteristics (ISO 17071:2006) |
| EN ISO 14087:2011 | Leather - Physical and mechanical tests - Determination of bending force (ISO 14087:2011) |
| ISO 4044:2017 | Leather — Chemical tests — Preparation of chemical test samples |
| ISO 2589:2016 | Leather Physical and mechanical tests Determination of thickness |
| ISO 17076-2:2011 | Leather — Determination of abrasion resistance — Part 2: Martindale ball plate method |
| EN ISO 17226-3:2011 | Leather - Chemical determination of formaldehyde content - Part 3: Determination of formaldehyde emissions from leather (ISO 17226-3:2011) |
| VDA 277 : 1995 | NICHTMETALLISCHE WERKSTOFFE DER KFZ-INNENAUSSTATTUNG - BESTIMMUNG DER EMISSION ORGANISCHER VERBINDUNGEN |
| EN ISO 105-B06:2004 | Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test (ISO 105-B06:1998, including Amendment 1:2002) |
| ISO 2420:2017 | Leather — Physical and mechanical tests — Determination of apparent density and mass per unit area |
| ISO 11640:2012 | Leather Tests for colour fastness Colour fastness to cycles of to-and-fro rubbing |
| EN ISO 17227:2002 | Leather - Physical and mechanical tests - Determination of dry heat resistance of leather (ISO 17227:2002) |
| EN ISO 11644:2009 | Leather - Test for adhesion of finish (ISO 11644:2009) |
| EN ISO 14268:2012 | Leather - Physical and mechanical tests - Determination of water vapour permeability (ISO 14268:2012) |
| ISO 17227:2002 | Leather — Physical and mechanical tests — Determination of dry heat resistance of leather |
| VDA 270 : 2016 | DETERMINATION OF THE ODOUR CHARACTERISTICS OF TRIM MATERIALS IN MOTOR VEHICLES |
| EN ISO 17074:2011 | Leather - Physical and mechanical tests - Determination of resistance to horizontal spread of flame (ISO 17074:2006) |
| EN ISO 17228:2015 | Leather - Tests for colour fastness - Change in colour with accelerated ageing (ISO 17228:2015) |
| EN ISO 2419:2012 | Leather - Physical and mechanical tests - Sample preparation and conditioning (ISO 2419:2012) |
| ISO 17186:2011 | Leather — Physical and mechanical tests — Determination of surface coating thickness |
| EN 20105-A02:1994 | Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993) |
| ISO 14087:2011 | Leather — Physical and mechanical tests — Determination of bending force |
| ISO 105-A02:1993 | Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour |
| ISO 17226-3:2011 | Leather — Chemical determination of formaldehyde content — Part 3: Determination of formaldehyde emissions from leather |
| ISO 2419:2012 | Leather — Physical and mechanical tests — Sample preparation and conditioning |
| ISO 17074:2006 | Leather — Physical and mechanical tests — Determination of resistance to horizontal spread of flame |
| ISO 15700:1998 | Leather — Tests for colour fastness — Colour fastness to water spotting |
| ISO 3376:2011 | Leather Physical and mechanical tests Determination of tensile strength and percentage extension |
| EN ISO 5402-1:2017 | Leather - Determination of flex resistance - Part 1: Flexometer method (ISO 5402-1:2017) |
| VDA 230-206 : 2007 | EXAMINATION OF THE STICK-SLIP BEHAVIOUR OF MATERIAL PAIRS PART 1 TO 3 |
| EN ISO 2420:2017 | Leather - Physical and mechanical tests - Determination of apparent density and mass per unit area (ISO 2420:2017) |
| EN ISO 17076-2:2011 | Leather - Determination of abrasion resistance - Part 2: Martindale ball plate method (ISO 17076-2:2011) |
| ISO 17228:2015 | Leather — Tests for colour fastness — Change in colour with accelerated ageing |
| ISO 3377-1:2011 | Leather — Physical and mechanical tests — Determination of tear load — Part 1: Single edge tear |
| EN ISO 23910:2017 | Leather - Physical and mechanical tests - Measurement of stitch tear resistance (ISO 23910:2017) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.